Mercury/Quicksilver
Quicksilver 8M0164161 Exhaust Manifold & Elbow Kit - 8M0164161 - 710-8M0164161F1
This kit contains all the parts necessary to replace the dry joint 14° exhaust on a MCM small block V8 engine with standard cooling and no risers. Note: Engines with freshwater cooling &/or risers may require additional exhaust elbow gaskets to be ordered separately. Fits the following GM small block (305, 350 & 377 CID) engines with dry joint 14° exhaust elbows. 2004 & newer MCM sterndrives (non?EC) engines (s/n 0W310000 and above) 2002 & newer MIE inboards (non EC) engines (s/n 0M317000 and above).
Quicksilver 8M0164160 Exhaust Manifold & Elbow Conversion Kit - 8M0164160 - 710-8M0164160F1
This kit contains all the parts necessary to convert a MCM small block V6 engine with standard cooling and no risers with the 2 pc wet joint exhaust manifold & 4" O.D. center rise 7° exhaust elbows to dry joint exhaust manifolds and elbows. Note: Engines with freshwater cooling &/or risers may require additional exhaust elbow gaskets to be ordered separately. Fits the 1987?2004 MCM V6 engines with the 2 pc wet joint or dry joint 4 in O.D. center rise 7° exhaust elbows (s/n 0W309999 and below).
Quicksilver 8M0164159 Exhaust Manifold & Elbow Conversion Kit - 8M0164159 - 710-8M0164159F1
This kit contains all the parts necessary to convert a MCM small block V8 engine with standard cooling and no risers with wet joint exhaust manifold & 4" O.D. center rise 7° exhaust elbows to dry joint exhaust manifolds and elbows.Note: Engines with freshwater cooling &/or risers may require additional exhaust elbow gaskets to be ordered separately. Fits the GM small block (305, 350 & 377 CID) engines with the wet joint or dry joint 4 in. O.D. center rise 7° exhaust elbows. 1987?2004 MCM sterndrive engines (s/n 0W309999 and below) 1987?2001 MIE inboard engines (s/n 0M316999 and below).
Quicksilver 8M0162139 Thermostat - 8M0162139 - 710-8M0162139F1
Visit www.quicksilver-products.com for up to date application information.
Quicksilver 8M0157620 Water Separating Fuel Filter - 8M0157620 - 710-8M0157620F1
Select Verado V-6 outboards Gen 5 equipped with Fuel Supply Module (FSM) systems.
Quicksilver 8M0154271 Exhaust Elbow - 8M0154271 - 710-8M0154271F1
Fits 2008 and newer MCM/MIE V-6 & V-8 (305, 350 & 377 cid) EC engines. Note: This elbow does NOT include an elbow gasket for FWC engines. The FWC elbow gasket 27-8M2004606 will need to be ordered separately.
Quicksilver 8M0154270 Exhaust Elbow - 8M0154270 - 710-8M0154270F1
Port side, Fits 2008 and newer MCM/MIE V-6 & V-8 (305, 350 & 377 cid) EC engines. Note: This elbow does NOT include an elbow gasket for FWC engines. The FWC elbow gasket 27-8M2004606 will need to be ordered separately
Quicksilver 8M0153706 6" Circulating Pump Pulley - 8M0153706 - 710-8M0153706F1
6" Diameter engine circulating pump pulley used on select 1997 & newer GM V6 & V8 engines with serpentine belt.
Quicksilver 8M0153671 Exhaust Elbow - 8M0153671 - 710-8M0153671F1
4 in. (102 mm) for Emissions Control exhaust. Fits 2008 and newer MCM/MIE/Ski V-6 (4.3L & 4.5L) & V-8 (305, 350 & 377 cid) EC engines. Also fits 4.5L V-6 & 6.2L (Mercury) non-EC engines. Note: This kit does NOT include elbow gaskets for FWC engines. The FWC elbow gaskets 27-8M2004606 will need to be ordered separately Application 4 in. (102 mm) for Emissions Control exhaust. Fits 2008 and newer MCM/MIE/Ski V-6 (4.3L & 4.5L) & V-8 (305, 350 & 377 cid) EC engines. Also fits 4.5L V-6 & 6.2L (Mercury) non-EC engines. Note: This kit does NOT include elbow gaskets 27-8M2004606 for FWC engines.
Quicksilver 8M0153486 Exhaust Elbow - 8M0153486 - 710-8M0153486F1
6 in. (152 mm) for Emissions Control exhaust. Fits 2008 and newer MCM/MIE/Ski V-6 (4.3L & 4.5L) & V-8 (305, 350 & 377 cid) EC engines. Also fits 4.5L V-6 & 6.2L (Mercury) non-EC engines.Not: This kit does NOT include elbow gaskets for FWC engines. The FWC elbow gaskets 27-8M2004606 will need to be ordered separately Application 6 in. (152 mm) for Emissions Control exhaust. Fits 2008 and newer MCM/MIE/Ski V-6 (4.3L & 4.5L) & V-8 (305, 350 & 377 cid) EC engines. Also fits 4.5L V-6 & 6.2L (Mercury) non-EC engines. Not: This kit does NOT include elbow gaskets 27-8M2004606 for FWC engines.
Quicksilver 8M0151208 Multi Engine Harness Kit For Mob+™ - 8M6007096 - 710-8M6007096F1
Diode style harness kit designed to be used with the MOB+ xHUB for multiple outboard installations. Typically, this accessory is only needed for Yamaha or Honda powered multiple engine boats but can be used in other situations. Kit is suitable for up to triple engine configured boats.
Quicksilver 8M0151207 Xtag™ Wearable Neck Accessory For Mob+™ - 8M6007095 - 710-8M6007095F1
The xTAG enables you to wear the xFOB around your neck, on your belt or on your life vest. The neck lanyard floats and includes a universal clip for PFD or belt use.
Quicksilver 8M0151204 Xband™ Wearable Wristband For Mob+™, Blue - 8M6007092 - 710-8M6007092F1
Enables you to wear the xFOB on your wrist. Highly durable and comfortable marine silicon wristband, universal fit. The xFOB™ has more than 300 hours of battery life, and is powered by an easy to change standard coin cell battery.
Quicksilver 8M0151203 Xband™ Wearable Wristband For Mob+™, Black - 8M6007091 - 710-8M6007091F1
Enables you to wear the xFOB on your wrist. Highly durable and comfortable marine silicon wristband, universal fit. The xFOB™ has more than 300 hours of battery life, and is powered by an easy to change standard coin cell battery.
Quicksilver 8M0151202 Xband™ Wearable Wristband For Mob+™, Red - 8M6007090 - 710-8M6007090F1
Enables you to wear the xFOB on your wrist. Highly durable and comfortable marine silicon wristband, universal fit. The xFOB™ has more than 300 hours of battery life, and is powered by an easy to change standard coin cell battery.
Quicksilver 8M0151201 Xfob™ For Mob+™ - 8M6007089 - 710-8M6007089F1
Purchase additional xFOB's for passengers or for additional users of the same vessel. Up to four xFOB's can be actively connected to one xHUB and are completely interchangeable. Water resistant up to 3 meters / 10' (IP68)Uses a standard CR2032 lithium coin battery (included) minimum 300 hours of active use
Quicksilver 8M0151199 Mob+™ Basepack Kit - 8M6007088 - 710-8M6007088F1
The MOB+™ Wireless Man Overboard System is an innovative, ABYC compliant, life-saving safety device for your boat. It provides greater freedom of movement than a traditional kill switch lanyard, and stops the engine should you fall overboard. The system consists of an easy to install xHUB™ (mounted on or near the boat console) and a wearable xFOB™. The two communicate wirelessly with each other and stop the engine when the xFOB is submerged in water or is beyond range of the xHUB. The xFOB™ can be worn on your wrist, around your neck, or clipped to your PFD using either our xBAND™ or xTAG™ accessories. Up to four xFOB's can be connected to the xHUB at the same time, with one unit acting as the captain's stop unit, and the additional three as alarm units for passengers. The xFOB™ has more than 300 hours of battery life, and is powered by an easy to change standard coin cell battery. The xHUB™ connects to your boat power (12V-24V) and to your engine stopping system. Intuitive and easy to use through a one-click user interface. Compatible with all major outboard and most sterndrive engine brands. Basepack Kit includes 1 xHUB, 1 xFOB, Wire Harness & connectorsxFOB can be worn using either the xBAND or xTAG accessories-sold separatelyxHUB requires a standard 2-1/16" dia. hole or a bracketCompliant with ABYC A-33, E11, CE & FCCxHUB Power Consumption: Active Mode: 180mA (2.5W max. at 13.8Vdc) Standby: 30mA, 0.4W max. at 13.8V
Quicksilver 8M0150152 Flo-Torq Ssr Hub Kit - 8M0150152 - 710-8M0150152F1
Specifically designed with the new Mercury FourStroke V6 engine to virtually eliminate prop rattle and shift clunk, providing a quieter boating experience. Also works well on 75 ? 150 horsepower FourStroke engines.For use with select current Mercury/Mariner FourStroke outboards 40 CT ? 225 HP (1" prop shaft) & Mercruiser Bravo One Sterndrives in general purpose applications. Fits: 40 HP ? 60 HP CT FourStroke (All Years), 75 HP ? 115 HP FourStroke (2014 and Newer), 150 HP FourStroke (2011 and Newer), 175 HP ? 225 HP FourStroke (2018 and Newer). Includes: Drive sleeve, aft adapter 835467Q01 Thrust washer 8M0056234 Prop nut kit. Not for use with legacy Two or FourStroke outboards or Alpha One sterndrives.
Quicksilver 8M0146203 Water Separating Fuel Filter Element W/O Bowl, Spin On - 8M0146203 - 710-8M0146203F1
Water separating fuel filter removes unwanted water from the fuel supply as it flows through the filter to the engine. For gasoline use only.
Quicksilver 8M0141827 Electric Efi Fuel Pump - Mercury - 8M0141827 - 710-8M0141827F1
Fuel pump only. Fittings, seals, gaskets and hose clamps sold separately.
Quicksilver 8M0139984 Body/Impeller Kit - 8M0139984 - 710-8M0139984F1
Fits 2000-2016 MCM V-6 & V-8 (305, 350 & 496 cid) engines with a brass seawater pump.
Quicksilver 8M0137263 Shift Shaft - Upper - 8M0137263 - 710-8M0137263F1
See Quicksilver Catalog for specific application information.
Quicksilver 8M0128390 75W-140 Motorcycle Transmission Oil, 1 Qt. - 8M0128390 - 710-92-8M0128390F1
Quicksilver 75W-140 motorcycle transmission oil for use in large displacement, air-cooled or liquid-cooled V-twin engine applications that use separate gear cases. Note: Not for use in wet clutch applications. Using this product will not void manufacturer warranties.
Quicksilver 8M0128385 85W-140 Motorcycle Transmission Oil, 1 Qt. - 8M0128385 - 710-92-8M0128385F1
Quicksilver 85W-140 motorcycle transmission oil for use in large displacement, air-cooled or liquid-cooled V-twin engine applications that use separate gear cases. Note: Not for use in wet clutch applications. Using this product will not void manufacturer warranties.
Quicksilver 8M0125852 Fuel Pump & Cooler Kit - 8M0125852 - 710-8M0125852F1
Fits select GM V?6 & V?8 (305, 350 & 377 cid) MPI engines. Refer to the Quicksilver catalog for up to date application information.
