Panther
Panther 550503Ne T5 Electro Steer (W/O Electronics, Remote Or Relay Switch Box) For Kicker Motor For Use With Pro 3 Trollmaster - 550503Ne - 781-550503Nef1
The T5 NE models, without electronics, connect directly to the TrollMaster Pro 3 electronic throttle and steering control unit to provide an overall solution to control the throttle and steering for a kicker motor up to 40 hp. It can be installed on any kicker motor with a threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4" between the main engine and the kicker. Mounting hardware included. 12V. Note: This is not a stand alone system and requires the TrollMaster control unit to operate.
Panther 550103 T4 Electro Steer For Kicker Motor (9" Between Motors) - 550103 - 781-550103F1
The T4 Electro-Steer features a unique solution to fit every kicker motor with a tilt tube. It installs in minutes thru the tilt tube and doesn't take any room away from your transom. Requires 9" between the main engine and kicker motor. Includes a 24' cable w/handheld remote for convenient use, connecting rod w/quick disconnects, and all mounting hardware. Optional wireless remote w/50' range available.
Panther 550065 Pontoon Kicker Motor Bracket - 55-0065 - 781-550065F1
Our Pontoon Kicker Motor Bracket Kit makes what has long been a difficult installation a breeze. The kit contains Adapter Bracket (55-0060) plus Swim Platform Bracket (55-0030) with all mounting hardware included. The Adapter Bracket mounts to the pontoon frame rails. Rated for auxiliary 4-Stroke motors up to 20 HP.
Panther 550055 Model 55 Trim And Tilt Motor Bracket For Outboards 15 To 55 Hp, Up To 250 Lbs. - 550055 - 781-550055F1
Our most popular trim and tilt is rated for outboards up to 55 HP or 250lbs. Perfectly designed for pontoons, fishing or hunting boats. A rugged 12 volt powered actuator moves the motor plate up and down, allowing the user to easily position the motor with the 12' cabled remote control. Made of 713 cast aluminum and protected with durable black powder coat, the 55 has an overall weight of 25 lbs. Provides an additional 5° of negative tuck for improved hole shot. Adapts to clamp-on or bolt-through outboards.550105: Optional wireless remote available.
Panther 550035 Model 35 Motor Lift For Up To 35 Hp Or 150 Lbs. - 550035 - 781-550035F1
This heavy-duty bracket easily handles auxiliary outboards up to 35hp or 150 pounds. Kicker motors are supported in any position with this durable design, featuring a 12 volt actuator that you control with a remote on a 12' cable. The Model 35 is the only kicker motor lift with a convertible setback. This unit will tilt your motor approximately 60°. The Model 35 is the only kicker motor lift with a convertible setback; this unit can be adjusted to 8 or 13 inches of setback, making it ideal for inboards, I/Os, jet-drives, and outboards when over the transom mounting is unavailable. Made of 713 cast aluminum. protected with durable black powder coat paint. 559035: Optional 2-piece, cast aluminum spacer kit provides an extra 3" of setback to allow most kicker motors to be tilted up without hitting transom.550105: Optional wireless remote available.
Panther 550028 4- And 2-Stroke Fixed Mount Outboard Motor Bracket Max 35Hp, 263 Lbs. - 550028 - 781-550028F1
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket. Safety cable included. Holes in poly board are predrilled for quick assembly.
Panther 550024 2 Stroke Fixed Mount Outboard Motor Bracket Max 12Hp, 85 Lbs. - 550024 - 781-550024F1
Vertical transom mount bracket. Each stainless steel bracket measures 8-1/2" long by 6-1/8" wide. 10-1/8" setback. Holes in poly board are pre-drilled for quick assembly of bracket.Use of a safety cable is recommended. (not included)
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 16" Lift, Aluminum - 550416 - 781-550416F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 4 vertical running positions.
Panther 4 Stroke Outboard Motor Bracket Max 35 Hp, 10" Lift, Aluminum - 550410 - 781-550410F1
The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. 5 vertical running positions.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 11" Lift, Stainless Steel - 550408Ss - 781-550408Ssf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 5-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 4 Stroke Outboard Motor Bracket Max 15 Hp, 10" Lift, Aluminum - 550407Al - 781-550407Alf1
Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. 4-position lock bar allows for installation flexibility for either long or short shaft motors.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - C55-8100 - 781-C558100F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558400 - 781-558400F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558200 - 781-558200F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 3" Original Gripper Rope Cleat (2 Per Pack) - 558100 - 781-558100F1
A no tie, no knot, rope cleat that will secure any rope or line, up to 3/8" diameter with no knots, is just what is needed for a variety of purposes ranging from boats and docks to trucks and trailers. You can use the Rope Cleat to secure just about any object up to 200 lbs with no knots. Engineered for years of trouble free use.
Panther 2" Set-Back Plate - 550220 - 781-550220F1
Cast aluminum spacer provides 2" of setback for bolt-on motors. Made of 713 cast aluminum, dipped in a zinc rich primer then powder coated. This solid spacer installs directly on the transom or adds additional setback to an existing jack plate. Has a standard BIA bolt pattern, but is drillable for non-standard patterns. Overall size: 16" Wx 13.25 H x 2"D. Support weight is 300HP and 635 lbs.
Panther 2 Stroke Outboard Motor Bracket Max 20 Hp, 11" Lift, Aluminum - 550021 - 781-550021F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 2 Stroke Outboard Motor Bracket Max 12 Hp, 14" Lift, Aluminum - 550012 - 781-550012F1
Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines.
Panther 2 Stroke Outboard Motor Bracket Max 10 Hp, 14" Lift, Stainless Steel - 550010 - 781-550010F1
Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8.-1/2" x 10-1/2" mounting pad. For 2-Stroke motors only, Not recommended for 4-Stroke outboards.
Panther 15 Liter Pneumatic Or Manual Pro Series Heavy Duty Oil Extractor - 756015P - 781-756015Pf1
Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products.Can be operated manually or attached to a compressor and features a 40-170 psi working range.
Panther 106124 Xps Power Steering Hose Kit, 24' - 10-6124 - 781-106124F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106122 Xps Power Steering Hose Kit, 22' - 10-6122 - 781-106122F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106120 Xps Power Steering Hose Kit, 20' - 10-6120 - 781-106120F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106118 Xps Power Steering Hose Kit, 18' - 10-6118 - 781-106118F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
Panther 106116 Xps Power Steering Hose Kit, 16' - 10-6116 - 781-106116F1
The hose kit contains two hoses - high pressure and low pressure - with fittings. The low-pressure hose is 12" longer to allow for uninterrupted travel when connected to the cylinder actuator. (One hose kit is needed per system.)
