Select Category
Brands
Cole Hersee 880062Bp Sr Series Master Disconnect Switch - 880062-Bp - 12-880062Bpf1
Isolates the batteries and eliminates battery drain when vehicle or vessel is stored overnight or longer periods. Black plastic construction will not corrode, stands up to roadsplash & salt sprayIngress protected to IP67/ IP69KDepth of only 3" (knob front to end of studs), to install in locations with limited space behind panelIgnition protected to SAE J1171 and ISO 8846 for installation in a battery boxStainless steel hardware and tin-plated copper contactSPST. Rating: 32V. Current Rating (Continuous) 300A
Cole Hersee 90030Bp Heavy Duty Push Button Switch W/Plated Steel Housing - 90030-Bp - 12-90030Bpf1
Recessed face nut designed to prevent accidental actuation. 2 screw terminals. O-Ring seal in the mounting stem. 5/8"-32 x 21/32"L stem. 35A @ 12V, 20A @ 24V rating.
Cole Hersee 9579Bp 4 Position Key Ignition Switch - 9579-Bp - 12-9579Bpf1
Standard body series is designed for universal applications within harsh environments. Acc/Off/Acc-Ign/Start without spring return or anti-restart. Key is removable in 'OFF' Position Only (where applicable). 4 screw terminals, zinc diecast housing. Face nut mount through 0.75" (19mm) 20 Panel Hole. 5A @ 12V DC (Start), 10A@12V DC (Acc, Ign/Run)
Cole Hersee Co. 24059Bp 12V Spst 65 Amp Solenoid - 24059-Bp - 12-24059Bpf1
Continuous duty solenoid. Insulated, with steel housing. Normally open contacts, one circuit: Off/On. 85A continuous.
Cole Hersee Fhas100Bp Sealed Ato In-Line Fuse Holder - Fhas100-Bp - 12-Fhas100Bpf1
Sealed in-line fuse holder designed to allow easy installation into potentially wet outside environments. Rated IP67 with sealed cover for moisture & dust resistance. Includes two 8" red GXL wire leads. Max Voltage: 32V DC. Fuse sold separately.
Cole Hersee Fhms200Bp Sealed Mini In-Line Fuse Holder - Fhms200-Bp - 12-Fhms200Bpf1
Sealed in-line fuse holder designed to allow easy installation into potentially wet outside environments. Rated IP67 with sealed cover for moisture & dust resistance. Includes two 8" red GXL wire leads. Max Voltage: 32V DC. Fuse sold separately.
Cole Hersee M284Bp 6-12V Battery Disconnect Swtch - M-284-Bp - 12-M284Bpf1
Single Pole. Two positions: Off-On. Rating: 6-36V DC; 175A continuous, 1000A intermittent /175A continuous. Die cast lever. Brass case. Long stem: 3/4" -16 thread. Dia. x 1-13/32 Long. Terminals: two 3/8" dia. studs. Fits panels up to 15/16" thick.
Cole Hersee M482 Switch Push-Pull, Bulk - M-482-Bx - 12-M482F1
1 circuit. Normally off. 2 positions: Off/On. Chrome plated brass knob face dia: 7/8". Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M485Bp Push Button Switch, Packaged - M-485-Bp - 12-M485Bpf1
Normally OFF. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Gasket sealed case protects against moisture and dust. Mounting stem is 5/8"-32 by 1" long. 2 brass terminals. Fits panels up through 3/4" thick.
Cole Hersee M531Bp 2 Circuit Push Pull Switch - M-531-Bp - 12-M531Bpf1
2 circuit. Normally off. 3 positions: Off - On #1 - On #2. Knob face dia: 3/4". Face nut, washer and hexnut. Permits two circuits (i.e., anchor and running lights) to be operated independently with one switch. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M532Bp Off-On-On Push-Pull 3 Circuit - M-532-Bp - 12-M532Bpf1
2 circuits. Normally off. 3 positions: Off - On #1 & #2 - On #1 & #3. Knob face dia.: 3/4". Especially suited for multiple lighting circuits such as cabin, anchor and running lights. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee M5411102Bp Toggle Switch/Illuminated Tip, On/Off/On Spdt - M-54111-02-Bp - 12-M5411102Bpf1
Illuminates red in the On position/Clear in the Off position. Black plastic housing and actuator. Silver contacts. 15/32" mounting stem. Blade terminals. Round lens in toggle tip. 25 Amps at 12V DC.
Cole Hersee M550Bp Battery Ignition Switch - M-550-Bp - 12-M550Bpf1
3 Positions Off - Ign - Ign/StartAll-Brass Construction. Chrome plated brass face nut. Brass mounting stem 13/16" - 24 x 1-7/32". 3 brass screw terminals. Rating at 12V: 10A ignition, 5A start.
Cole Hersee M606Bp Push-Pull Switch, Pvc Coated - M-606-Bp - 12-M606Bpf1
One circuit switch. Normally off. Two positions: off/on. S.P.S.T. Plasticized body sealed against moisture and dirt. Two 18 gauge insulated copper wire leads, 12" long. Mounting stem is 3/8" diameter and is complete with chrome plated brass knob and face nut. Knob face diameter is 7/8". Mounts in panels up to 5/8" thick. Rating 10A @ 12VDC, 6-36VDC. Boxed.
Cole Hersee M612Bp Momentary Push Button Switch Spst - M-612-Bp - 12-M612Bpf1
Normally Off. Off - Mom On (when button is depressed). Marine construction: brass case, plunger, hardware. Chrome-plated pushbutton and facenut. Oversized facenut helps prevent accidental actuation. Silver contacts. Fits panels up to 1" thick.
Cole Hersee M626 Push Button Switch, Bulk - M-626-Bx - 12-M626F1
Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with a protective barrier between terminals. Mounting stem 5/8"-32 diameter, 1-3/8" long. Fits panels up through 1" thick. Includes 407-03 black moisture repellent rubber button cover.
Cole Hersee M626Bp Push Button Switch - M-626-Bp - 12-M626Bpf1
Normally off. S.P.S.T. Two positions: off - momentary on. On with button depressed. Spring return to off. Silver contacts. Molded plastic insulator with a protective barrier between terminals. Mounting stem 5/8"-32 diameter, 1-3/8" long. Fits panels up through 1" thick. Includes 407-03 black moisture repellent rubber button cover.
Cole Hersee M628 Push Pull Switch Chrome - M-628-Bx - 12-M628F1
1 circuit. Normally off. 2 positions: Off/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Boxed.
Cole Hersee M628Bp Off-On Push Pull Switch - M-628-Bp - 12-M628Bpf1
1 circuit. Normally off. 2 positions: Off/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee M630Bx On-On Push Pull Switch - M-630-Bx - 12-M630Bxf1
2 circuit. Normally on. 2 positions: On/On. Features non-corrosive construction. Gasket sealed case protects against moisture and dust. Brass mounting stem: 3/8" -32 x 1-1/4"L complete with chrome plated brass knob & face nut, washer, and hex nut for mounting. Mount in panels up to 1" thick. Rating 10A @ 12VDC. 6-36VDC. Brass housing. Carded.
Cole Hersee Mahcbp Maxi®_Mah Series In-Line Blade Fuse Holder - Mahc-Bp - 12-Mahcbpf1
32V In-Line blade fuse holder compatible with MAXI® blade-style fuses up to 60amps (sold separately). Center body hole enables easy mounting to a bulkhead. Heat-resistant thermoplastic housing and tethered fuse holder cover protects an installed MAXI® blade-style fuse up to 60 amps.
Cole Hersee Pl6Abp 12V Pilot Light, Amber Led - Pl-612-A-Bp - 12-Pl612Abpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Bbp 12V Pilot Light, Blue Led - Pl-612-B-Bp - 12-Pl612Bbpf1
12V DC Solid-state LED never needs replacement 12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Pl6Gbp 12V Pilot Light, Green Led - Pl-612-G-Bp - 12-Pl612Gbpf1
12V DC Solid-state LED never needs replacementBright chrome-plated body, bezel, washer and hexnutQuick connect 0.25" terminalsBody length: 1.248", max. bezel dia. 0.63"Mounting hole: 0.55" dia. Fits in panels 0.02"-0.3" thick
Cole Hersee Xxx Weather Resistant Rocker Switch, (On)/Off, Spst - M-58031-07-Bp - 12-M5803107Bpf1
Certified to IP66 and IP68 for complete protection against dust and prolonged spray and submersion under pressure. Supplied with neoprene mounting gasket/panel seal. Ignition protected. Black plastic housing. Silver contacts. Removable actuators. 20 amps at 12 VDC. On in parenthesis (On) indicates a momentary position.
