Pullrite

Pullrite 3366 Quickconnect Multi-Fit Capture Plate For Lippert King Pin Box Models - 3366 - 337-3366F1

Pullrite, Miscellaneous

$239.49

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #3366 fits Lippert model number 0719.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than the measurement listed which is 12", 12 1/4" and 12 3/4" for part #3366.B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate. Part #3366 accommodates 5 3/16" through 6 5/8".C: Measure from the rear edge to the leading edge of the king pin plate. Part #3366 accommodates all sizes.

Pullrite 3365 Quickconnect Multi-Fit Capture Plate For Fabex & Lippert King Pin Box Models - 3365 - 337-3365F1

Pullrite, Miscellaneous

$239.49

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #3365 fits Fabex and Lippert model numbers 500's, 765, 770, 1621, 1621 HD, 1116, & 1716.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than the measurement listed which is 12 3/4" through 13 1/2" and 14" for part #3365.B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate. Part #3365 accommodates 2 9/16" through 4".C: Measure from the rear edge to the leading edge of the king pin plate. Part #3365 accommodates all sizes.

Pullrite 331760 Quick Connect Capture Plate Fits Trailair Rota-Flex King P Rvx - 331760 - 337-331760F1

Pullrite, Miscellaneous

$228.69

Pullrite 331758 Quick Connect Capture Plate For Most Trailair Airbag/Shock King Pin Box Models - 331758 - 337-331758F1

Pullrite, Fasteners & Hardware

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331758 fits Most Trailair Airbag/Shock Pin Box models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13 3/8".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 7 3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 13 1/2".

Pullrite 331757 Quick Connect Capture Plate For Trailair Tri Glide Airbag/Shock King Pin Box Models - 331757 - 337-331757F1

Pullrite, Fasteners & Hardware

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331757 fits Trailair Tri Glide Airbag/Shock Pin Box models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 12 3/4".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 5 15/16".C: Measure from the rear edge to the leading edge of the king pin plate. Part #331757 accommodates all sizes.

Pullrite 331756 Quick Connect Capture Plate For Most Trailair Rota-Flex King Pin Box Models - 331756 - 337-331756F1

Pullrite, Fasteners & Hardware

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331756 fits most Trailair Rota-Flex Pin Box Models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13 3/8".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 5 3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 11 7/16".

Pullrite 331730 Quick Connect Capture Plate For Most Leland King Pin Box Models - 331730 - 337-331730F1

Pullrite, Fasteners & Hardware

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331730 fits most Leland models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 14".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 5 1/2".C: Measure from the rear edge to the leading edge of the king pin plate which should be 12 1/4".

Pullrite 331726 Quick Connect Capture Plate For Gen-Y, King Pin Boxes 15.43" W X 15.84" L X 8.32" D - 331726 - 337-331726F1

Pullrite, Fasteners & Hardware

$231.99

Required component of the Super Glide fifth wheel towing system. Created for your trailer's king pin box for quick install and removal for your convenience. Used with Gen-Y pin boxes that are 12" wide

Pullrite 331723 Quickconnect Capture Plate For Lippert King Pin Box Models - 331723 - 337-331723F1

Pullrite, Miscellaneous

$237.99

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13-1/4".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 3-3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".

Pullrite 331711 Quickconnect Capture Plate - 331711 - 337-331711F1

Pullrite, Miscellaneous

$228.69

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331707 fits MOR/ryde Pin Box Model Rubber Cushion.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13 1/2".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 7 5/16".C: Measure from the rear edge to the leading edge of the king pin plate which should be 17 1/2".

Pullrite 331707 Quickconnect Capture Plate For Mor/Ryde King Pin Box Model Rubber Cushion - 331707 - 337-331707F1

Pullrite, Fasteners & Hardware

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331707 fits MOR/ryde Pin Box Model Rubber Cushion.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13 1/2".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 7 5/16".C: Measure from the rear edge to the leading edge of the king pin plate which should be 17 1/2".

Pullrite 331705 Quickconnect Capture Plate For Lippert King Pin Box Models - 331705 - 337-331705F1

Pullrite, Miscellaneous

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331705 fits Lippert 1621, 1116, and 1716 models.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 13-1/4".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 3-3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 8-7/8".

Pullrite 331704 Quickconnect Capture Plate For Lippert King Pin Box Models - 331704 - 337-331704F1

Pullrite, Miscellaneous

$242.09

Capture Plates are a required component of the SuperGlide hitch system. When the trailer is hooked up to the hitch, the Capture Plate's wedge isolates the king pin from turning in the fifth wheel plate, causing the Cam Assembly to activate and allowing the SuperGlide to move as turns are being made. Part #331704 fits Lippert 1621.Most applications slip over the king pin and are held in place by a set screw. Follow the instructions below to determine your correct Capture Plate.1) Determine if manufacturer name and model number located on your pin box are one of the options shown above.2) To ensure correct fit, make the necessary A, B and C measurements:A: Measure the king pin plate from side-to-side. This is the mostimportant measurement. Be sure that this measurement is no morethan 1/16" less than 12 3/4".B: Measure from the leading edge of the king pin to the leading edge ofthe king pin plate, which should be 3 3/8".C: Measure from the rear edge to the leading edge of the king pin plate which should be 8 7/8".

Pullrite 3200 Isr Series Superglide, 14,000 Lb. - 3200 - 337-3200F1

Pullrite, Miscellaneous

$3,473.49

Designed specifically for the new "shorter than a short bed" trucks - like modern 1/2 ton trucks with beds shorter than 6 feet. 22-3/4" of travel and quickly moves your trailer away from the cab of the truck during turns and backing up, to avoid contact with the truck cab.See www.pullrite.com for current applicationn information.