Select Category
Brands
Attwood Pulsar Side Light Deck Mount Port - Red - 5040R7 - 23-5040R7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Side Light Deck Mount Starboard - Green - 5040G7 - 23-5040G7F1
For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.Size: 2-3/8" diameter x 1-7/16" vertical height.
Attwood Pulsar Side Light, Raised Base, Green Lens - 5080G7 - 23-5080G7F1
Pulsar Sidelight w/Raised Base, Green
Attwood Pulsar Side Light, Raised Base, Red Lens - 5080R7 - 23-5080R7F1
Pulsar Sidelight w/Raised Base, Red
Attwood Push/Pull Switch Three-Position - 2079752 - 23-75943F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Push/Pull Switch Two-Position - 2068521 - 23-75636F1
Quality metal with chrome plating and pebble finish pull. Fits 3/8" dia. hole.
Attwood Quick Disconnect Seat Mount 6-1/4" Swivel - 11602D1 - 23-11602D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Quick Disconnect Seat Mount 7" Swivel - 11603D1 - 23-11603D1F1
Fast and easy installation and removal of seat. Mounts on any flat 8" x 9" surface.
Attwood Rectangular Flush Hatch Pull - 46569 - 23-20277F1
The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish.
Attwood Replacement 360 Degree Globe For Series 6700 - 1762052 - 23-6724051F1
Replacement 360° Globe For Series 6700
Attwood Replacement Anti-Glare Lens For 3900 Series - 912021-7 - 23-9120217F1
Replacement Anti-Glare Lens For 3900 Series
Attwood Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340 - 912852-7 - 23-9128527F1
Replacement Anti-Glare Lens For Series 5300, 5310, 5320, 5330, 5340
Attwood Replacement Cover For 1670 Fuel Tank Vent - 911526-1 - 23-9115261F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
Attwood Rod Holder Combo Mount Black - 1136452 - 23-50117F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50227: Flush mount, mounts to gunwale or deck. Easy-open cover conceals fasteners and elastomeric liner seals water out. When closed, the low-profile, contoured design avoids snagging.50117/5011W7: Combo side/surface mount can be used on a vertical or horizontal surface or used with the 50127 rail adapter.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Holder Flush Mount Black - 1140470 - 23-50227F1
Flush mount, interchangeable mounting base fits 2-in 1, Pro Series, and Mini Rigger fishing systems. Mounts to gunwale or deck. Easy-open cover conceals
Attwood Rod Holder Flush Mount Stainless Steel 0 Degree White Open End - 66364W7 - 23-66364W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree Black Open End - 66363-7 - 23-663637F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 15 Degree White Open End - 66363W7 - 23-66363W7F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Flush Mount Stainless Steel 30 Degree Black Closed End - 66470-7 - 23-664707F1
Attwood stainless steel rod holders are available in 30°, 15°, and 0° configurations. Features a U.V-resistant polymer liner that protects the finish on rod and reel and a U.V-resistant cover cap/gasket that closes the tube when not in use. Oval flangeOpen-end series for most open water applicationsAll closed series rod holders include drainage opening for 14-18 NPT fitting for installation in enclosed gunwales
Attwood Rod Holder Rail Mount For 3/4 To 1-1/4" Rails, Black - 1136818 - 23-50127F1
Interchangeable mounting bases fit 2-in 1, Pro Series, and Mini Rigger fishing systems.50127: Rail mount for use with rails from 3/4" to 1-1/4" in width. For use with 5011 side/surface mounts.
Attwood Rod Storage Holder - 12750-6 - 23-127506F1
Holds up to 3 fishing rods. Closed cell foam insert protects rod. Mount vertical or horizontal. 8-3/4"L x 2-1/2" W.
Attwood Rubber Bow Roller, 3" - 11205-1 - 23-112051F1
Durable protective molded rubber bow rollers Non-marring prime rubber compound
Attwood Scupper Valve - 721781 - 23-38763F1
Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as a replacement valve for 3881 thru-transom scupper.Caution: Thru-hull connectors are designed for installation above the water line only.
Attwood Shock Absorbing Transom Saver Roller/Trailer Mount 27 To 36" - Sp-421-Rb - 148-Sp421Rbf1
Shock-Eze, a spring-loaded transom saver, is designed to reduce damaging effects of road shock. Works great for motors with hydraulic trim/tiltDeluxe head with composite heads Black coated tubeBolt or roller mounting bracketSupports weight of the motor
Attwood Shock Absorbing Transom Saver Roller/Trailer Mount 31 To 40" - Sp-429-Rb - 148-Sp429Rbf1
Shock-Eze, a spring-loaded transom saver, is designed to reduce damaging effects of road shock. Works great for motors with hydraulic trim/tiltDeluxe head with composite heads. Black coated tubeBolt or roller mounting bracketSupports weight of the motor
