Select Category
Brands
Blue Sea Systems 7701 Ml Series Solenoid Switch, 12V - 7701-Bss - 661-7701F1
500 Amp magnetic latching (bi-stable) solenoid provides switching under load where manual control is not required. Meets ISO 8846 and SAE J1171 external ignition protection requirements. IP66 - protected against powerful water jets. Silver alloy contacts provide high reliability for switching live loadsLED output to remotely indicate switch state - requires optional LED3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistanceOne-piece stainless flange nuts ensure safe and secure connectionsLabel recesses for circuit identificationRetail package includes 2145 Remote Control Contura Switch Specifications:Voltage Maximum Operating (contacts): 32V DCVoltage Maximum Operating (coil): 16V DC (12V DC), 32V DC (24V DC)Amperage Operating Current when changing state: 7A DC (12V DC), 4A DC (24V DC)Remote Control Switch Current: 100 mALive Current Switching: 300A @ 12V DC - 10,000 Cycles
Blue Sea Systems 7702 Ml-Rbs Remote Battery Switch With Manual Control - 24V Dc 500A - 7702-Bss - 661-7702F1
Allows high amp switching under load from remote locations or manually, eliminating long cable runs. Includes remote control switch # 2145 with lockout slide to prevent accidental switching. 24V DC coil controls circuits up to 32V DC and is rated for 500 amps continuous duty and 2500 cranking amps (10 sec.) to handle even large diesel engines. Magnetic latch only draws current when changing the state of switch: it draws no current in the "ON" or "OFF" states. 3/8" Tin plated copper studs.
Blue Sea Systems 7720 Midi® Or Ami® Safety Fuse Block - 7720-Bss - 661-7720F1
Ignition protected for installation on gasoline/diesel powered boats Sealed cover protects fuses from the harsh marine environment and satisfies ABYC/USCG insulation requirementsCover breakouts allow wire access in three directionsOne-piece stainless flange nuts ensure safe and secure connectionsAccepts square format standard or custom labelFuses sold separatelySpecificationsVoltage Max. Operating 32V DCWire Size to Meet Rating #2/0 AWG (70 mm²)Mounting holes Accept 1/4" (M6) ScrewsTerminal Stud Size M8Terminal Screw Size M5 Stainless Steel
Blue Sea Systems 7900 Spare Key For 6005 - 7900-Bss - 661-7900F1
Spare key for 6005
Blue Sea Systems 7903 Spare Key For 6004 - 7903-Bss - 661-7903F1
SPARE LOCKING KEY FOR M SERIES BATTERY SWITCH
Blue Sea Systems 8003 Dc Analog Voltmeter - 8-16V Dc - 8003-Bss - 661-8003F1
Meters with backlighting for low light conditions. Can be either surface or panel mount. (Separate 12V or 24V connection required for lighting) Voltmeter: 8-16 Volt DC scale in .2 volt increments. Simple 4 wire connectionBacklit meter face (separate 12 or 24V DC backlight connections)Face size: 2-3/4"DIN Meters include a terminal cover included to prevent accidental short circuitDIN Meters are a standard European 72mm designDIN Meter face is white matte with black printed scale and knife-edge pointer
Blue Sea Systems 8015 Dc Analog Voltmeter Panel - 8 To 16V Dc - 8015-Bss - 661-8015F1
8-16 VDC Voltmeter with a 3 position switch for multiple battery banks. Full size 2-3/4" meter. 3-3/4"H x 5-1/4"W.
Blue Sea Systems 8017 Dc Analog Ammeter - 0-100A With Shunt - 8017-Bss - 661-8017F1
Meters with backlighting for low light conditions. Can be either surface or panel mount. (Separate 12V or 24V connection required for lighting) Ammeters: All models include either an internal or external shunt as noted. Includes appropriate external DC shunt when requiredSimple 4 wire connectionBacklit meter face (separate 12 or 24V DC backlight connections)Face size: 2-3/4"DIN Meters include a terminal cover included to prevent accidental short circuitDIN Meters are a standard European 72mm designDIN Meter face is white matte with black printed scale and knife-edge pointer
Blue Sea Systems 8022 Dc Analog Ammeter - 0-50A With Shunt - 8022-Bss - 661-8022F1
Meters with backlighting for low light conditions. Can be either surface or panel mount. (Separate 12V or 24V connection required for lighting) Ammeters: All models include either an internal or external shunt as noted. Includes appropriate external DC shunt when requiredSimple 4 wire connectionBacklit meter face (separate 12 or 24V DC backlight connections)Face size: 2-3/4"DIN Meters include a terminal cover included to prevent accidental short circuitDIN Meters are a standard European 72mm designDIN Meter face is white matte with black printed scale and knife-edge pointer
Blue Sea Systems 8023 Traditional Metal Dc Circuit Breaker Panel - 8 Positions - 8023-Bss - 661-8023F1
Traditional metal panels provide DC Branch switching and circuit protection. All positive, negative, and grounding busses installed. Backlit label positions. Includes set of 30 common DC labels. For 12 or 24 Volt DC Systems.
Blue Sea Systems 8025 Traditional Metal Dc Circuit Breaker Panel - 3 Positions - 8025-Bss - 661-8025F1
Traditional metal panels provide DC Branch switching and circuit protection. All positive, negative, and grounding busses installed. Backlit label positions. Includes set of 30 common DC labels. For 12 or 24 Volt DC Systems.
Blue Sea Systems 8027 Traditional Metal Circuit Breaker Panel - Ac Main + 6 Positions - 8027-Bss - 661-8027F1
Has 8 total circuit breaker positions, Red reverse polarity-indicating LED, and a set of 30 common AC labels, backlt label positions. This has 3, 15A A-series branch circuit breakers installed and 1 double-pole 30A AC main circuit breaker.
Blue Sea Systems 8029 Traditional Metal Panel Ac Main + 1 Position - 8029-Bss - 661-8029F1
Features 3 total circuit breaker positions. Red reverse polarity indicating LED. All hot, neutral and safety ground buses installed, fully pre-wired. One 30A double-pole A-series circuit breaker.
Blue Sea Systems 8043 Traditional Metal Circuit Breaker Panel - Ac Main + 3 Positions, Ac Voltmeter - 8043-Bss - 661-8043F1
Features 5 total breaker positions, Red reverse polarity indicating LED, all hot, neutral and safety ground buses installed and fully prewired. Includes a set of 30 common AC labels. 3-15A A-series circuit breakers installed and one double-pole 30 AC, A series main circuit breaker, 0-150V AC voltmeter.
Blue Sea Systems 8051 Traditional Digital Voltmeter Panel - 7 To 60V Dc - 8051-Bss - 661-8051F1
Includes 8235 DC digital voltmeter which reads 0-60V DC at .01V resolution with a manual sleep mode.
Blue Sea Systems 8053 Contura Water Resistant 12V Dc 6 Position Panel, Gray - 8053-Bss - 661-8053F1
Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels.
Blue Sea Systems 8054 Contura Water Resistant 12V Dc 3 Position Panel, Gray - 8054-Bss - 661-8054F1
Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels.
Blue Sea Systems 8058 120V Ac 3 Position Circuit Breaker Panel - 8058-Bss - 661-8058F1
AC Branch panels distribute current from a high amperage input into lower amperage circuits. Styled to match existing panels, the traditional metal panels are equally suited for use as extensions to existing panels or as full replacements.All panels are pre-wired and include LEDs in all positions and label backlighting. Marine grade aluminum frame securely holds fixed panel components and is chemically treated to resist corrosion. Includes 8031 label set and 3 15A breakers w/white toggles. Max 100 amps.
Blue Sea Systems 8059 Ac 8 Position Circuit Breaker Panel - 8059-Bss - 661-8059F1
AC Branch panels distribute current from a high amperage input into lower amperage circuits. Styled to match existing panels, the traditional metal panels are equally suited for use as extensions to existing panels or as full replacements.All panels are pre-wired and include LEDs in all positions and label backlighting. Marine grade aluminum frame securely holds fixed panel components and is chemically treated to resist corrosion. Includes 8031 label set and 5 15A breakers w/white toggles. Max 100 amps.
Blue Sea Systems 8068 Dc 13 Position Circuit Breaker Panel - 8068-Bss - 661-8068F1
Features 13 circuit breaker positions, ten 15A installed. 8-16 Volt voltmeter with 3 position switch for multiple battery banks. 0-50 amp ammeter with remote shunt. All positive, ground and grounding buses installed, fully pre-wired. Comes with a set of 30 common labels.
Blue Sea Systems 8074 Ac Main + 8 Positions Circuit Breaker Panel - 8074-Bss - 661-8074F1
Ten total circuit breaker positions, 3 blank. Red reverse polarity indicating LED. 0-50 ampere ammeter with remote sensing coil. All hot, neutral and safety ground buses installed, fully pre-wired. Includes set of 30 common AC labels. Five 15 amp circuit breakers installed. One double-pole 30 amp AC main circuit breaker installed. 0-150 volt AC voltmeter. Dimensions: 11.25" H x 5.25" W
Blue Sea Systems 8081 Traditional Metal Dc Circuit Breaker Panel - 5 Positions - 8081-Bss - 661-8081F1
Traditional metal panels provide DC Branch switching and circuit protection. All positive, negative, and grounding busses installed. Backlit label positions. Includes set of 30 common DC labels. For 12 or 24 Volt DC Systems.
Blue Sea Systems 8082 Dc 10 Position Circuit Breaker Panel - 8082-Bss - 661-8082F1
Features 10 total circuit breaker positions with seven 15A circuit breakers included. 8-16 volt voltmeter with 3-position switch for multiple battery banks. 0-50 amp ammeter with remote shunt. All positive, ground and grounding buses installed, fully pre-wired.
Blue Sea Systems 8084 Ac Main + 6 Positions/Dc Main + 15 Positions Circuit Breaker Panel - 8084-Bss - 661-8084F1
Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wiredLabel backlighting pre-installedAll LEDs installedMaximum panel Amperage: 100 Amps DC / 30 Amps AC AC FeaturesRed reverse polarity indicating LEDReady for installation of optional 4029 AC Isolation Cover9353, 0-150 volt AC voltmeter DC Features100 amp C-Series circuit breaker provides main circuit protection and switching for DC branch circuits8003, 8-16 volt DC voltmeter8017, 0-100 amp DC mmeterOwner upgradeable to 24 volts with 8240, 18-32 volt DC voltmeter
Blue Sea Systems 8086 Ac 3 Sources + 12 Positions & Transfer/Dc Main + 19 Positions Circuit Breaker Panel - 8086-Bss - 661-8086F1
Includes set of 30 common AC and 30 common DC labels All AC and DC buses installed, fully pre-wiredRed reverse polarity indicating LEDReady for installation of optional 4029 AC Isolation Cover9353, 0-150 volt AC voltmeter DC Features100 amp C-Series circuit breaker provides main circuit protection and switching for DC branch circuits8003, 8-16 volt DC voltmeter8017, 0-100 amp DC mmeterOwner upgradeable to 24 volts with 8240, 18-32 volt DC voltmeter
