Sea-Dog Line
Large Replacement Hook - 491052-1 - 354-4910521F1
Replacement boat hook end.
Knob Maneuvering Cast Ss - 230106-1 - 354-2301061F1
A steering knob attaches to the wheel for use in situations where maneuvering is excessive. It allows the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance this knob is designed for use with 1" x 3/4" oval tubing.
Knife & Pliers Holder - 325925-1 - 354-3259251F1
This Knife & Pliers Holder is great for storing knives, pliers, and fishing lures. Constructed of injection molded polypropylene it installs with two #8 FH fasteners (included).
Kill Switch Replacement Lanyard - 420489-1 - 354-4204891F1
Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill. WARNING: Test switch for proper function before each use. Replace lanyard if worn, cut or frayed.
Jaw Slide, Hinged 7/8" Black, Each - 273162-1 - 354-2731621F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Internal Square Eye End, 7/8" X 7/8" Stainless, Each - 270191-1 - 354-2701911F1
Corrosion resistant investment cast 316 stainless steel construction. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. For use as an insert for 1-1/4" square tubing (1" x 1" inside dimensions). 1/4" Pin size.
Internal Eye End, 7/8" White, Pair - 273181-1 - 354-2731811F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 7/8" Black, Pair - 273180-1 - 354-2731801F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 7/8 Stainless, Each - 270180-1 - 354-2701801F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4" White, Pair - 273176-1 - 354-2731761F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4" Black, Pair - 273175-1 - 354-2731751F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Internal Eye End, 3/4 Stainless, Each - 270175-1 - 354-2701751F1
Top inserts connect to 3/4" or 7/8" round tubing and create an attachment point to function as a pivot point as part of a Bimini top system. Available in black, white or 316 stainless steel. 1/4" Pin size. *Stainless tube wall thickness 0.049".
Inside Eye End Bracket, White - 273370-1 - 354-2733701F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
Inside Eye End Bracket, Black - 273369-1 - 354-2733691F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
Inline Fuse Holder (Waterproof - 420555-1 - 354-4205551F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420554-1 - 354-4205541F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420553-1 - 354-4205531F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder (Waterproof - 420552-1 - 354-4205521F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline Fuse Holder - 445199-1 - 354-4451991F1
ATO/ATC Inline Fuse Holder is constructed of injection molded, fiberglass reinforced nylon. Designed to accept ATO/ATC automotive-style spade terminal fuses. Maximum: 30A. 14 gauge 4" AWG wire lead. Fuse not included. Use with fuses (445101-445130).
Inline Fuse - 420500-1 - 354-4205001F1
AGC Inline Fuse Holder is constructed with Injection molded nylon. Overcurrent protection in a convenient push together inline holder. To install, cut a 11-1/2" wire lead from 14 gauge wire and strip both ends. For use with standard AGC 1/4" x 1-1/4" glass style fuses. Maximum 20A @ 12VDC. 20A AGC fuse included.
Inline 50 Amp Fuse Holder - 420557-1 - 354-4205571F1
AGC Watertight Inline Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse.
Inline 30 Amp Fuse Holder - 420565-1 - 354-4205651F1
ACG Watertight Inline Dual Fuse Holder is constructed of injection molded PVC. Feature snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" glass fuse and an extra emergency fuse. Fuse holder has a specially designed case that is molded with a second fuse pocket for convenient access to a spare fuse.
