Shields Hose
Shields 3370565 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 25' - 16-337-0565 - 88-3370565F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370563 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 10' - 16-337-0563 - 88-3370563F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370560 Silverado 4000 Type B1-15 Outboard Fuel Line, 5/16" X 250' - 16-337-0560S - 88-3370560F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370386 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 50' - 16-337-0386 - 88-3370386F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370385 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 25' - 16-337-0385 - 88-3370385F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370383 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 10' - 16-337-0383 - 88-3370383F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370380 Silverado 4000 Type B1-15 Outboard Fuel Line, 3/8" X 250' - 16-337-0380S - 88-3370380F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370146 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 50' - 16-337-0146 - 88-3370146F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 3370143 Silverado 4000 Type B1-15 Outboard Fuel Line, 1/4" X 10' - 16-337-0143 - 88-3370143F1
Silverado 4000 Outboard Fuel Line is resistant to ethanol blended fuels. This hose is EPA and CARB compliant. THV barrier layer to prevent permeation,polyester reinforcement for strength and a weather and UV resistant CPE cover. The gray color keeps hose cooler and helps prevent vapor lock. This hose is for above deck primer bulb applications, and is not fire retardant. Meets SAE J1527 Type B1-15.WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.
Shields 2548004 Exoflex Water/Exhaust Hose, 8" X 12-1/2' - 16-254-8004 - 88-2548004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2548001 Exoflex Water/Exhaust Hose, 8" X 6-1/4' - 16-254-8001 - 88-2548001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2546004 Exoflex Water/Exhaust Hose, 6" X 12-1/2' - 16-254-6004 - 88-2546004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2545004 Exoflex Water/Exhaust Hose, 5" X 12-1/2' - 16-254-5004 - 88-2545004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2545001 Exoflex Water/Exhaust Hose, 5" X 6-1/4' - 16-254-5001 - 88-2545001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544124 Exoflex Water/Exhaust Hose, 4-1/2" X 12-1/2' - 16-254-4124 - 88-2544124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544121 Exoflex Water/Exhaust Hose, 4-1/2" X 6-1/4' - 16-254-4121 - 88-2544121F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544004 Exoflex Water/Exhaust Hose, 4" X 12-1/2' - 16-254-4004 - 88-2544004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2544001 Exoflex Water/Exhaust Hose, 4" X 6-1/4' - 16-254-4001 - 88-2544001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543124 Exoflex Water/Exhaust Hose, 3-1/2" X 12-1/2' - 16-254-3124 - 88-2543124F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543121 Exoflex Water/Exhaust Hose, 3-1/2" X 6-1/4' - 16-254-3121 - 88-2543121F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543004 Exoflex Water/Exhaust Hose, 3" X 12-1/2' - 16-254-3004 - 88-2543004F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543001 Exoflex Water/Exhaust Hose, 3" X 6-1/4' - 16-254-3001 - 88-2543001F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2543000 Exoflex Water/Exhaust Hose, 3 X 50' - 16-254-3000S - 88-2543000F1
Suitable for delivery of cooling water and exhaust gas.SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID" radiusTighter corrugations to optimize the perfect clamp location
Shields 2542384 Exoflex Water/Exhaust Hose, 3-3/8" X 12-1/2' - 16-254-2384 - 88-2542384F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
Shields 2542144 Exoflex Water/Exhaust Hose, 2-1/4" X 12-1/2' - 16-254-2144 - 88-2542144F1
Suitable for delivery of cooling water and exhaust gas. SAE J2006 R2 LLOYD Registered Type ApprovedTemperature Range: -22°F to 212°F, Peak 239°FBlack synthetic rubber tube cover makes it resistant to heat, salt water, ozone, and abrasionReinforced with synthetic plies, steel wire helices make it strong and kink resistantVery flexible with a 1.5" x ID radiusTighter corrugations to optimize the perfect clamp location
