Ancor
Ancor 262276 90° Tinned Copper Battery Lug, #1, 3/8" Hole, 2/Pk - 262276 - 639-262276F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262285 90° Tinned Copper Battery Lug, #1/0, 5/16" Hole, 2/Pk - 262285 - 639-262285F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262286 90° Tinned Copper Battery Lug, #1/0, 3/8" Hole, 2/Pk - 262286 - 639-262286F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262295 90° Tinned Copper Battery Lug, #2/0, 5/16" Hole, 2/Pk - 262295 - 639-262295F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262296 90° Tinned Copper Battery Lug, #2/0, 3/8" Hole, 2/Pk - 262296 - 639-262296F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262715 90° Tinned Copper Battery Lug, #3/0, 5/16" Hole, 2/Pk - 262715 - 639-262715F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262725 90° Tinned Copper Battery Lug, #4/0, 5/16" Hole, 2/Pk - 262725 - 639-262725F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 262726 90° Tinned Copper Battery Lug, #4/0, 3/8" Hole, 2/Pk - 262726 - 639-262726F1
90° Bend for ease of wire routing. 100% Tinned copper.
Ancor 270107 Nmea 2000 Through Bulkhead Adaptor - 270107 - 639-270107F1
Simplifies installation when routing through a waterproof bulkhead or panel. Creates a connectoin point for removable equipment such as a computer interface.
Ancor 270109 Nmea 2000 Field Serviceable Connector, Female - 270109 - 639-270109F1
For termination of a bare NMEA cable. Securely terminate bulk cable, or replace a broken end.
Ancor 270110 Nmea 2000 Field Serviceable Connector, Male - 270110 - 639-270110F1
For termination of a bare NMEA cable. Securely terminate bulk cable, or replace a broken end.
Ancor 270111 Nmea 2000 Blanking Cap, Female, 2/Pk - 270111 - 639-270111F1
Cover unused couplers. Protects unused tee connectors from dust and water. 2-pack.
Ancor 270112 Nmea 2000 Blanking Cap, Male, 2/Pk - 270112 - 639-270112F1
Cover unused couplers. Protects unused tee connectors from dust and water. 2-pack.
Ancor 270113 Nmea 2000 Power Isolator - 270113 - 639-270113F1
Used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation.
Ancor 270203 Nmea 2000 Single Device Backbone Starter Kit - 270203 - 639-270203F1
Basic starter kit for adding a new NMEA 2000 network to your boat.Kit includes:(1) Power Cable with Tee, 3.3 ft (1m), #270000(1) Male Terminator, #270106(1) Female Terminator, #270105(1) Single Tee Connector, #270101(1) Drop Cable, 1.64 ft (.5m), #270300(1) Backbone Cable, 16.4 ft (5m), #270005
Ancor 300145 Write-On Identification Heat Shrink Tubing - 300145 - 639-300145F1
Once activated with any heat tool, printing is permanent and will not wash off or erode when exposed to oils, moisture, air or most solvents. Does not have adhesive lining and should not replace regular shrink wrap for terminal ends.
Ancor 301103 Marine Grade® Adhesive Lined Heat Shrink Tubing, 1/8" X 3" , Black, 3/Pk - 301103 - 639-301103F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 301106 Marine Grade® Adhesive Lined Heat Shrink Tubing, 1/8" X 6" , Black, 10/Pk - 301106 - 639-301106F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 301124 Marine Grade® Adhesive Lined Heat Shrink Tubing, 1/8" X 12" , Black, 10/Pk - 301124 - 639-301124F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 301148 Marine Grade® Adhesive Lined Heat Shrink Tubing, 1/8" X 48" , Black, 1/Pk - 301148 - 639-301148F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 302103 Marine Grade™ Adhesive Lined Heat Shrink Tubing, 3/16" X 3" , Black, 3/Pk - 302103 - 639-302103F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 302106 Marine Grade™ Adhesive Lined Heat Shrink Tubing, 3/16" X 6" , Black, 10/Pk - 302106 - 639-302106F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 302124 Marine Grade™ Adhesive Lined Heat Shrink Tubing, 3/16" X 12" , Black, 10/Pk - 302124 - 639-302124F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 302148 Marine Grade™ Adhesive Lined Heat Shrink Tubing, 3/16" X 48" , Black, 1/Pk - 302148 - 639-302148F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
Ancor 302602 Marine Grade® Adhesive Lined Heat Shrink Tubing, 1/4" X 3", Black/Red, 1/1/Pk - 303602 - 639-303602F1
Insulates and protects connections from mechanical abuse, wire pullout and abrasion. Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Shrinks at 257° F/125° C.
