Seachoice
Seachoice Fender Rack Sign - Fenderracksign - 50-Fenderracksignf1
Material: Foam CoreTwo sidedFender Rack, Sign & Sign HolderModel: FENDERRACKSturdy, powder coated steel construction3 Adjustable shelvesThis item is intended for indoor useCompartments measure 23" W x 23.5" D (interior). Compartment height depends on shelf placementHardware included (nuts, bolts & washers). Assembly requiredModel: FENDERRACKSIGNMaterial: Foam CoreTwo sidedModel: FENDERSIGNHOLDPVC plasticGrip capacity: 3/16" to 1/4" thickCovered with sponge double-sided tape on the bottom
Seachoice Female Brass Tee Fitting 1/4" Npt - 50-20891 - 50-20891F1
Used to withdraw fuel from a single tank for dual motors or to withdraw fuel from dual tanks for a single motor. NOT TO BE USED IN POTABLE WATER SYSTEMS.
Seachoice Eyelet Stud With Tapping Screw, #8 X 5/8" Qty. 4 - Rp-Mp7246Sc - 50-59856F1
Stainless Steel.
Seachoice Eyelet Stud With Tapping Screw, #8 X 3/8" Qty. 4 - Rp-Mp7245Sc - 50-59854F1
Stainless Steel.
Seachoice Eyelet Stud With Brass Machine Screw, 8-32 X 3/8" - Rp-Mp9711Sc - 50-59911F1
Eyelet Stud With Brass Machine Screw
Seachoice Eyelet Stud W/ Tapping Stainless Steel Screw, #8 X 5/8 In., Bag Of 35 - Rp-Bp7246Sc - 50-59391F1
Seachoice Eyelet Studs With Self-Tapping Screws create a wind-proof hold for curtains and covers. Ideal for fabric-to-surface applications, these studs install in a hard surface with the #8 self-tapping screw. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Create a wind-proof hold for curtains and coversIdeal for fabric-to-surface applicationsInstalls in a hard surface with #8 self-tapping screwNickel-plated brass stud with 18-8 stainless-steel screw offer excellent corrosion resistanceBag of 35Manufacturer part number 50-59391
Seachoice Eyelet Sockets With Clinch Plates - Rp-Mp7244Sc - 50-59853F1
Eyelet Sockets With Clinch Plates
Seachoice Extra Long Thru-Hull Fitting W/ Broad Flange For 1-1/8 In. Id Hose, 3 In. Long Thread - 18181 - 50-18181F1
The Seachoice 18181 Extra Long Thru-Hull Fitting With Broad Flange is designed for installation in thick transoms or side walls, and for applications where up to 2-1/2 inches of thread are required. Fabricated of molded high-impact plastic that won't rust. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Designed for installation in thick transoms or side wallsFor applications where up to 2-1/2 inches of thread are requiredConstructed of molded high-impact plastic that won't rustFits 1-1/8 inch inner diameter (ID) hoseFits hulls up to 3-3/8 inches thickNot recommended for use below the waterlineManufacturer part number 50-18181
Seachoice External Eye Ends For 1" Od Square Tubing (2 Per Pack) - 50-76341 - 50-76341F1
External Eye End, 1" Square Black, Pair
Seachoice External Eye End For Canopy Top, 316 Stainess Steel, 1 In. Od - 75921 - 50-75921F1
Seachoice External Eye Ends for canopy tops offer superior performance and are constructed to withstand the demands of marine environments. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. External eye ends for canopy topsStainless steel construction provides excellent corrosion resistanceFits 1 inch outer diameter tubeIncludes 1/4-28 cup point set screwFits 1/4 inch boltManufacturer part number 50-75921
Seachoice External Eye End Cap For Bimini Top, Stainless Steel, 7/8 In. Od - 75801 - 50-75801F1
Designed for use as end cap fittings for canvas support hardware, this stainless steel external eye is highly durable with 316 stainless steel construction. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Suitable for use with 7/8 inch outside diameter tubeIncludes ¼ - 28 cup point set screwFor ¼ inch boltDurable construction resists corrosionProtective clear package for easy visibility and applicationManufacturer part number 50-75801
Seachoice External Eye End - 11729 - 50-75841F1
76081, 76091, 76101, 76111:Manufactured from high impact, super tough nylon.Offers superior performance. 75801, 75921:316 Stainless steel. Corrosion resistant. 1/4-28 cup pointset screw included. For 1/4" bolt.
Seachoice Exhaust Guard Covers (2 Per Pack) - 28361 - 50-28361F1
Black rubber with adjustable stainless steel clamp. Flap valve prevents following seas from entering exhaust outlet when stopping or moving slowly. All stainless steel clamps included.
Seachoice Exhaust Guard Covers (2 Per Pack) - 28351 - 50-28351F1
Black rubber with adjustable stainless steel clamp. Flap valve prevents following seas from entering exhaust outlet when stopping or moving slowly. All stainless steel clamps included.
Seachoice Epoxy Coated Battery Terminals, Includes Positive And Negative Terminals - 13661 - 50-13661F1
Seachoice Epoxy-Coated Battery Terminals are ideal for replacing your broken or worn marine battery terminals. The cast lead terminals are epoxy coated for excellent corrosion resistance. The brass wing nuts also resist corrosion. These terminals fit all standard battery posts. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Replaces broken or worn marine battery terminalsCast lead terminals with brass wing nutsEpoxy coating aids in polarity identification and corrosion resistance3/8 inch ID positive terminal; 5/16 inch ID negative terminalFits all standard battery postsManufacturer part number 50-13661
Seachoice Emergency Hand-Operated, 24 In., 8 Gpm Marine Bilge Pump, Safety Yellow Finish - 19151 - 50-19151F1
Made of rust and corrosion resistant plastic; Packed in poly bag with rigid header card 24 inch hand operated bilge pumpEssential safety accessoryComfortable hand gripRemoves 8 gallons per minuteLightweight and impact resistant plastic constructionManufacturer part number 50-19151
Seachoice Electronic Fast Fall System - 5021 - 50-53741 Superseded By: 410-5024F1
Electronically drop your anchor as fast as a free fall. Mechanical clutch free, which increases the speed of the motor on the way down, comparably as fast as you can freely drop your anchor. Drops significantly faster than a fixed speed winch. Two speeds. Fits Seachoice SS 880-2000 model Drum Winches.
Seachoice Electric Rope Cutting Gun - 79901 - 50-79901F1
Rope cutter quickly cuts and seals the end of synthetic ropes in one fast movement. 120V AC at 60 Cycle. 1.1A 100W. 5' cord.
Seachoice Dura-Lift Electronic Fuel Pump, Solid State Construction, 120 In. Lift, 11.5-9 Psi, 33 Gph - 20331 - 50-20331F1
This Seachoice Dura-Lift® Electronic Fuel Pump features premium components and solid-state construction to ensure it provides the most reliable fuel delivery possible. It offers tremendous versatility as it is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives, so it will work for the widest variety of applications. Plus, this 12-volt Fuel Pump can be used on: marine generator sets, refrigeration trucks, diesel filtration systems, industrial applications, and other diesel lift applications. It is rated for 120 inches lift, 11.5-9 psi, and 33 gph. This OEM # FACET 40222 Fuel Pump has a 1/8 inch x 27 thread. This Fuel Pump is self-regulating and has an internal check valve. It also has a 4-hour dry run, voltage spike protection, and an 80-micron Stainless Steel filter to prevent impurities from passing through the fuel system. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Premium solid-state construction and engineering ensure the surest fuel delivery possibleVersatile Fuel Pump works with wide variety of applications, is compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additivesDependable Fuel Pump is self-regulating, has an internal check valve, a 4-hour dry run, and voltage spike protectionRated for 120 inches lift, 11.5-9.0 psi, and 33 gphHas a 1/8 inch x 27 threadReliable 80-micron Stainless Steel filter prevents impurities from passing through fuel systemVersatile Fuel Pump can be used on: marine generator sets, refrigeration trucks, diesel filtration systems, industrial applications and other diesel lift applications
Seachoice Dual Usb Voltmeter, 12-24V - A13-233A-01-Bbrv - 50-15079F1
This Seachoice Dual USB Charger provides a pair of USB ports that can be used to conveniently charge or power a wide variety of devices, including all popular mobile devices. This charger has two universal USB ports that will accept virtually any USB cord or device. A protective dust cap keeps out debris and moisture, and a protective coating safeguards the charger from harsh marine elements. It also includes a volt meter with a digital display. A cut-out of 1 7/16-In. x 7/8-In. is required. This black, 2.4-amp charger requires 9V-33V DC input and produces 5V DC ± 5% output. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Twin universal USB ports can charge or power wide variety of devicesProtective dust cap keeps out debris and moistureRequires cut-out of 1 7/16-In. x 7/8-In.Black, 2.4-amp charger includes volt meter with digital displayRequires 9V-33V DC input; produces 5V DC ± 5% outputManufacturer part number 50-15079
Seachoice Dual Usb Power Adapter - 50-15071 - 50-15071F1
Use with mobile phones, iPad, iPod, iPhones, MP3, digital cameras, etc. Features an LED indicator light and plugs into most cigarette lighters or 12V accessory outlets to allw use of up to 2 USB devices.
Seachoice Dual Usb Outlet, 12-24V - A13-208 - 50-15069F1
This Seachoice Dual USB Charger provides a pair of USB ports that can be used to conveniently charge or power a wide variety of devices, including all popular mobile devices. This charger has two universal USB ports that will accept virtually any USB cord or device. A protective dust cap keeps out debris and moisture, and a protective coating safeguards the charger from harsh marine elements. A cut-out of 1 7/16-In. x 7/8-In. is required. This black, 2.4-amp charger requires 9V-33V DC input and produces 5V DC ± 5% output. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Twin universal USB ports can charge or power wide variety of devicesProtective dust cap keeps out debris and moistureRequires cut-out of 1 7/16-In. x 7/8-In.Black, 2.4-amp chargerRequires 9V-33V DC input; produces 5V DC ± 5% outputManufacturer part number 50-15069
Seachoice Dual Usb Charger, 12V, Accessory Socket Boat - A13-222Bps1-Bb3 - 50-14999F1
This Seachoice Dual USB Charger provides a pair of USB ports that can be used to conveniently charge or power a wide variety of devices, including all popular mobile devices. This charger has two universal USB ports that will accept virtually any USB cord or device. A protective dust cap keeps out debris and moisture, and a protective coating safeguards the charger from harsh marine elements. A cut-out with a 1 3/16-In. diameter is required. This black, 2.1-amp charger requires 9V-32V DC input and produces 5V DC ± 5% output. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Twin universal USB ports can charge or power wide variety of devicesProtective dust cap keeps out debris and moistureRequires cut-out of 1 3/16-In. diameterBlack, 2.1-amp chargerRequires 9V-32V DC input; produces 5V DC ± 5% outputManufacturer part number 50-14999
Seachoice Dual Trumpet Electric Horn, Stainless Steel, 123 Db Rating, 24V, 5 Max Amps. 18-1/2 In. L X 8 In. W X 5 In. H - 50-14631 - 50-14631F1
This Seachoice Dual Trumpet Horn provides a boat with a classic nautical look, and it delivers an impressive sound output of 123 dB. Its entire exterior is corrosion-resistant Stainless Steel that will retain its appealing finish and deliver reliable performance in boating environments. It has Type 304 stainless steel diaphragms and the mounting screws are also stainless steel. This stylish Dual Trumpet Electric Horn comes with a laminated horn signal card, and it has a dB(A) rating of 123 at one meter. This 24-volt (5 max amps) horn measures 18.5-In. L x 8-In. W x 5-In. H, and it is backed by a 5-year warranty. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Classic dual trumpet horn style is complemented by bright, durable stainless steel exterior finishHas Type 304 stainless steel diaphragms and stainless steel mounting screwsComes with laminated horn signal cardHas dB(A) rating of 123 at one meter24-volt (5 max amps) horn measures 18.5-In. L x 8-In. W x 5-In. H; backed by a 5-year warranty
Seachoice Dual Battery Tray With Poly Strap, Group 27 - 22046 - 50-22046F1
The Seachoice Dual Battery Tray is the perfect replacement for your old or cracked battery tray. It holds 2 group 27 deep-cycle marine batteries and includes a poly strap with quick-release buckle. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Perfect replacement for your old or cracked battery trayHolds 2 group 27 deep-cycle marine batteriesIncludes poly strap with quick-release buckleTough, durable build quality for a longer lifeMeets all NMMA requirements14-1/8 in. L x 12-3/8 in. W x 1-1/8 in. H
