Brands

Alexseal Yacht Coating (Canada Only)

Ambassador Marine (Canada Only)

Associated Trucker'S Supply (Canada Only)

C.S. Osborne & Co (Canada Only)

Coast Fiber-Tek Products (Canada Only)

Comnav Marine Ltd (Canada Only)

Danik Indust (Swagman Bike Carriers)

Dickinson Marine Ltd (Canada Only)

Dual Electronics Corp (Canada Only)

Enterprise Paper (Canada Only)

Fairview Fittings & Mfg (Canada Only)

Global Vision Eyewear (Canada Only)

Gordon Crane & Hoist (Canada Only)

Green Line Hose & Fitting (Canada Only)

Hypervent Marine (Canada Only)

J. Ennis Fabrics Ltd. (Canada Only)

Keystone Supplies Co (Canada Only)

Kobelt Manufacturing Co (Canada Only)

Lasalle Bristol (Bristol Prods)

Marine Business S.A. (Canada Only)

Marine Hardware Inc (Canada Only)

Muncy Industries (Canada Only)

Oceanair Technologies (Canada Only)

Owatrol Coatings (Canada Only)

Pacific Fasteners (Canada Only)

Power Max - Fieldstone Products

Precision Fitting & Fastener (Canada Only)

Protocol Environmental Solutions (Canada Only)

Rainier Precision (Canada Only)

Rv Products-Airxcel, Inc.(Maxx Air Vent)

Salt-Away Products (Canada Only)

Schmitt Marine Steering Wheels

Tech-Edge Manufacturing (Canada Only)

The Gorilla Glue Company (Canada Only)

Tri-Peek Canada Limited (Canada Only)

Weaver Industries (Canada Only)

Sea-Lect Designs Webbing Handle W/End Caps - K736462-9 - 680-K7364629F1

Sea-Lect Design, Hinges, Latches & Locks

$12.29

A quality upgrade part for webbing strap handles that have one screw hole each side. A Sea-Lect, aka Sea Dog product. Replace older strap handles, such as those common on Eddyline, early model Old Town kayaks and many other brands such as the Bic Kayaks Handle. The cap is molded for a 10-32 screw. Cap optional but will serve the purpose of a washer. Use without caps for 1/4-20 screws. Make getting your boat easier to get to the water by installing a webbing handle (works for both side, and bow/stern applications)Replace a worn out webbing handle, or add a new one to any boatKit Includes: One (1) Webbing Handle, Two (2) End Caps, Two (2) #10-32 X 1" PH, Two (2) #10-32 Nyloc Nuts and Two (2) #10 Fender WashersA: 11-1/2" / B: 10" / C: 5" / D: 1" / Fastener: #10 PHEasy installation instructions and video

Sea-Lect K4269251 Sae Power Cable Inline Fuse Holder, A: 12", 12-24V, 20A @ 12V, 12 Ga. Awm - K426925-1 - 680-K4269251F1

Sea-Lect Design, Power Distribution

$12.59

2-Wire Polarized Electrical Connector is an SAE type, two-prong plug and socket connector set. Polarized to assure the proper mating of circuits, reducing the chance of accidental reverse polarity. Color coded 16-gauge lead wire with bullet-type contact pins. Weather resistant connectors are vibration and strain resistant. Constructed of injection molded PVC. 20A. 12-24VDC 2-Wire Polarized Electrical Connector is an SAE type, two-prong plug and socket connector setPolarized to assure the proper mating of circuits, reducing the chance of accidental reverse polarityColor coded 16-gauge lead wire with bullet-type contact pinsWeather resistant connectors are vibration and strain resistantConstructed of injection molded PVC. 20A. 12-24VDC

Sea-Lect K7373619 Performance Paddle Clip Kit ,Included: Sea-Lect Paddle Clip (1) 10-32 X 1" Ph (2) 10-32 Nyloc Nut (2) #10 Flat Washer (2) #10 Well Nut (2) - K737361-9 - 680-K7373619F1

Sea-Lect Design, Fasteners & Hardware

$16.79

This one-piece paddle clip allows for the simple one-handed storage of your paddle; features anti snag ramps to prevent the line from getting stuck under the clip when not in use, and leash attachment points for securing a paddle leash. This one-piece paddle clip allows for the simple one-handed storage of your paddleFeatures anti snag ramps to prevent the line from getting stuck under the clip when not in use, and leash attachment points for securing a paddle leash.Kit includes Sea-Lect Designs Paddle Clip (1) 10-32 X 1" PH (2) 10-32 Nyloc Nut (2) #10 Flat Washer (2) #10 Well Nut (2)A: 1-1/8" / B: 4"" / Fastener: 1/4" Oval HeadPaddle Clip made in the USA (Everett, WA)

Sea-Lect K7452701 Kayak Hatch Covers - Vcp Oval, Performance Style, Lid Only, A:17-1/4" B: 2" C:10" - K745270-1 - 680-K7452701F1

Sea-Lect Design, Canvas & Covers

$106.29

Great as a replacement for lost or damaged lids, or as a new addition to your boat, Are manufactured .Performance Hatches feature our unique two-part construction for maximum protection, while our Recreational Hatches offer a UV resistant all-rubber option at a more economical price. Both designs float when dropped in the water, and are easy to attach while still offering a superior watertight seal. Our VCP Oval hatch is compatible with the Valley Canoe Products (VCP) oval hatch when mounted on an injection molded rim bolted/glued to the deck; not recommended for rotomolded kayaks that do not feature this rim. Performance Hatches feature our unique two-part construction for maximum protection, while our Recreational Hatches offer a UV resistant all-rubber option at a more economical priceBoth designs float when dropped in the water, and are easy to attach while still offering a superior watertight sealVCP Oval hatch is compatible with the Valley Canoe Products (VCP) oval hatch when mounted on an injection molded rim bolted/glued to the deck; not recommended for rotomolded kayaks that do not feature this rimTo size your replacement lid carefully measure lip of the hatch rim from the outer edge of lip to outer edge of lip. Length: 17-13/16" / Width: 10" / Weight: 1.3lbThis Hatch Cover is proudly made in the USA! (Everett, WA)

Sea-Lect K747100B1 Kayak Adjustable Footbrace, Standard Flag, A:20-1/4", B:4-1/4", C:14-1/2", Black - K747100B-1 - 680-K747100B1F1

Sea-Lect Design, Rails, Ladders & Seating

$61.59

10" of adjustable travel with only the flip of the lever. The two mounting holes (measuring 14-1/2" apart) fit most existing footbrace patterns, and the entire unit is designed to be maintenance free and self-cleaning while maintaining tremendous strength. In addition, Pedals are extremely comfortable. Thru-hole mounting for easy user installation. 10" of adjustable travel with only the flip of the leverThe two mounting holes (measuring 14-1/2" apart) fit most existing footbrace patterns, and the entire unit is designed to be maintenance free and self-cleaning while maintaining tremendous strengthThru-hole mounting for easy user installation.

Sea-Lect K7472701 Stud Mount & Stud Mount Kit, Kit Style, 1/4"-20, A: 1-7/8" B: 1-1/4" - K747270-1 - 680-K7472701F1

Sea-Lect Design, Miscellaneous

$41.39

When you don't want to mount your footbraces by drilling a hole through your kayak, simply fiberglass or glue on studs to act as the mounting bracket. This kit includes parts that work with both standard and rudder control footbraces. Display Sets Include: Four (4) Studs, Four (4) Clamps, Four (4) Nyloc Nuts, and Two (2) Cable Adjuster Clamps. This kit includes parts that work with both standard and rudder control footbraces.Display Sets Include: Four (4) Studs, Four (4) Clamps, Four (4) Nyloc Nuts, and Two (2) Cable Adjuster Clamps.

Sea-Lect K7482801 Trucourse™ Rudder Gudgeon, A:2-3/4" , B:15-16", C:1-5/16:, D:11/16" - K748280-1 - 680-K7482801F1

Sea-Lect Design, Miscellaneous

$18.99

Required to mount our Trucourse™ Rudder to kayaks with a flat stern. Fits Jackson Kayaks rudder ready hulls. Required to mount our Trucourse™ Rudder to kayaks with a flat sternFits Jackson Kayaks rudder ready hulls.A: 2-3/4" / B: 15/16" / C: 1-5/16" / D: 11/16"