Select Category
Brands
Water Pump, Ik 22307636 Replaces 22307636 Replaces 21213664 - Wp016 - 57-Wp016F1
Water Puppy Pump, 12V - 18660-0121 - 6-186600121F1
This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 4' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. If the water contains a significant amount of oil use oil resistant nitrile impeller #6303-0003. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Water Resistant Fuse Holder W/Spare Fuse Compartment - Fs69150 - 11-Fs69150F1
10 GA 8" wire loop w/ two 30 Amp fuses
Water Resistant Quiet Blower - 1749-4 - 23-17494F1
The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed.
Water Seal Damper Yamaha 682-44365-00 - 18-1834 - 47-1834F1
Water Seal Damper Yamaha 682-44366-00 - 18-1831 - 47-1831F1
Water Seal Damper Yamaha 682-44367-00 - 18-1832 - 47-1832F1
Water Seal Kit - 25115-Shw - 762-25115F1
Upgrade older pumps by utilizing the shaft bearing assemblies and the 25115 seal kit. The seal kit includes a seal pusher that sets the proper height of the seal seat on the shaft. The shaft/bearing assemblies do NOT have a retaining ring groove on the shaft in the area between the impeller and the first bearing (the bearing on the impeller end of the pump). If a retaining ring exists between the impeller and the first bearing, do not use the 25115 mechanical seal kit.For further information or specific applications please contact customer service.
Water Sep Fuel Filter Mercury Replaces Mercury 8M0157616 - 18-79968 - 47-79968F1
Water Separating Diesel Fuel Filter - 807256T - 710-35-807256Tf1
Water Separating Fuel Filter Kit - 8M0082290 - 710-35-8M0082290F1
Kit consists of a vessel mounted head (without fittings) and a high capacitywater separating fuel filter. The brass fittings may be used with gas engines butstainless steel fittings (obtain locally) are required in diesel applications. Filterfeatures 10 micron, 90% efficiency with a 120 gallon per hour flow rate.Compatible with most 2-Stroke and 4-Stroke outboards and most inboard & sterndrive gas and diesel engines.
Water Spot Remover, 22 Oz. - 092022P - 74-92022F1
Instantly removes stubborn water spots from fiberglass, metal and painted surfaces. Non-abrasive and non-toxic. Simple spray on, wipe off formula
Water Tank 90 Degree Adaptor Kit - 93-2223 - 100-932223F1
Enables the boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Includes all the fittings needed to attach hoses to a water or holding tank. Includes: 1/2" 90° hose barbs(2), 1-1/2" 90° hose barb(1) and thread sealant tape.
Water Tank Straight Adapter Kit - 93-2222 - 100-932222F1
Enables the boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Includes all the fittings needed to attach hoses to a water or holding tank. Includes: 1/2" hose barbs(2), 1-1/2" hose barb(1) and thread sealant tape.
Water Temp Switch-Audio Warn System - 48952 - 710-48952F1
Water Temperatue Sender - 90402 - 678-90402F1
1/4" American single standard
Water Temperature Sender - 90403 - 678-90403F1
3/8" American single standard
Water Temperature Sender - F90406 - 678-90406F1
American Dual Standard 1/8"
