Sea-Dog Line
Sea-Dog Utility Cordage, 3/16" X 50' - 303305050-1 - 354-3033050501F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Utility Cordage, 1/8" X 50' - 303303050Wh-1 - 354-303303050Wh1F1
Solid braided polyester cord hank. Excellent for many quick tie and flag halyard uses. Mold and rot resistant.
Sea-Dog Outboard Motor Safety Cable - 371599-1 - 354-3715991F1
Vinyl coated galvanized steel wire.Comes complete with Sea Dog #156060 snap hook.
Sea-Dog Op40002 Dome Light Replacement Switch - 0P40002 - 354-Op40002F1
Sea-Dog Line 916001Inl "The Inland Spinner" Display - 916001-Inl - 354-916001Inlf1
Focus is on Freshwater or Inland Boating. 168 SKUs Merchandisers are available complete with product, back tags, sign, display panel and peg hooks completely set up in a box. A planagram version (P) without plastic panel and peg hooks may also be ordered at a lower cost. Panel dimensions are 16" x 24", 2 panels per side plus 4" for header card. Panels fit Sea-Dog® spinners. Spinner Base with Casters sold separately.
Sea-Dog Line 4267111 Screw Terminal Buss Bar, 10 Terminals - 426711-1 - 354-4267111F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 4267101 Screw Terminal Buss Bar, 5 Terminals - 426710-1 - 354-4267101F1
This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. #8-32 terminals. Installs with two #10 RH fasteners (not included).
Sea-Dog Line 4203905 2 Position On-Off Switch, 25 Pieces In A Fishbowl Display - 420390-5 - 354-4203905F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4203901 2 Position On-Off Switch - 420390-1 - 354-4203901F1
One circuit, normally off, two positions: Off/On. Stamped brass. 15 amps @12VDC. 3/8" x 1" Shaft.
Sea-Dog Line 4201011 Toggle Switch (Spst) - On/Off - 420101-1 - 354-4201011F1
Water resistant Toggle Switches are constructed of stamped brass, injection molded nylon, and polycarbonate. Features a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. 15A @ 12VDC.
Sea-Dog Line 2270301 Elbow Catch, Black, A:,1-1/8" B:1-5/16", #6 Fh - 227030-1 - 354-2270301F1
Ideal for holding inactive doors shut. Constructed of UV resistant injection molded nylon. Surface mounts with four #6 FH fasteners (not included).
Sea-Dog Line 2224151 Ring Pull, Cast Brass, A:2-1/2" , B:2", C:3/16", D:1/8", E:1-1/2", #8 Fh - 222415-1 - 354-2224151F1
Constructed of sand cast brass, these ring pulls are ideal for use on doors, cabinets, chests and drawers. Rings pivot out to open cabinets, etc. and lay flush when not in use. Installs with four #4 FH fasteners (not included).
Sea-Dog Led Flush Mount Courtesy Light, Round, Blue Leds - 401274-1 - 354-4012741F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Led Flush Mount Courtesy Light, Oval, Blue Leds - 401279-1 - 354-4012791F1
Fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.
Sea-Dog Kill Switch 7 Key Universal Lanyard - 420495-1 - 354-4204951F1
This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50" lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.
Sea-Dog Kill Switch 10 Key Universal Lanyard - 420496-1 - 354-4204961F1
This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50" lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.
Sea-Dog Illuminated Toggle Switch, On/Off/On - 420118-1 - 354-4201181F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Illuminated Toggle Switch, On/Off - 420111-1 - 354-4201111F1
Illuminating Toggle Switches are constructed of stamped brass and injection molded nylon with a polycarbonate toggle. Features a locking ring and lever seal to resist water penetration. Illuminates red in the ON position. Fits panels up to 1/4" thick and requires a 15/32" mounting hole. 1/4" spade terminals make it easy to install. 15A @ 12VDC.
Sea-Dog Galvanized Shackle-Load Rated , A:7/8" , B:1-1/4, C:2", D:2-3/4", Max Load: 4-3/4 Ton - 147619 - 354-147619F1
With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are load rated.
Sea-Dog Dual Power Socket - 426130-1 - 354-4261301F1
Stamped brass/plastic. Dual Power Socket allows two separate 12 volt devices to be operated at the same time using a power socket or cigarette lighter. Has internal 10 amp fuse. LED indicator light. 12 volt, sockets rated at 5 amps each.
Sea-Dog Deluxe Led Courtesy Light, Down Lighting, Blue - 401421-1 - 354-4014211F1
Constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. These lights feature 3 low amperage, long life LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9©28VDC. IP67 waterproof rating.
Sea-Dog Boat Hook To Lock Button Accessory Adapter - 491060-1 - 354-4910601F1
Allows the Sea-Dog boat hook and boat pole with universal/Acme threads to be used with Shurhold™ and other accessories that have a lock button attachment system. Fiberglass filled injection molded nylon.
Sea-Dog Boat Hook Mooring Cover Support Crown, 6-1/2" Dia. - 491110-1 - 354-4911101F1
An injection molded nylon crown that fits the tip of an adjustable boat hook or any universal/Acme thread that is used to support a mooring cover or canvas. The unique design has strap or line attachment details allowing the ability to secure the support crown in the correct location eliminating problems caused by water pooling pressures from rain, sleet or snow. Combine any of Sea-Dog's Boat hooks or boat poles with the support crown 4911101 and mooring cover support crown straps 4911151 (sold separately) for the perfect solution to pooling pressure.
Sea-Dog Boat Hook Mooring Buoy Snap Spare Keeper Plate Only - 491056-1 - 354-4910561F1
Keeper plate for attaching to a boat hook (boat hooks have predrilled mounting holes). 304 Stamped stainless.
Sea-Dog Boat Hook / Paddle Clip - 491361-1 - 354-4913611F1
This one-piece Boat Hook/Paddle Clip allows for the simple, one handed storage of your boat hook or paddle. Features leash attachment points for securing a paddle leash. Anti-snag ramps prevent line from getting stuck under the clip when not in use. Constructed of UV stabilized injection molded nylon.
