Select Category
Brands
Sea-Dog Illuminated Toggle Switch, On/Off - 420111-1 - 354-4201111F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminated Toggle Switch, On/Off/On - 420118-1 - 354-4201181F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Kill Switch 10 Key Universal Lanyard - 420496-1 - 354-4204961F1
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50" lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
Sea-Dog Kill Switch 7 Key Universal Lanyard - 420495-1 - 354-4204951F1
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50" lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
Sea-Dog Led Flush Mount Courtesy Light, Oval, Blue Leds - 401279-1 - 354-4012791F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Led Flush Mount Courtesy Light, Round, Blue Leds - 401274-1 - 354-4012741F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Line 2270301 Elbow Catch, Black, A:,1-1/8" B:1-5/16", #6 Fh - 227030-1 - 354-2270301F1
Ideal for holding inactive doors shut. Constructed of UV resistant injection molded nylon. Surface mounts with four #6 FH fasteners (not included).
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4267101 Screw Terminal Buss Bar, 5 Terminals - 426710-1 - 354-4267101F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 4267111 Screw Terminal Buss Bar, 10 Terminals - 426711-1 - 354-4267111F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
Sea-Dog Op40002 Dome Light Replacement Switch - 0P40002 - 354-Op40002F1
Sea-Dog Outboard Motor Safety Cable - 371599-1 - 354-3715991F1
Vinyl coated galvanized steel wire.Comes complete with Sea Dog #156060 snap hook.
Sea-Dog Utility Cordage, 1/8" X 50' - 303303050Wh-1 - 354-303303050Wh1F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 3/16" X 50' - 303305050-1 - 354-3033050501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 5/32" X 50' - 303304050-1 - 354-3033040501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 1/2" - 181112 - 354-181112F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 3/8" - 181110 - 354-181110F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Galvanized Eye & Eye Swivel, 5/8" - 181116 - 354-181116F1
Swivels link together two parts that have separate rotational directions reducing knotting or twisting and relieving stress. Constructed of hot dipped galvanized stamped steel, these eye to eye swivels are ideal for anchor and mooring lines. Large eyes accommodate shackles for chain connections or eye splices with thimbles for anchor rodes.
Sea-Dog Xxx Ss Midget Vent, 1-5/8" - 331360-1 - 354-3313601F1
Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Dog Xxx Ss Midget Vent, 2-1/4" - 331370-1 - 354-3313701F1
Stainless steel midget clam shell vents Stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Three pre-drilled holes for a smooth screw on installation. #6 RH fasteners not included.
Sea-Flange Valve 1 - 78-118-01 - 37-7811801F1
Full-flow, 85-5-5-5 bronze ball valves are designed to replace the old style sea cocks. Stainless steel handle and stem nut, chrome plated bronze ball, glass reinforced TFE seats and seals and body drain plug. U.L. listed. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS.
