Select Category
Brands
Rock Tamers 00108 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 2" Receiver - 108 - 629-00108F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceHeavy duty 24" x 24" rubber mudflaps molded with a layer of tear resistant fabric, can be cut to lengthSupport rods are stainless sleeved steel rodsStrong corrosion resistant forged aluminum center hub and armsEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rock Tamers 00110 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 2-1/2" Receiver - 110 - 629-00110F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceHeavy duty 24" x 24" rubber mudflaps molded with a layer of tear resistant fabric, can be cut to lengthSupport rods are stainless sleeved steel rodsStrong corrosion resistant forged aluminum center hub and armsEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rock Tamers 00112 Matte Black Adjustable 24" X 24" Rubber Mudflap System & Stainless Steel Trim Plates For 3" Receiver - 112 - 629-00112F1
Rock Tamers™ are the premier "Adjustable and Removable" Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris. Adjustable width & ground clearanceEasily secures to drawbar (Purchased separately)Center hub requires min. 1" clearance
Rock Tamers™ Rt240 Led Light Bar System - Rt240 - 629-Rt240F1
An add-on mudflap accessory that gives your towing vehicle an additional set of tail, stop and turn signal lights.The perfect solution for consumers who want to make sure their vehicle is seen while towing. Rock Tamers Tail Light Bars give you two (2) strips of brilliant LED light - each bar measures 24 inches by 1 inch wide and have 24 LEDs.Simple design works with existing Rock Tamers Mudflaps hardware and can be used on other mudflap systems as well. Extruded "C" channel aluminum housing slides over the heads of the flap clamp bolts and tightly secures in place. See back of package for specific details.Easy to connect 4 wire flat trailer connector plugs into standard trailer connections. The specially designed plug is angled so both the 4 wire flat and 7 blade can be plugged in and used at the same time.The light bar wiring harness has two (2) coiled leads each with water-tight end plugs for secure and trouble free connections. Use the included cable ties to keep the harness neatly mounted.P/N RT240 comes complete with black powder coated left and right tail light bars, coiled wiring harness with 4 wire flat connector and ten (12) stainless cable ties (4.6mm x 150mm). Complete installation instruction and pictures included
Rock Tamers™ Rt410 Wall Hanger - Rt410 - 629-Rt410F1
Includes 2 cushioned wall mounted arms to hold the system and 1 kick plate (double-sided tape backed) for resting the hitchSimple 2 piece design screws together with the included screws to give you a professional, functional and finished lookMounts to standard 16 inch on center wall studs using the four (4) included 1/4 inch x 1.5 inch stainless lag boltsMax holding weight capacity of 70 lbs. Designed to support the Rock Tamers System while still mounted to the draw bar (hitch) if desiredWall storage reduces mudflap curling by allowing the flaps to rest in their natural straight up and down positionWall storage reduces curling by allowing the flaps to hang naturally
Rocker Cover Gasket - 827154 - 710-27-827154F1
Rocker Cover Gasket @2 Mcm 3.7L 1976-89 - 73666 - 710-27-73666F1
Rocker Cover Gasket Gm V-8 283/305/327/350 - 11999 - 710-27-11999F1
Rocker Cover Gasket Mcm - 814703 - 710-27-814703F1
Rocker Cover Gasket Mcm Ss<27-806452 - 851040 - 710-27-851040F1
Rocker Cover Gasket Ss<27-811588 - 8M0092920 - 710-27-8M0092920F1
Rocker Switch - Illuminating - 420446-1 - 354-4204461F1
Rocker Switch is constructed of durable, weather resistant injection molded nylon and polycarbonate housing. Snap-in panel mount fits 1/2" x 1-1/8" switch cut-out. Wires easily with three stamped brass 1/4" blade terminals. Illuminates red when in the on position. 15A @ 12VDC.
Rocker Switch - On/Off - 420441-1 - 354-4204411F1
Rocker Switch is constructed of durable, weather resistant injection molded nylon and polycarbonate housing. Snap-in panel mount fits 1/2" x 1-1/8" switch cut-out. Wires easily with three stamped brass 1/4" blade terminals. Illuminates red when in the ON position. 15A @ 12VDC.
Rocker Switch - On/Off/On - Rk40170 - 11-Rk40170F1
Non corrosive plastic construction. Black face plate. Non-illuminated. Silver contacts and brass blade terminals. Rated: 20 amps @ 12 VDC. ON in parenthesis (On) indicates a momentary position.
Rocker Switch - Rk21880 - 11-Rk21880F1
Solid Black plastic construction. 1/4" male blade terminals. Switch snap fits into 7/16" x 1-1/4" rectangular hole. For use in panel RK22070. 20 amps at 12 VDC.
Rocker Switch 2-Position - Rk40140 - 11-Rk40140F1
Non corrosive plastic construction. Black face plate. Non-illuminated. Silver contacts and brass blade terminals. Rated: 20 amps @ 12 VDC. ON in parenthesis (On) indicates a momentary position.
Rocker Switch Mounting Bracket End Section - Un19740 - 11-Un19740F1
Fits Sierra Standard and Contura® rocker switches. Sections snap together without using tools. For a complete kit, order part UN19750; kit includes 2 End Sections (UN19740), 1 Middle Section (UN19710), 1 Blank Cover (UN19700).
Rocker Switch Mounting Bracket Kit - Un19750 - 11-Un19750F1
Fits Sierra Standard and Contura® rocker switches. Sections snap together without using tools. Complete kit includes 2 End Sections (UN19740), 1 Middle Section (UN19710), 1 Blank Cover (UN19700).
Rocker Switch Mounting Bracket Middle Section For 1 Switch - Un19710 - 11-Un19710F1
Fits Sierra Standard and Contura® rocker switches. Sections snap together without using tools. For a complete kit, order part UN19750; kit includes 2 End Sections (UN19740), 1 Middle Section (UN19710), 1 Blank Cover (UN19700).
Rocker Switch Mounting Bracket Middle Section For 2 Switches - Un19730 - 11-Un19730F1
Fits Sierra Standard and Contura® rocker switches. Sections snap together without using tools. For a complete kit, order part UN19750; kit includes 2 End Sections (UN19740), 1 Middle Section (UN19710), 1 Blank Cover (UN19700).
Rocker Switch Mounting Bracket Mounting Kit Disc - 87167-01-Bp - 12-8716701Bpf1
Rocker Switch On (Red)/Off - 590-3021 - 590-3021F1
Snap mount thermo-plastic housing 12V - 15AFits panels up to 1/4 thickOverall size: 1-3/4" x 1-5/16"Cut-out size: 1" x 3/4". With plug-in type terminals
Rocker Switch On (Red)/Off/On (Red) - 3023 - 590-3023F1
Snap mount thermo-plastic housing 12V - 15AFits panels up to 1/4 thickOverall size: 1-3/4" x 1-5/16"Cut-out size: 1" x 3/4". With plug-in type terminals
Rocker Switch Red Soft Spot - Rk40390 - 11-Rk40390F1
Non-corrosive plastic constuction, silver contacts, brass blade terminals. Rated 20 amps @ 12VDC. Fits a cutout of .830" x 1.45". Fits panel up to .187" thick. ON in parenthesis (On) indicates a momentary postion. Independent pilot light - Illuminates when panel lights on Illuminates White when panel lights are ON, changes to Red when switch is in on Soft spotlight helps preserve night vision
