Select Category
Brands
Perko Stealth Ii Series Led Bi-Color Ss Bow Light - 0615Dp2Sts - 9-0615Dp2Stsf1
Horizontal mount. 12V. USCG certified for use on power vessels under 12 m (39.4 ft). 2 Nautical mileStainless steelUltra low profile with 1/2" vertical height2-1/2" L x 2-5/8" W
Perko Tank Vent W/Swivel Elbow, Black - 0571Dp4Blk - 9-0571Dp4Blkf1
Removable 30 mesh stainless wire screen flame arrestor for use with fuel. Zinc alloy elbow with black plastic cap.
Perko Transom/Locker Vent, 6" Chrome/Brass - 1271Dp0Chr - 9-1271Dp0Chrf1
Chrome plated brass w/an anodized aluminum expanded mesh screen. Screw size is 8.
Perko White Plastic Gas Fill & Tank Vent W/Straight Neck - 1319Dpgwht - 9-1319Dpgwhtf1
Plastic. Integral tank vent with flame arrestor. No plate key or ground wire required. Connects to 1-1/2" fill hose and 5/8" vent hose. Flip top cap. Use #10 screws.
Perko Windshield/Hatch Adjuster, 8" - 1116Dp1Chr - 9-1116Dp1Chrf1
Chrome plated brass and zinc, black plastic knob.
Permanent Strength Threadlocker Red - 26240 - 180-26240F1
OEM specified. A permanent, high strength product that is applied to fasteners 3/8" to 1" (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts.
Permapoxy™ 5 Minute General Purpose Epoxy - 84101 - 180-84101F1
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI.
Permatex 24005 Medium Strength Threadlocker Blue Gel, 5 Gr., Blue - 24005 - 180-24005F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Permatex 24200 - 242 Blue Threadlocker Tube, 6 Ml. - 24200 - 180-24200F1
Threadlocker Blue eliminates the need for lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects thread from corrosion. Medium strength for easy disassembly.
Permatex 24240 - 242 Blue Threadlocker Bottle, 36 Ml. - 24240 - 180-24240F1
Threadlocker Blue eliminates the need for lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects thread from corrosion. Medium strength for easy disassembly.
Permatex 24835 Medium Strength Threadlocker Blue Gel, 35 Gr., Blue - 24835 - 180-24835F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Permatex 25005 High Strength Removable Threadlocker Gel, 5 Gr., Orange - 25005 - 180-25005F1
Permatex® High Strength Removable Orange Threadlocker Gel is a hybrid formula that combines the strength of Red Threadlocker with the removability of Blue Threadlocker. Orange Threadlocker Gel is ideal for modern day engine bays with a great deal of lightweight components and high vibration applications. Unlike traditional Red Threadlocker, Orange Threadlocker can be removed with hand tools when extra force is applied.
Permatex 25224 The Right Stuff Gasket Maker, 7 Oz. - 25224 - 180-25224F1
Return equipment to service immediately when you make leak-proof gaskets in just one minute with the Right Stuff.® This latest elastomeric rubber gasket technology is blowout resistant and outperforms pre-cut gaskets. Resists ATF, coolant, oil and other shop fluids. Protects against leaks caused by vibration and thermal expansion. Sensor-safe.
Permatex 27005 High Strength Threadlocker Red Gel, 5 Gr., Red - 27005 - 180-27005F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Permatex 27835 High Strength Threadlocker Red Gel, 35 Gr., Red - 27835 - 180-27835F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Permatex 51813 50 Ml. 518 Gasket Maker - 51813 - 180-51813F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 51817 6 Ml. 518 Gasket Maker - 51817 - 180-51817F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 54540 Pneumatic / Hydraulic Sealant, 36 Ml. - 54540 - 180-54540F1
Designed for locking and sealing high pressure hydraulic and pneumatic systems, Pneumatic/Hydraulic Sealant contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on "as received" fasteners and controlled locking strength affords easy disassembly. Suggested Applications: Hydraulic line fittings, brake fittings, transmission fluid fittings, PTO fittings.
Permatex 56521 High Performance Thread Sealant, 50 Ml. - 56521 - 180-56521F1
Industrial grade, specifically designed for metal and tapered pipe thread fittings. Replaces thread sealant tape or pipe dopes. Cures rapidly to prevent galling and protect mated thread areas from rust and corrosion.
Permatex 57535 Seal & Lock Thread Compound, 1.18 Fl. Oz. - 57535 - 180-57535F1
Permatex™ Seal + Lock Thread Compound combines the power of a thread sealant and a threadlocker into one. Current products on the market can only seal or lock, but Permatex has created a product that does both. With this hybrid thread compound, sealed connections will not loosen and locked fittings will not leak.
Permatex 80007 Form-A-Gasket No. 1, 1.5 Oz. - 80007 - 180-80007F1
No. 1 sealant is fast drying and hard-setting for sealing rigid materials, flanges and patching holes and joints. Resists common shop fluids and fuels. Temperature range -65° F to 400° F.
Permatex 80008 Form-A-Gasket No. 1, 3 Oz. - 80008 - 180-80008F1
No. 1 sealant is fast drying and hard-setting for sealing rigid materials, flanges and patching holes and joints. Resists common shop fluids and fuels. Temperature range -65° F to 400° F.
Permatex 80015 1.5 Oz Form-A-Gasket #2 - 80015 - 180-80015F1
Slow-drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels. Use where sealing is more important than adhesion
