Select Category
_0x200.jpg)
Furuno Retrofit Kit From Simrad NSS16 EVO3 & Garmin GPSMAP®7616 to TZT16F
Furuno RJ45 to HUB102 Cable 0.5M Waterproof RJ45 (M) to RJ45 Adapter
Furuno Rubber Coated Transducer - Type 200B-8B, 2kW, 15M Cable - No Plug
Furuno SS260 Thru-Hull Transducer - Stainless Steel - 1kW - 50/200 - No Plug
Furuno SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency
Furuno SS75M Stainless Steel Thru-Hull Chirp Transducer - 12° Tilt - Med Frequency
Furuno SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency
Furuno Thru-Hull Side-Scan Transducer 12-Pin f/TZtouch3 12, 16 & 19 Models
Furuno TM275LHW Transom Mount CHIRP Transducer w/Temp - 12-Pin Connector f/TZT3
Furuno Touch Encoder Unit f/NavNet TZtouch2 & TZtouch3 - Black - 3M M12 to USB Adapter Cable
Furuno Touch Encoder Unit f/NavNet TZtouch2 & TZtouch3 - Silver - 3M M12 to USB Adapter Cable
Fuse & Junction Block 8 Gang - Fs40570-1 - 11-Fs405701F1
Use with SFE, AGC, or MDL fuses up to 20 AmpCommon bus bar connects hot side of fuses for power feedSeparate bus bar for ground or unfused common hot feedBrass fuse clips, 8-32 stud terminals
Fuse A3T (Class T) 110 Amp - 5112-Bss - 661-5112F1
Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.
Fuse A3T (Class T) 125 Amp - 5113-Bss - 661-5113F1
Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.
Fuse A3T (Class T) 150 Amp - 5114-Bss - 661-5114F1
Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.
Fuse A3T (Class T) 175 Amp - 5115-Bss - 661-5115F1
Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.
Fuse A3T (Class T) 200 Amp - 5116-Bss - 661-5116F1
Fast short circuit response makes this the best choice to protect high amperage electronics equipment such as inverters. 20,000 Amp Interupt Capacity (AIC) UL rated for DC applications under UL189L.
Fuse Agc 10 Amp Slow Blow Glass Tube - 5230-Bss - 661-5230F1
Fuse Anl 100 Amp - 5125-Bss - 661-5125F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 130 Amp - 5126-Bss - 661-5126F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 150 Amp - 5127-Bss - 661-5127F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 175 Amp - 5128-Bss - 661-5128F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 200 Amp - 5129-Bss - 661-5129F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 250 Amp - 5131-Bss - 661-5131F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 300 Amp - 5133-Bss - 661-5133F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 35 Amp - 5164-Bss - 661-5164F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 350 Amp - 5135-Bss - 661-5135F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 40 Amp - 5165-Bss - 661-5165F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 400 Amp - 5136-Bss - 661-5136F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 50 Amp - 5122-Bss - 661-5122F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 500 Amp - 5137-Bss - 661-5137F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 60 Amp - 5123-Bss - 661-5123F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 600 Amp - 5161-Bss - 661-5161F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 750 Amp - 5163-Bss - 661-5163F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Anl 80 Amp - 5124-Bss - 661-5124F1
Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.
Fuse Assy 55 Amp Ss< 79023A56 - 79023T56 - 710-88-79023T56F1
Fuse Assy-90 Amp Ss<88-79023A91 - 8M0207795 - 710-88-8M0207795F1
Fuse Block 4 Gang - Fs40550-1 - 11-Fs405501F1
Use with SFE, AGC, or MDL fuses up to 20 AmpCommon bus bar connects hot side of fuses for power feedSeparate bus bar for ground or unfused common hot feedBrass fuse clips, 8-32 stud terminals
Fuse Block Agc 6 Cir W/Groun - 5015-Bss - 661-5015F1
Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.
Fuse Block Agc 6 Cir. - 5018-Bss - 661-5018F1
Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.
Fuse Block Anl 250 Amp - 5005-Bss - 661-5005F1
Accepts wide range of ANL Fuse amperages for a versatile ignition protected fusing system. Tin-plated copper bus and stainless steel hardware. A 5/16" (M8) stud terminals. Insulation cover with breakouts allow cable access from all directions. Maximum rating: 32 Volts DC.
