Select Category
Brands
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-6687 - 342-Gsni6687F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-7145 - 342-Gsni7145F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Hardline Black Nitride Shaft Gas Spring - Gsni-7903 - 342-Gsni7903F1
Combines all the proven reliability you've come to expect from an SPD Gas Spring along with the added feature of a nitride shaft. The GSNI Gas Spring incorporates a strong annealed steel rod with a Nitride coating for added corrosion resistance, especially when used with the all composite PS130 end fitting. This gas spring is an ideal choice where exceptional quality, combined with an overall black appearance, are important for your application. GAS SPRING FIT AND SELECTIONIf you already have a gas spring installed, selecting a replacement can be as simple as A-B-C. A. Measure the extended length from center mounting hole to center mounting hole (see "A" in diagram). B. Measure the amount of piston that is exposed while extended. This is called the stroke of the gas spring. (see "C" in diagram). C. Find the extended length that is the closest to your current unit. Then use either the stroke measurement or subtract the stroke from extended and select the compressed sizes that are closest to your current spring.(The measurements do not have to be exact but the closer you can match the original the easier it will be to install.) SELECTING THE FORCE - If your current spring has a stamped label, the force should be listed within that number. Usually, the last two digits or followed by the letter N which is Newtons. One pound equals 4.4482 Newtons. This is the pounds of force being exerted to open or hold open the door or platform. It does not equal the weight of the item being lifted. Trial and error is not the best way to find that number.
Jr Products Heavy Duty On/Off/Momentary-On Rv Switch - 12825 - 342-12825F1
Ratings: DPDT, 20 Amp @ 125 VAC, 15 Amp @ 250 VAC, 40 Amp @ 12 VDCUL/CSA/VDE approvedCutout: 1.25" x .84"Switch: 2.75" x 1.80"
Jr Products Heavy Duty On/Off/Momentary-On Rv Switch - 12835 - 342-12835F1
Ratings: DPDT, 20 Amp @ 125 VAC, 15 Amp @ 250 VAC, 40 Amp @ 12 VDCUL/CSA/VDE approvedCutout: 1.25" x .84"Switch: 2.75" x 1.80"
Jr Products Hitch Pin/Hitch Pin Clip Combo - 1065 - 342-01065F1
A replacement combination of our high quality hitch pin and hitch pin clip. Constructed of durable chromatic plated steel. Never guess if your clip or pins will fit each other, simply buy a matched set.
Jr Products Hitch Pin/Hitch Pin Clip Combo - 1074 - 342-01074F1
A replacement combination of our high quality hitch pin and hitch pin clip. Constructed of durable chromatic plated steel. Never guess if your clip or pins will fit each other, simply buy a matched set.
Jr Products Hitch Pin/Hitch Pin Clip Combo - 1144 - 342-01144F1
A replacement combination of our high quality hitch pin and hitch pin clip. Constructed of durable chromatic plated steel. Never guess if your clip or pins will fit each other, simply buy a matched set.
Jr Products Hth-A Dual Voltage Rv Holding Tank Heater - Hth-A - 342-Hthaf1
Use on either fresh water or septic tank Dual voltage ready for 12V and 110V applicationsThermostatically controlled and active at 34° F24" ground wireDraws approximately 1 Amp AC and 10 Amps DCMultiple heaters may be used where needed
Jr Products Inside L-Handle - 10905 - 342-10905F1
This unit is used on the interior of popular T and L locking handles. It provides the ability to open the doors from inside the truck cap or compartment. Fits most square-shaft operating handles. Lifetime warranty.
Jr Products Interior Cable Tv Plate - 47785 - 342-47785F1
Interior Cable TV Plate has a 75 ohm F-Style connection. Works for any F-Style TV or satellite installations. Can be used in HD/Satellite TV connections. 2.34" x 4.50"
Jr Products Kappet Screws With Covers, Beige, 14/Pk - 20425 - 342-20425F1
Can be used any where you need to secure an item with a screw but desire a clean, finished look. Special mounting screws included. Lifetime warranty.
Jr Products Kappet Screws With Covers, White, 14/Pk - 20415 - 342-20415F1
Can be used any where you need to secure an item with a screw but desire a clean, finished look. Special mounting screws included. Lifetime warranty.
Jr Products Labeled 12V 5 Pack Rv On/Off Switches - 12581-5 - 342-125815F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V 5 Pack Rv On/Off Switches - 12591-5 - 342-125915F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V 5 Pack Rv On/Off Switches - 12611-5 - 342-126115F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V On/Off Switch, Black - 12595 - 342-12595F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V On/Off Switch, Black - 12615 - 342-12615F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V On/Off Switch, Brown - 12605 - 342-12605F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Labeled 12V On/Off Switch, White - 12585 - 342-12585F1
Ratings: SPST, 16 Amps @125 VAC, 12 Amp @ 250 VAC, 3/4H.P. @ 125-250 VAC, 10 Amps @ 14VDCUL/CSA/VDE/RoHS approvedCutout: 1.125" x .550"Switch: 1.120" x .547"
Jr Products Large Cabinet Strike - 70445 - 342-70445F1
Lifetime Warranty.
Jr Products Large Rv Kitchen Sink Strainer - 95285 - 342-95285F1
Fits any sink opening 3-1/2" - 4" Constructed of plastic or stainless steelIncludes: strainer, rubber washer and lock nut
Jr Products Large Rv Kitchen Sink Strainer - 95295 - 342-95295F1
Fits any sink opening 3-1/2" - 4" Constructed of plastic or stainless steelIncludes: strainer, rubber washer and lock nut
Jr Products Large Sliding Eye Curtain Carrier, Type A - 81085 - 342-81085F1
Lifetime warranty.
Jr Products Large Window Latch - 81875 - 342-81875F1
Replaces most top mounted groove strike latches 2.25" mounting patternMounting screws includedLifetime warranty
