Select Category
_0x200.jpg)
Led Amber 11/64" 12Vac - 8033-Bss - 661-8033F1
Easily installed in any Blue Sea Panel. Simple push-in installation mounts in any thickness material. Useful as general indicator and alarm lights. 11/64" mounting hole size.
Led 6" Oval Sealed Tail Light Kit For Flush Mount - - 590-1159F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed Sonically sealed, waterproofKit includes light, grommet and plug3-Function: Red stop/turn/tail lightWith A70GB grommet and A47PB pigtail, PL-3 connection
Led 6" Oval Sealed Lights For Surface Mount - - 590-1160F1
Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed. Mount in any 360 degree positionSonically sealed, waterproofFlange surface mount-no panel cut-out required3-function: Red stop/turn/tail light
Led 6 Oval White Bkup Lt Grm Mount - 283565 - 274-283565 Superseded By: 158-Bul10Cbpf1
Grommet mount LED lights with 10 diodes are waterproof and meet FMVSS/CMVSS 108 requirements. Approved for vertical or horizontal mounting. Grommet, 3-prong wiring pigtail and 11 gauge steel mounting bracket available separately. 6.42" x 2.28" x 1".
Led 3" Oval Spot/Underwater Light - 6343Ss7 - 23-6343Ss7F1
These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12 VDC systems. 1.5 watts at 12 VDC. Aside from efficiency and performance, Attwood's underwater light is unmatched in ease of installation. Today's underwater lighting products are extremely heavy, require a large thru-hull cut below the water line and involve several additional steps for installation. With only a small hole for wiring and 2 screws for attachment, Attwood's LED surface mount design makes installation as quick and effortless as possible. Backed by a 10-year warranty, Attwood's LED underwater light is designed with the most extreme conditions in mind. Attwood uses only the highest grade stainless components to ensure the product will be resistant to corrosion. To ensure the light is watertight, all electrical components are fully sealed with a proprietary potting compound. These features translate into a lighting product that the customer will likely never have to replace or service as long as they own their boat!
Led 12V Chrome Sidelights Pr - 0602Dp1Chr - 9-0602Dp1Chrf1
For replacement use on power driven vessels under 20 meters (65.6 ft.) in length. 2-mile visibility. Available in chrome plated bronze or white epoxy coated bronze. Uses 10% of the energy draw of standard lights. Low heat, long life and water resistant. Vertical mount. Screw size is 8.
Led (Cree) Docking Lights - 405951-1 - 354-4059511F1
Constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.
