Jabsco
Jabsco 22610-9407 Self Priming Wakeboard & Ski Boat 15 Gpm Ballast Pump With Deutsch Connector - 22610-9427 - 6-226109427F1
This self-priming pump can deliver almost 80lbs of water per minute and is reversible to both fill and empty ballast tanks. Run-dry protection shuts off pump before impeller is damaged. Complies with USCG 183.410 and ISO 8846 for ignition protection. Ports: 1/2" NPT internal thread and 1" external hose barb. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Jabsco 189161050 Pressure Switch For 31395 Series - 18916-1050 - 6-189161050F1
Pressure Switch for 31395 Series
Jabsco 189161025 Pressure Switch For 31295 & 31395 Series - 18916-1025 - 6-189161025F1
Pressure Switch for 31295 & 31395 Series
Jabsco 187530554 12V Motor For Select Quiet Flush Series Toilets - 18753-0554 - 6-187530554F1
Motor
Jabsco 18670-9407 Self Priming Wakeboard & Ski Boat 8.4 Gpm Ballast Pump W/O Reversing Switch W/Mastercraft Oem Connector - 18670-9407 - 6-186709407F1
Utilizing our reversible flexible impeller pump technology, ballast systems can be filled or emptied. Available with or without Reversing Polarity Switch to fill or empty ballast tanks. Includes run-dry impeller. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). 1" (25mm) hose barb or 1/2" NPT internal port.Includes Mastercraft OEM Connector, No Reversing Switch.NOT TO BE USED IN POTABLE WATER SYSTEMS.
Jabsco 18670-0943 24V Commercial Duty Self Priming 9 Gpm Water Puppy Flexible Nitrile Impeller Pump - 18670-0943 - 6-186700943F1
This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 6' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and has adequate torque to reverse the pump. Complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Jabsco 18660-0123 12V Self Priming 6.3 Gpm Water Puppy Flexible Nitrile Impeller Pump - 18660-0123 - 6-186600123F1
This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 4' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. If the water contains a significant amount of oil use oil resistant nitrile impeller #6303-0003. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter.
Jabsco 18590-2094 24V Self Priming 12 Gpm Macerator Pump - 18590-2094 - 6-185902094F1
Self priming pump with run dry protection Triple sealed motor to prevent both internal & external motor corrosion.Four-bladed chopper reduces clogging.Flow rate to 12 gpmSelf-priming to 4' vertical lift.Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).Size: 11-3/8" L x 4-3/4" W x 3-5/8"H.Fitting: Inlet Port: 1-1/2" Hose Barb plus 1-1/2" NPT. Discharge Port: 1" Hose Barb.
Jabsco 18590-2092 12V Self Priming 12 Gpm Macerator Pump - 18590-2092 - 6-185902092F1
Self priming pump with run dry protection Triple sealed motor to prevent both internal & external motor corrosion.Four-bladed chopper reduces clogging.Flow rate to 12 gpmSelf-priming to 4' vertical lift.Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).Size: 11-3/8" L x 4-3/4" W x 3-5/8"H.Fitting: Inlet Port: 1-1/2" Hose Barb plus 1-1/2" NPT. Discharge Port: 1" Hose Barb.
Jabsco 18220-1127 Self Priming Wakeboard & Ski Boat 9 Gpm Ballast Pump With Reversing Switch - 18220-1127 - 6-182201127F1
This self-priming pump can deliver almost 80lbs of water per minute and is reversible to both fill and empty ballast tanks. Run-dry protection shuts off pump before impeller is damaged. Complies with USCG 183.410 and ISO 8846 for ignition protection. Ports: 1/2" NPT internal thread and 1" external hose barb. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Jabsco 18220-1127 Self Priming Wakeboard & Ski Boat 9 Gpm Ballast Pump W/O Reversing Switch - 18670-9127 - 6-186709127F1
Utilizing our reversible flexible impeller pump technology, ballast systems can be filled or emptied. Available with or without Reversing Polarity Switch to fill or empty ballast tanks. Includes run-dry impeller. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). 1" (25mm) hose barb or 1/2" NPT internal port.Includes Deutsch Connector, No Reversing Switch.NOT TO BE USED IN POTABLE WATER SYSTEMS.
Jabsco 18080-0000 Permanent Oil Drain Hose & Fitting - 18080-0000 - 6-180800000F1
Includes 1/2"-20 drain plug fitting, oil drain hose, cap and hose hanger clamp. Not recommended for cars with drain plugs exposed to potential road hazard damage. Once installed, future oil changes can be done either by gravity or with the use of one of the Jabsco oil changers.
Jabsco 17860-2012 12V Flat Tank 14 Quart Oil Changer - 17860-2012 - 6-178602012F1
This 14 quart (13 liter) compact self-contained unit has a self-priming diaphragm pump with an easy pour spout for emptying. The unit comes with a dipstick suction tube, battery clamp leads and on/off switch to make the pumping process simpler and easier.
Jabsco 178300024 Oil Change Pump, 24V - 17830-0024 - 6-178300024F1
This same high quality pump used in the Jabsco multi-engine oil change system can change oil in a typical V-8 engine in just minutes. Reversible pump drains and refills engine oilConnections for 3/8" NPT male threaded fitting
Jabsco 17820-0012 12V Oil Changer System - 17820-0012 - 6-178200012F1
Consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves. This system includes a pump reversing switch to pump used oil out and new oil in, the cover includes a hinged valve cover to protect them from being accidentally opened, and the valve cover will not close after an oil change unless valves are securely closed. Complies with USCG 183.410 and ISO 8846 Marine (ignition protected). 1/2" NPT Ball valves. 12 Volt DC.
Jabsco 17800-2000 12V Heavy Duty 14 Quart "Porta Quick" Oil Changer - 17800-2000 - 6-178002000F1
Makes quick, clean and easy oil changes on-board. 14 quart container. Hose - 1/2" ID x 48" long. Probe - 1/4" OD x 40" long. Size: 15-3/8" H x 13-1/2" Diameter. 12 VDC, fuse 15 amp.
Jabsco 177951000 Hose Kit For #178001000 - 17795-1000 - 6-177951000F1
Makes quick, clean and easy oil changes on-board any boat. 14 quart container. Hose - 1/2" ID x 48" long. Probe - 1/4" OD x 40" long. Size: 15-3/8" H x 13-1/2" Diameter. 12 volt dc, fuse 15 amp.
Jabsco 172881000 Bolt Kits, Macerator Pump - 17288-1000 - 6-172881000F1
Bolt Kit for Macerator Pump With Run-Dry Protection (18590-Series)
Jabsco 17250-0003 Self-Priming Drill Pump - 17250-0003 - 6-172500003F1
Provides a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. Pumps up to 3-1/2 gpm, self-priming to 3', 1/4" diameter shaft, supplied with 3/4" garden hose thread port adapters, connections for 1/2" ID hose and 3/4" GHT female threaded fittings. Size: 3-5/16" L x 3-1/2" W x 2-3/16" H.
Jabsco 17215-0000 Self-Priming Drill Pump Kit & Hoses - 17215-0000 - 6-172150000F1
Provides a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. Pumps up to 3-1/2 gpm, self-priming to 3', 1/4" diameter shaft, supplied with 3/4" garden hose thread port adapters, connections for 1/2" ID hose and 3/4" GHT female threaded fittings. Size: 3-5/16" L x 3-1/2" W x 2-3/16" H. Includes drain hose and suction tube.
Jabsco 1673-1001 Self Priming Pulley Driven Engine Cooling Pump With 8.9@1500Rpm Gpm & Neoprene Impeller - 1673-1001 - 6-16731001F1
Self priming flexible impeller pump. Ideal for engine cooling, washdown, circulation and other general purposes. Corrosion resistant bronze bodies and stainless shafts are well suited for marine environments. Permanently lubricated ball bearings.
Jabsco 11860-0005 12V 1" Pump Clutch - 11860-0005 - 6-118600005F1
This electrically activated clutch pump features a bronze body with a brass insert & cam and offers all the benefits of flexible impeller pumps with substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. Equipped with mechanical clutch engagement screws in case of electrical failure. Good for pumping bilges, washdowns, circulating water in bait tanks, or as a utility dock-side pump. Stainless shaft, carbon-ceramic mechanical seal, twin row ball bearings. 2-A belt. Do not run dry. GPM figures are based on running at 1750 RPM.
Jabsco 10400000 Replacement Seal - 1040-0000 - 6-10400000F1
Replacement Seal
In-Line Strainer, 1/2" Hose - 36400-0000 - 6-364000000F1
Prevents dirt and other particles from entering pump intake. Cuts down on repairs. Transparent housing for quick inspection, 50 mesh stainless steel filtering screen.
