Sea-Dog Line
Sea-Dog 3265353 Fillet & Prep Table Square Rail Mount, A:30", B:12-5/8", C:13-1/2", D:2-3/8", Large, Fits Tubing: 1"-1-1/4" - 326535-3 - 354-3265353F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265303 Fillet & Prep Table Square Rail Mount, A:20", B:12-5/8", C 13-1/2", D:2", Medium, Fits Tubing: 1"-1-1/4" - 326530-3 - 354-3265303F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits square tubing 1" - 1-1/4" diameterAssembles in minutes, all assembly hardware includedEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265253 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2-3/8", Large, 3/4"-1-1/4" - 326525-3 - 354-3265253F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3265203 Fillet & Prep Table Round Rail Mount, A: 20", B:12-5/8", C:13-1/2", D:2", Medium, 3/4"-1-1/4" - 326520-3 - 354-3265203F1
Solid one-piece construction for long life and easy maintenanceUV stabilized high density polypropylene constructionMedium: 20" wide by 12-5/8" deep, Large: 30" wide by 12-5/8" deepFits round tubing 3/4"-1-1/4" diameterEasily accessible knife and pliers holders, large table features additional hose holder and towel barKnives and pliers not included
Sea-Dog 3256241 4-Rod Storage Rack - 325624-1 - 354-3256241F1
Constructed of extremely durable, high-strength UV resistant polypropylene. For horizontal and overhead installation. Rods are secured with bungee cord attachment. Installs with twelve #8 FH fasteners (included).
Sea-Dog 325168 Flush Mount Rod Holder W/Stainless Top - 325168-1 - 354-3251681F1
Constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8". Installs with three #12 FH fasteners (not included).
Sea-Dog 3250651 Narrow Gunnel Rod Holder W/Stainless Top - 325065-1 - 354-3250651F1
This Narrow Gunnel Flush Mount Rod Holder with Stainless Top is designed for narrow gunnel applications. Accommodates rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV resistant injection molded ABS with highly polished investment cast 316 stainless top. Installs with three #10 FH fasteners (not included).
Sea-Dog 325041 Pvc Clips For Track Rod Holder - 325041 - 354-325041F1
Designed to hold fishing rods in the toughest conditions. Track sold separately
Sea-Dog 3222701 Ladder Locks, Chrome - 322270-1 - 354-3222701F1
Ladder Locks are commonly used with wooden step ladders. Ladder slips into tapered locks and becomes secure as it is lowered in to place. Installs with eight #10 FH fasteners (not included). Highly polished chrome.
Sea-Dog 321850 Chain Gripper Plate - 321850-1 - 354-3218501F1
Stabilizes anchor chain and reduces stress on windlass when anchored in heavy seas. The two holes are used for a bridle application with two Sea-Dog® Bow Shackles (147212) for connecting lines to port and starboard cleats for stabilization. Fits anchor chain sizes: 5/16", 3/8", 7/16" and 1/2".
Sea-Dog 321805 Stainless Steel Hinged Chain Deck Pipe - 321805 - 354-321805F1
Investment cast 316 stainless chain deck pipe. Use #10 fastener.
Sea-Dog 3216601 Hatch Spring - 321660-1 - 354-3216601F1
Formed 304 Stainless Steel.
Sea-Dog 3216501 Hatch Spring - 321650-1 - 354-3216501F1
The Sea-Dog Stainless Steel Hatch Spring has an internal wire that prevents the spring from being overextended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and overextend.
Sea-Dog 3215991 Gas Lift Rod End Fitting - 321599-1 - 354-3215991F1
Unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings. Self-cleaning orifice.
Sea-Dog 3215861 Gas Lift Ball Stud-10Mm - 321586-1 - 354-3215861F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321586 Gas Lift Ball Stud - 10Mm - 321586 - 354-321586F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215831 Flush Gas Lift - 321583-1 - 354-3215831F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215821 90° Gas Lift Mount-Mount-Wide - 321582-1 - 354-3215821F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 3215811 90° Gas Lift Mount-Narrow - 321581-1 - 354-3215811F1
Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.
Sea-Dog 321492 Gas Filled Lift Spring - 321492-1 - 354-3214921F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321488 Gas Filled Lift Spring - 321488-1 - 354-3214881F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214861 Gas Filled Lift Spring - 321486-1 - 354-3214861F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214841 Gas Filled Lift Spring - 321484-1 - 354-3214841F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 3214831 Gas Filled Lift Spring - 321483-1 - 354-3214831F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
Sea-Dog 321482 Gas Filled Lift Spring - 321482-1 - 354-3214821F1
Gas filled lift spring with unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings.
