Select Category
Brands
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431152-1 - 354-4311521F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431153-1 - 354-4311531F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412111B-3 - 354-412111B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412118B-3 - 354-412118B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412121B-3 - 354-412121B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412128B-3 - 354-412128B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412131B-3 - 354-412131B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412138B-3 - 354-412138B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412118W-3 - 354-412118W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412121W-3 - 354-412121W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412128W-3 - 354-412128W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412138W-3 - 354-412138W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412171B-3 - 354-412171B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 24V Mrv Wiper Motor | Black Finish - 412178B-3 - 354-412178B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412321B-3 - 354-412321B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & Stainless Standard 12V Wiper Motor | 2-1/2" Shaft | Black Finish - 412328B-3 - 354-412328B3F1
Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 14" arm/blade combination (21" total length) using standard wiper arms. Same footprint as competitive standard wiper motors. Black only. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421B-1 - 354-412421B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | Black Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428B-1 - 354-412428B1F1
Standard Wiper Motor Kit includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412421W-1 - 354-412421W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Standard Wiper 12V Motor Kit | White Motor Finish | Includes Motor, 11" To 13" Arm & 11" Blade - 412428W-1 - 354-412428W1F1
Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2"-12-1/2"), and an 11" curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254106-1 - 354-2541061F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254118-1 - 354-2541181F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Mount Hand Rail - Formed 304 Stainless Steel - 3/4" Outside Diameter - 5/16" Fastener - 254124-1 - 354-2541241F1
Formed 304 stainless steel stud mount hand rail. Use 5/16" fasteners.
Seadog Stud Style Transom Mount Ski Tow - 371631-1 - 354-3716311F1
The Stud Style Transom Mount Ski Tow is constructed of AISI formed 316 stainless steel rod for corrosion resistance and durability. Designed to bolt through the transom for maximum strength.
Seadog Surface Mount Hand Rail | Formed 304 Stainless Steel | 1" Outside Diameter | 5/16" Fastener - 254312-1 - 354-2543121F1
Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1" OD tubing for a comfortable grip.
