Shrinkwrap Accessories
P2B Blue Preservation Tape 2" X 36 Yds., 24/Case - P2B - 315-P2Bf1
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
Louver Vent, White - Blv1 - 315-Blv1F1
Simple installation.. just "press" it on. Special "high-tack" pressure sensitive adhesive liner - no special tools required. Guaranteed to stick to plastic, painted or metal surfaces. Strong bonding in all weather/wind conditions. Durable, all plastic construction (UV stabilized). Can be installed onto areas where water may "pond" (up to 1/3" deep) and maintain its water-tight seal.
Long Cuff Leather Safety Gloves - Ds-009 - 315-Ds009F1
Long cuff safety gloves designed to be used with heat tools. Long cuff protects wrists and clothing. Non-flammable, safe to use with open flame of heat tool.
Lift Off - Ds-Liftoff - 315-Liftofff1
Used to separate shrink wrap from the product it is covering. Using strapping, buckles and a tensioning tool the Liftoff offers simple protection. This separation promotes air circulation and is extremely important on painted hulls where shrink wrap touching paint can cause blistering. It is easily installed and re-usable.
End Caps-For Shrinkwrap Poles - Ds-Cap - 315-Dscapf1
For support poles. High density polythylene protective pad, designed to fit 2" x 4" boards to eliminate pole poke through.
Dssupercap Super Cap - Ds-Supercap - 315-Dssupercapf1
The Super Cap is designed to transfer the weight of snow, ice, and rain from the top of 2" x 4" support poles used under shrink wrap storage covers. Dome shaped and 20" in diameter, the Super Cap rests on the woven cord strapping running both lengthwise and crosswise, thus minimizing support poles from poking through shrink wrap covers. Super Caps can be easily attached to wooden uprights with either a nail or staples.
Dsstrapdisp Strapping Dispenser Only - Ds-Strapdisp - 315-Dsstrapdispf1
Sleek, durable, and lightweight design. Compatible with 1/2" and 3/4" strapping rolls. Convenient carrying handle for mobile shrink wrappers.Strap sold separately.
Dsshfast9986 6' Extension For 998 Gun - Ds-Shfast998-6 - 315-Dsshfast9986F1
6' Extension for 998 Gun
Dsprotector Strap Protector - Ds-Protector - 315-Dsprotectorf1
The Protector is designed for two different applications. A method of keeping strapping from forming dents in vinyl upholstery on boats. Used as corner guards to keep shrink wrap and strapping from being cut on sharp edges. Notched on all four sides for easy attachment to strapping. Strapping is kept from pressing on vinyl marine upholstery which can leave permanent depressions in the material.
Ds72W Access Door 36" X 72", White - Ds72W - 315-Ds72Wf1
Features zipper closure.
Ds72 Access Door 36" X 72", Clear - Ds72 - 315-Ds72F1
Features zipper closure.
Ds48W Access Door 36" X 48", White - Ds48W - 315-Ds48Wf1
Features zipper closure.
Ds48B Access Door 36" X 48", Blue - Ds48B - 315-Ds48Bf1
Features zipper closure.
Ds48 Access Door 36" X 48", Clear - Ds48 - 315-Ds48F1
Features zipper closure.
Ds36W Access Door 30" X 36", White - Ds36W - 315-Ds36Wf1
Features zipper closure.
Ds36B Access Door 30" X 36", Blue - Ds36B - 315-Ds36Bf1
Features zipper closure.
Ds36 Access Door 30" X 36", Clear - Ds36 - 315-Ds36F1
Features zipper closure.
Ds007 Professional Film Cutting Knife - Ds-007 - 315-Ds007F1
Hooked ends for safe cutting.Color may vary.
Bubble Wrap Tape 6" X 250' - 2930859 - 315-Pbwtf1
Bsv1 Stick-On Vent - Bsv-1 - 315-Bsv1F1
Simple "Stick-On" installation. No special tools required.
Bottom Cap - Ds-Bcap - 315-Dsbcapf1
For support poles. High density polythylene protective pad, designed to fit 2" x 4" boards to eliminate pole poke through. The Bottom Cap is smaller and more skid proof with flexible plastic - this upgraded material offers less scratching and better stability by reducing movement of the support post.
6 X 600' Anti-Chafe Tape - 1515P-Bw6-600 - 315-Bw6600F1
A high performance polyethylene film with a "light tack" adhesive providing a tough, puncture resistant barrier preventing scratching or chafing. This tape is designed to leave no residue while providing a UV protected surface between the shrink wrap and the covered object. APPLICATIONS: Anti chafe tape is applied to surfaces under the shrink wrap. It is not a heat shrinkable product.
4" x 108' White Heat Shrink Tape - P4W
Contains UV inhibitors for long term storage. Will not leave residue if applied to fiberglass, paint etc.
3/4" X 2100' Woven Strapping - 315-15087
Used with uprights and buckles to form the support structure under shrinkwrap covers.
3/4" Metal Buckles (100/Bag) - Pacb634 - 315-Pacb634F1
For use with strapping and tensioning tool.
