Select Category
Brands
Flow-Rite Mb006 Qwik-Lok™ Pump-Out Aerator Bundle 3/4" - Mb-006 - 81-Mb006F1
Convert your existing recuirclation pump into a PowerStream Pump-Out Aerator Combo with this bundle. By simply pulling the red aerator head, water is diverted from the livewell to the Included pump-out thru-hull. ^Kit Includes:Pump-out aerator, Pump-out thru-hull, 3/4" Qwik-Lok straight sockets (3), 3/4" Qwik-Lok 90° socket, Hose Clamps, 3/4" x 8' Hose.
Flow-Rite Mp103 Pro Timer, Packaged - Mp-103 - 81-Mp103F1
Flow-Rite's Livewell Pro Timer is a high-quality digital timer designed specifically for use in livewell systems. This compact and easy-to-use timer allows you to control the frequency and duration of the water circulation in your livewell, ensuring that your bait or catch stays healthy and alive for longer periods of time. The Livewell Pro Timer is the perfect solution for any angler looking to maximize the performance of their livewell system. The timer can be programmed to run in continuous mode, or set to run for preset intervals of 1, 2, 3, or 4 minutes, with a maximum run time of 12 hours. The Livewell Pro Timer is compatible with all Flow-Rite livewell systems and can be easily installed in just a few minutes.ProTimer automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer to the desired interval and concentrate on fishing. ProTimer conserves battery life, is easy to install and operate. It can be connected to an exisiting switch in your boat. Automatic operation increases fishing timeIdeal for tournament fishingAdjustable time delay feature to meet specific ambient conditionsConserves battery life, is easy to install and easy to operateColor coding promotes ease of proper operationSelf-adhesive backing for easy installation; eliminates mounting screwsWeather resistant Poly coated circuit board
Flow-Rite Mp104 Pro Timer Plus+, Packaged - Mp-104 - 81-Mp104F1
Flow-Rite's Livewell Pro Timer Plus™ is a high-quality digital timer designed specifically for use in livewell systems. This compact and easy-to-use timer allows you to control the frequency and duration of the water circulation in your livewell, ensuring that your bait or catch stays healthy and alive for longer periods of time. The Livewell Pro Timer Plus™ is the perfect solution for any angler looking to maximize the performance of their livewell system. The timer can be programmed to run in continuous mode, or set to run for preset intervals of 1, 2, 3, or 4 minutes, with a maximum run time of 12 hours. The Livewell Pro Timer Plus™ is compatible with all Flow-Rite livewell systems and can be easily installed in just a few minutes.ProTimer Plus™ automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer Plus™ to the desired interval and concentrate on fishing. ProTimer Plus™ conserves battery life, is easy to install and operate. It can be connected to an exisiting switch in your boat.ProTimer Plus+ comes with a master control switch to control on, off, or timed livewell operations. 1 Minute on / adj. 1-12 minutes offIncludes 3 position rocker switch for off, timed or constant runFor use with any livewell recirculation pump or Flow-Rite valve system with "RECIRC" modeAuto operation increases fishing timeIdeal for tournament fishingAdjustable time delay feature to meet specific ambient conditionsHelps to increase battery lifeColor coding promotes easy operationSelf-adhesive backing for easy installation; eliminates screwsWeather resistant poly coated circuit board
Flow-Rite Mpa018 Snap-In Strainer, 3/4" - Mpa-018 - 81-Mpa018F1
#316 Stainless strainer screen for fresh and saltwater use. Strainer snap-in feature provides a positive vibration proof lock, yet can easily be removed for cleaning.
Flow-Rite Mpc101100 System 1 Open/Close Actuator For V1 Series - Mpc-1-01-100 - 81-Mpc101100F1
Flow-Rite System 1 Actuator For V1 Series
Flow-Rite Mpc103100 System 3 Recirc/Empty/Auto Actuator For V3 Series - Mpc-1-03-100 - 81-Mpc103100F1
Flow-Rite System 3 Actuator For V3 Series
Flow-Rite Mpc104100 System 3 Fill/Empty/Recirc Actuator For V4 Series - Mpc-1-04-100 - 81-Mpc104100F1
Flow-Rite System 3 Actuator For V4 Series
Flow-Rite V1 - 2 Position Shut Off Valve W/Barbed Connection - Mpv-01-Fn-01 - 81-Mpv01Fn01F1
The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. Remote drain control for any boat's livewell, baitwell or cooler. Provides OPEN / CLOSED modes
Flow-Rite V1 - 2 Position Shut Off Valve W/Quick Lock Connection - Mpv-11-Fn01 - 81-Mpv11Fn01F1
The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. Features dual seals for positive shut-off in the "CLOSED" position and a straight unrestricted flow path in the "OPEN" position. This valve is non-directional. Remote drain control for any boat's livewell, baitwell or cooler. Provides OPEN / CLOSED modes
Flow-Rite V2 - 2 Position Automatic Valve, Rear Cable Approach - Mpv-02-Rn01 - 81-Mpv02Rn01F1
The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the operator only has to decide whether he wants his livewell functioning or empty. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. Ideally used in bassboats, flats boats, and other low profile boats for automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Provides EMPTY / AUTO modes
Flow-Rite V3 - 3 Position Automatic Valve, Front Cable Approach - Mpv-03-Fn01 - 81-Mpv03Fn01F1
Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed "RECIRC" position. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out /Venturi Aerator, place the valve in the "RECIRC" position. To empty, simply turn off the pump and move the valve to the "EMPTY" position for gravity draining. Ideally used in bassboats, flats boats, and other low profile boats for Automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculationIncludes closed recirculation mode which allows addition of optional pump-out system.Provides RECIRC / EMPTY / AUTO modes
Flow-Rite V3 - 3 Position Automatic Valve, Rear Cable Approach - Mpv-03-Rn01 - 81-Mpv03Rn01F1
Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed "RECIRC" position. When the first fish is caught, place the valve in the "AUTO" position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valve's check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out /Venturi Aerator, place the valve in the "RECIRC" position. To empty, simply turn off the pump and move the valve to the "EMPTY" position for gravity draining. Ideally used in bassboats, flats boats, and other low profile boats for Automatic drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculationIncludes closed recirculation mode which allows addition of optional pump-out system.Provides RECIRC / EMPTY / AUTO modes
Flow-Rite V4 - 3 Position Select Valve, Front Cable Approach - Mpv-04-Fn01 - 81-Mpv04Fn01F1
The V4 valve allows a standard aerator pump to be mounted directly to the valve body for both filling and recirculation duties, thus eliminating the need for 2 separate pumps and additional plumbing. When in the "FILL" position, the valve will close the livewell drain side of the valve so the pump has free access to fresh outside water. Once the livewell is full, the valve is placed in the "RECIRC" position to close the drain and allow full recirculation of the livewell water. Occasionally returning to the "FILL" position will keep the livewell topped off and freshened. The "EMPTY" position allows gravity draining with the pump off. Any additional fill or recirculation pump is optional and only becomes a true back-up to the main system pump. Once the system is put into the "AUTO" position and the pump turned on, all livewell functions are handled so the angler can concentrate on fishing. Ideally used in walleye boats or other high profile boats for drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Includes closed recirculation mode which allows addition of optional pump-out systemProvides FILL / EMPTY / RECIRC modes
Flow-Rite V4 - 3 Position Select Valve, Rear Cable Approach - Mpv-04-Rn01 - 81-Mpv04Rn01F1
The V4 valve allows a standard aerator pump to be mounted directly to the valve body for both filling and recirculation duties, thus eliminating the need for 2 separate pumps and additional plumbing. When in the "FILL" position, the valve will close the livewell drain side of the valve so the pump has free access to fresh outside water. Once the livewell is full, the valve is placed in the "RECIRC" position to close the drain and allow full recirculation of the livewell water. Occasionally returning to the "FILL" position will keep the livewell topped off and freshened. The "EMPTY" position allows gravity draining with the pump off. Any additional fill or recirculation pump is optional and only becomes a true back-up to the main system pump. Once the system is put into the "AUTO" position and the pump turned on, all livewell functions are handled so the angler can concentrate on fishing. Ideally used in walleye boats or other high profile boats for drain control and livewell management. Accepts mounting of one standard aerator pump for both filling and recirculation. Includes closed recirculation mode which allows addition of optional pump-out systemProvides FILL / EMPTY / RECIRC modes
Flowrite Mardp006 Sealock Remote Draing Plug W/6' Cable - Ma-Rdp-006 - 81-Mardp006F1
The SeaLok Remote Drain Plug is an innovative solution for water drainage in boats. This product features a reliable and easy-to-use design, with a cable that runs from the plug to a convenient location on the boat's surface for quick access. The cable can be extended or retracted as needed, allowing for customized positioning to fit different boat configurations. Compact size allows it to fit in tight spaces. No drilling needed. Max. transom thickness: 3/4".
Flowrite Mardp008 Sealock Remote Draing Plug W/8' Cable - Ma-Rdp-008 - 81-Mardp008F1
The SeaLok Remote Drain Plug is an innovative solution for water drainage in boats. This product features a reliable and easy-to-use design, with a cable that runs from the plug to a convenient location on the boat's surface for quick access. The cable can be extended or retracted as needed, allowing for customized positioning to fit different boat configurations. Compact size allows it to fit in tight spaces. No drilling needed. Max. transom thickness: 3/4".
Flowrite Mardp010 Sealock Remote Draing Plug W/10' Cable - Ma-Rdp-010 - 81-Mardp010F1
The SeaLok Remote Drain Plug is an innovative solution for water drainage in boats. This product features a reliable and easy-to-use design, with a cable that runs from the plug to a convenient location on the boat's surface for quick access. The cable can be extended or retracted as needed, allowing for customized positioning to fit different boat configurations. Compact size allows it to fit in tight spaces. No drilling needed. Max. transom thickness: 3/4".
Flt Sngls Clsc 6Pc Wh Bk Bl Watersports / Rv - Ahs50139Cpq - 253-Ahs50139Cpqf1
Fluid/Oil Extractor, 7.5 Qt. - 69362 - 452-69362F1
This economical, large capacity fluid extractor provides an easier, cleaner way to drain engines with hard to reach drain plugs. Ideal for most fluid extraction (not for corrosive fluids), it includes a tethered cap, easy pour spout, a black 3/32" x 6' extraction tube and clear 11/32" x 6' drain tube. Tubes wrap around tank and are held by storage clamp.
Flush Hatch Dog - 0777000Chr - 9-0777000Chrf1
For securely "Dogging" (fastening) deck hatches. Chrome plated brass and stainless steel lock nuts. Flush strike. O-ring seals for water resistance. Does not rattle when dogged down. Maximum hatch thickness 2".
Flush Hatch Lifting Ring (1) - 0575Dp0Chr - 9-0575Dp0Chrf1
Chrome plated.
Flush Hinge - 0272Dp0Chr - 9-0272Dp0Chrf1
Chrome plated stamped brass. Semi concealed, for overlay doors.
