Select Category
Brands
12" X 18" Trim Tab Kit W/O Switch - 15008-101 - 622-15008101F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately
12" X 30" Trim Tab Kit W/O Switch - 15010-101 - 622-15010101F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately
12" X 9" Edge Mount Electric Trim Tab Kit W/O Switch - 15015-101 - 622-15015101F1
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 12" long models 11". Kit Includes: 12-volt actuators (2) with 6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel trim tab blades, 12 gauge (2)Stainless Steel mounting hardware Switch kit sold separatelyStainless steel mounting hardwareSwitch kit sold separately
12"L X 9"W Replacement Standard Blade Only - 20159-001 - 622-20159001F1
Replacement SS Standard Blade Only
12# Flash Weight - 2295190 - 627-2295190F1
Cannon Trolling Flash Weights™ incorporate a flashing prism design for extra lure power. They are black vinyl coated. The Keel keeps weight tracking accurately and prevents cable twisting.
12° Tilt Bronze Thru-Hull Ducer - 010-10982-21 - 322-0101098221F1
Dual frequency (50/200kHz) transducer is specially designed to provide a vertical beam without a fairing block. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 3/16" extending outside of the hull. Includes a built-in temp sensor and handles up to 600 watts (RMS) power. Includes 39' cable.
120-Rmam Series Fuel / Water Separator - 120Rmam30 - 62-120Rmam30F1
The 120RMAM fuel filter/water separator features a unitized mounting bracket for mounting versatility and 2 inlet/outlet ports. It also features an Aquabloc® II replacement element that repels water and removes solid contamination.
120/T-10 Brushing Thinner-Gal - 11212006 - 93-120Gf1
A general purpose thinner. Many paints when stored for some time before use will increase in viscosity and should be thinned. Evaporates at a moderatre rate and is completely out of the paint film in several hours
120/T-10Q Brushing Thinner-Qt - 11212008 - 93-120Qf1
A general purpose thinner. Many paints when stored for some time before use will increase in viscosity and should be thinned. Evaporates at a moderatre rate and is completely out of the paint film in several hours
120/T-10Q Brushing Thinner-Qt - 211212008 - 93-120Caqf1
A general purpose thinner. Many paints when stored for some time before use will increase in viscosity and should be thinned. Evaporates at a moderatre rate and is completely out of the paint film in several hours
121/T-8 Spraying Thinner-Gal - 11212106 - 93-121Gf1
121 Spray Thinner for Antifouling is a fast evaporating thinner used to reduce products before spray application. The thinner flashes out rapidly.
121/T-8 Spraying Thinner-Quart - 11212108 - 93-121Qf1
121 Spray Thinner for Antifouling is a fast evaporating thinner used to reduce products before spray application. The thinner flashes out rapidly.
121Fw Stainless Steel Flat Washers, 1/2", 50/Box - 5055-222 - 828-121Fwf1
18-8 stainless steel.
121Hn Stainless Steel Hex Nuts, 1/2", 50/Box - 5026-022 - 828-121Hnf1
18-8 stainless steel.
121Ln Stainless Steel Nyloc Nuts, 1/2" Nc, 50/Box - 5034-022 - 828-121Lnf1
18-8 stainless steel.
121Lw Stainless Steel Lock Washers, 1/2", 100/Box - 5058-022 - 828-121Lwf1
18-8 stainless steel.
121Wf Stainless Steel Fender Washers, 50, 1/2"/Box - 5057-400 - 828-121Wff1
18-8 stainless steel.
12241Hn Stainless Steel Hex Nuts, 12-24, 100/Box - 5035-012 - 828-12241Hnf1
18-8 stainless steel.
123Fw Galvanized Flat Washers, 1/2" - 856-622 - 828-123Fwf1
Hot Dipped Galvanized.
125/250V Cordset - 25' - 6152Spprv-25 - 679-6152Spprv25F1
Watertight molded plug and connector Heavy duty, super flexible marine-grade cable (6 gauge) Includes standard threaded ringCorrosion resistant, nickel plated contacts Power Indicator Light: Boat side connector with molded-in LED light. Glows red when you have powerContour Grip with Thumbprint Locator ParkPower Easy Lock system: quickly locks the cord set to the inlet Female Connector: 50A/125V Locking. Male Plug: 50A/125V, 3-Pole, 4-Wire RV
1250 Gph Low Boy Bilge Pump, 12V - 33103 - 189-33103F1
Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines. Shaft seal: lip sealRemovable cartridge, easy to cleanWater cooled motorComplies to ABYC, NMMA and ISO8849 marine specifications3 year warranty
