Permatex
Permatex 57535 Seal & Lock Thread Compound, 1.18 Fl. Oz. - 57535 - 180-57535F1
Permatex™ Seal + Lock Thread Compound combines the power of a thread sealant and a threadlocker into one. Current products on the market can only seal or lock, but Permatex has created a product that does both. With this hybrid thread compound, sealed connections will not loosen and locked fittings will not leak.
Permatex 56521 High Performance Thread Sealant, 50 Ml. - 56521 - 180-56521F1
Industrial grade, specifically designed for metal and tapered pipe thread fittings. Replaces thread sealant tape or pipe dopes. Cures rapidly to prevent galling and protect mated thread areas from rust and corrosion.
Permatex 54540 Pneumatic / Hydraulic Sealant, 36 Ml. - 54540 - 180-54540F1
Designed for locking and sealing high pressure hydraulic and pneumatic systems, Pneumatic/Hydraulic Sealant contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on "as received" fasteners and controlled locking strength affords easy disassembly. Suggested Applications: Hydraulic line fittings, brake fittings, transmission fluid fittings, PTO fittings.
Permatex 51817 6 Ml. 518 Gasket Maker - 51817 - 180-51817F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 51813 50 Ml. 518 Gasket Maker - 51813 - 180-51813F1
Non-corrosive. Ideal for emergency repairs and designed primarily for use on aluminum, iron and steel mating surfaces. Fills gaps up to .015". Cures to a solvent resistant seal that will not tear or decay during service.
Permatex 27835 High Strength Threadlocker Red Gel, 35 Gr., Red - 27835 - 180-27835F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Permatex 27005 High Strength Threadlocker Red Gel, 5 Gr., Red - 27005 - 180-27005F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Permatex 25224 The Right Stuff Gasket Maker, 7 Oz. - 25224 - 180-25224F1
Return equipment to service immediately when you make leak-proof gaskets in just one minute with the Right Stuff.® This latest elastomeric rubber gasket technology is blowout resistant and outperforms pre-cut gaskets. Resists ATF, coolant, oil and other shop fluids. Protects against leaks caused by vibration and thermal expansion. Sensor-safe.
Permatex 25005 High Strength Removable Threadlocker Gel, 5 Gr., Orange - 25005 - 180-25005F1
Permatex® High Strength Removable Orange Threadlocker Gel is a hybrid formula that combines the strength of Red Threadlocker with the removability of Blue Threadlocker. Orange Threadlocker Gel is ideal for modern day engine bays with a great deal of lightweight components and high vibration applications. Unlike traditional Red Threadlocker, Orange Threadlocker can be removed with hand tools when extra force is applied.
Permatex 24835 Medium Strength Threadlocker Blue Gel, 35 Gr., Blue - 24835 - 180-24835F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Permatex 24240 - 242 Blue Threadlocker Bottle, 36 Ml. - 24240 - 180-24240F1
Threadlocker Blue eliminates the need for lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects thread from corrosion. Medium strength for easy disassembly.
Permatex 24200 - 242 Blue Threadlocker Tube, 6 Ml. - 24200 - 180-24200F1
Threadlocker Blue eliminates the need for lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects thread from corrosion. Medium strength for easy disassembly.
Permatex 24005 Medium Strength Threadlocker Blue Gel, 5 Gr., Blue - 24005 - 180-24005F1
OEM specified. Gel formula provides liquid-reliability without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Permapoxy™ 5 Minute General Purpose Epoxy - 84101 - 180-84101F1
Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents.Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI.
Permanent Strength Threadlocker Red - 26240 - 180-26240F1
OEM specified. A permanent, high strength product that is applied to fasteners 3/8" to 1" (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Suggested Applications: Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts.
Penetrating Threadlocker 290 - 29000 - 180-29000F1
A low viscosity liquid that wicks along the threads of pre-assembled fasteners to secure them in place. Applied after assembly.
P 6 Ml #271 High Threadlocker - 27100 - 180-27100F1
A high strength adhesive that strengthens slip and press fit assemblies. Retains bearings, preventing spinout and thread corrosion. Requires extra effort or special tools for disassembly.
High Temperature Thread Sealan - 59214 - 180-59214F1
High temperature. Locks and seals threaded fittings. Resists leakage, vibrations, loosening, moisture, hydraulic fluids and diesel fuels. Won't shred or wear like thread sealant tape.
High Tack Gasket Sealant - 80062 - 180-80062F1
A fast drying sealant that dries to a highly tacky, non-brittle film. Temperature range -65° F to 500° F. Resists gasoline, oil, antifreeze, and axle lube. Good for valve cover, carburetor, fuel pump, and manifold gaskets.
Gel Twist Med-Strength - 24010 - 180-24010F1
Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion.
Gel Twist High-Strength - 27010 - 180-27010F1
Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion.
Fuel Tank Repair Kit - 84334 - 180-84334F1
Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS).
Fast Orange Professional Pumice Hand Cleaner - 25419 - 180-25419F1
A hand cleaner for the Professional! The leading citrus hand cleaner brand, Fast Orange, has formulated a heavy duty hand cleaner infused with odor eliminator technology. The new formula removes the heaviest of grease and grime, including tar, oil, dirt, soils, resins, printer's ink, paint, glue, rubber cement, gasketing residue and tile cements from your hands leaving them looking and feeling clean. In addition, the Professional Series is simultaneously eliminating any gasoline or other odor residues that can linger after a job. This product leaves your hand not only feeling great, but also smelling fresh! Fast Orange Professional contains premium skin conditioners, including lanolin, aloe era and jojoba to sooth raw, rough hands. Always test for color fastness and suitability by applying on an inconspicuous area. Heavy Duty CleaningOdor Eliminator TechnologyPumiceFresh ScentSkin Conditioners
Fast Orange Hand Cleaner, 1 Gal, 4/Case - 25219 - 180-25219F1
Biodegradable, waterless, petroleum solvent-free hand cleaner that contains no harsh chemicals, mineral oils or ammonia that can sting cuts and abrasions. Fresh-smelling natural citrus power does the cleaning. Fortified with aloe, lanolin, glycerin, and other skin conditioners. Fine Pumice formula gently deep cleans the toughest dirt. Works great on laundry stains, scuff marks, tile floors, pet odors and other household cleaning needs.
Dielectric Tune-Up Grease, 3 Oz - 22058 - 180-22058F1
Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots.
