Select Category
Brands
Seadog Dual Round Voltmeter - 421616-1 - 354-4216161F1
This digital dual voltmeter displays voltage for main and auxiliary batteries simultaneously. The compact size allows installation in a wide variety of locations. Red LED display. IP65 rating. Injection molded nylon.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521125 - 354-521125F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Exhaust Thru Hull | Cast 316 Stainless | Includes Stainless Flap With Rubber Seal - 521130 - 354-521130F1
Stainless flap with rubber seal. Cast 316 Stainless.
Seadog Fillet Table Rod Holder Mount - 326510-3 - 354-3265103F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders
Seadog Fillet Table Rod Holder Mount - 326515-3 - 354-3265153F1
Solid one-piece construction for long life and easy maintenanceEasily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storageUV stabilized high-density polypropylene constructionAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holdersHose holder and towel bar
Seadog Flush Mount Combo Drink Holder W/Drain Fitting - 588065 - 354-588065F1
Flush Mount Combo Drink Holders with Drain Fittings feature a dual-purpose design that allows the use of beverage cans with or without insulated can wraps, as well as most standard size bottles. Integral drain fitting allows water to be drained directly into the bilge with the use of 1/4" tubing (not included). Requires a 3-5/8" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed of corrosion resistant stamped 304 stainless steel.
Seadog Flush Mount Stainless Steel Rod Holder - 325176-1 - 354-3251761F1
Flush Mount Rod Holders are constructed of corrosion resistant formed 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).
Seadog Grab Handle, Black - 227560-1 - 354-2275601F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Grab Handle, White - 227561-1 - 354-2275611F1
Soft Grip Handle with concealed fasteners (included). Constructed of injection molded nylon with PVC coating.
Seadog Hand Rail Bow Form, Outside Diameter 7/8", 316 Stainless - 295110-1 - 354-2951101F1
These Hand Rail Tees are constructed of investment cast 316 stainless steel for corrosion resistance and durability. Includes set screws where appropriate. Designed for use with 7/8" stainless tubing with a wall thickness of 0.049".
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321291-1 - 354-3212911F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321292-1 - 354-3212921F1
Hatch Latches are constructed of corrosion resistant stamped 304 stainless steel. Simple screw-in action holds hatch securely in closed position. Installs with four #10 RH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat. The large size works on cleats up to 24"! WLL - 2,185 lbs.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
