Taco Metals
Taco Metals F160861Pol1 Stainless Steel Muti Purpose 15° Portable Cleat - F16-0861Pol-1 - 236-F160861Pol1F1
TACO Marine's multipurpose cleat allows a boater the ease of an instant cleat in the location of a rod holder but also allows the boater to add a boat fender to the same cleat as well as many other uses. Not intended for permanent docking and is Intended for open bottom gunnel rod holders Manufactured from Stainless Steel Type-304Large S-shape 9" cleat designAccommodates up to 3/4" dock line for larger boat applications1-1/2" Diameter pipe fits into standard 1-5/8" rod holdersLoop hole design to hang fenders and allows multiple applicationsIncludes a mesh bag
Taco Metals F16-0810-1 "Come On Board" Boarding Angled Handle - F16-0810-1 - 236-F1608101F1
TACO Marine's boarding handle is ideal for boats on the water where constant boarding is necessary with a large grabbing surface for comfort grip. The finger molded handle pipe design assures a more secure and comfortable grip. A two piece fixed mount design for easy storage. Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat. Stainless Steel Type-304Unique finger molded groove handle design for comfort grip1-1/2" Diameter tube fits into standard 1-5/8" rod holdersMultiple piece design for easy storage
Taco Metals F16-0800-1 "Come On Board" Boarding Straight Handle - F16-0800-1 - 236-F1608001F1
TACO Marine's boarding handle is ideal for boats on the water where constant boarding is necessary with a large grabbing surface for comfort grip. The finger molded handle pipe design assures a more secure and comfortable grip. A two piece fixed mount design for easy storage. Packaged in mesh bag for easy drying if stored wet and to avoid scratching deck or storage surfaces on the boat. Stainless Steel Type-304Unique finger molded groove handle design for comfort grip1-1/2" Diameter tube fits into standard 1-5/8" rod holdersMultiple piece design for easy storage
Taco Metals F16-0151R-1 Fender Lock Receiver - F16-0151R-1 - 236-F160151R1F1
For dockside safety and convenience, TACO's fender lock ensures secure, quickly stored fender lines. The fender lock ensure that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders in their ideal position. Designed for simple single hand operationStainless Steel Type-316LOverall height above deck: 1.60"Drain plug: 1/4" NPT
Taco Metals F16-0151-1 Quick Release Fender Lock - F16-0151-1 - 236-F1601511F1
For dockside safety and convenience, TACO's fender lock ensures secure, quickly stored fender lines. The fender lock ensure that lines remain at the optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your boat is protected, with the fenders in their ideal position. Designed for simple single hand operationStainless Steel Type-316LOverall height above deck: 1.60"Drain plug: 1/4" NPT
Taco Metals Cok-0022-2 12" Shock Cord With Double Pulley - Cok-0022-2 - 236-Cok00222F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0021-2 12" Glass Eye With Shock Cord - Cok-0021-2 - 236-Cok00212F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0020-2 12" "Shock Cord With Single Pulley - Cok-0020-2 - 236-Cok00202F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0018-2 1-3/4" Cork- Outrigger Line Stops - Cok-0018-2 - 236-Cok00182F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0001T-2 Premium Outrigger Release Clip - Cok-0001T-2 - 236-Cok0001T2F1
Quality components to upgrade and repair outrigger rigging.
Taco Metals Cok-0001B-2 Standard Outrigger Release Clip - Cok-0001B-2 - 236-Cok0001B2F1
Quality components to upgrade and repair outrigger rigging.
Taco Gs960 Grand Slam 960 Electric Masthead Anchor Light, 3-Nm, 40.43" - Gs-960 - 236-Gs960F1
The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire inside the hardtop, which easily installs to the top's surface. The GS-960 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Certified for USCG-required 3-NMIncludes heavy-duty anodized aluminum tube, light and 6" lead of 20-gauge wire from the base5-Watt Stern Light and 10-watt AnchorLow-draw, 0.6 amps per lightElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descentNo under-mount clearance neededSmooth lift and descentHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on the stainless-steel breakaway pin allows for manual operation1-year limited warranty
Taco Gs9001 Grand Slam 900 Masthead Anchor Light, 39-1/2" - Gs-900-1 - 236-Gs9001F1
Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cut to lengthFour 3-watt LED Cree chipsWater-resistance IP66 ratingMachined / Anodized aluminum body with a light brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate
Taco Gs90 Grand Slam 900 Electric Masthead Anchor Light, 39-1/4" - Gs-950 - 236-Gs950F1
With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the GS-950 is certified for USCG-required 3 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Machined / Anodized aluminum bodyCertified for USCG-required 3-nmIncludes tube, light and 6" lead for 12-volt DC power supply for lightThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRemovable pin for manual adjustmentMounts to all hardtopsFour 3-watt LED Cree chips6-Watt Stern Light and 12-watt Anchor
Taco Gs860 Grand Slam 860 Electric Vhf Antenna Mount - Gs-860 - 236-Gs860F1
Polished stainless-steel body with a mirrored finishSmooth lift and descentStandard 1"-14 thread (male) shaft accommodates standard VHF antennas up to 8'No under-mount clearance neededHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on breakaway pin allows for manual operation in case of power failureElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descent1-year limited warranty
Taco Gs850 Grand Slam Electric Vhf Antenna Mount - Gs-850 - 236-Gs850F1
Designed with safety and innovation in mind, boaters can adjust the position of their antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Standard 1"-14 thread (male) shaft to accept standard antennas up to 8'No under-mount clearance requiredMachined / Anodized aluminum body with a light brushed finishThreaded shaft for consistent lift and descentDelrin bearings for smooth operationFeatures breakaway pin for manual adjustmentKit includes drill template and installation instructionsIncludes 6" lead for 12-volt DC power supply for lift and descentAccepts 7A fuse in the main +12 VDC power feed (not included)
Taco Gs8001 Grand Slam Universal Antenna Mount - Gs-800-1 - 236-Gs8001F1
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. Safe, no-hassle raising and lowering of a VHF antennaNo more climbing on T-tops or gunnelsStandard 1"-14 thread (male) shaft to accept standard VHF antennasMachined / Anodized aluminum bodyLight brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRoller bearings in crank assemblyMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate (hardware not included)Made in the USA1-year limited warranty
Taco Gs500 Pro Series Mount, 1 Pr. - Gs-500 - 236-Gs500F1
the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features patent-pending Twist & Lock pole connection. Eliminates the need for pins or bolts when securing outrigger poles. Mount is Ideal for boats from 32 to 50-plus feet. Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base and includes matching 6"x 8"x 1/2" thick oval backing plates. 3-year limited warranty.
Taco Gs390Xl Grand Slam 390Xl Outrigger Top Mount W/Crank, 1 Pr. - Gs390Xl - 236-Gs390Xlf1
Ideal for boats 25' - 50' with hardtops up to 4-1/2" thick. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 50'Safely control lift and rotation from under the topOffset handle for better hand clearancePairs with 1-1/2" TACO 18' deluxe aluminum and 16' and 20' carbon fiber tele-outriggers with locking pin
Taco Gs390 Grand Slam 390 Outrigger Top Mount W/Crank, 1 Pr. - Gs390 - 236-Gs390F1
This base is perfect for the bigger, faster center console boats between 25' and 40'. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 40'Safely control lift and rotation from under the topOffset handle for better hand clearancePairs with 1-1/2" TACO 18' deluxe aluminum and 16' and 20' carbon fiber tele-outriggers with locking pin
Taco Gs300 Grand Slam 300 Outrigger Mount, 1 Pr - Gs-300 - 236-Gs300F1
Ideal for boats 25' to 40'Constructed from stainless steel and aluminum (No plastic components)Arm lifts up to 46.5° from horizontal position for kite fishing and dock clearancePairs with 1-1/2" DIA Outrigger Poles up to 22'Can be used with Outrigger Base Reducer for 1-1/8" DIA polesErgonomic, single-hand crank handle with ball bearingUnique, locking flip handleAllow a controlled 180° rotation, if neededLocking head eliminates downward creep of outrigger polesIncludes mounting hardware for easy installation3-year limited warrant
Taco Grand Slam 312 Center Rigger Mount - Gs-312 - 236-Gs312F1
A center rigger mount designed for longer outrigger poles and for the offshore performance requirements of the large center console boats on the market today that are equipped with triple and quad engines. Increases the efficiency of deploying long baits when trolling offshore by using the innovative rotating lever handle to raise and lower the center rigger from under the hard top.Large gusset support for long runs at high speedsFixed position mount straight backFull function deployment without climbing on hard top, fly bridge or towerEasily raise and lower the center rigger while standing on the deckAccomodates up to 2 Hard TopsDesigned for 1-1/2" dia. polesStainless steel Type-316L arms and crank handles, anodized aluminum housing and rotator
Taco F389960 2-9/16" Suproflex Mounted Led Navigation Light Set - F38-9960 - 236-F389960F1
Designed specifically for SuproFlex. This sleek, low-profile navigation light fits V11-9960, V11-9990 and V11-9950 (OEM only) SuproFlex profiles, meets ABYC and USCG requirements for both sail and powerboat designation and has a water-resistant IP68 rating for hours of maintenance-free use. Ideal for boats up to 30'Sold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck spaceEasy to installProvides a 112.5-degree unobstructed view with less glareMeets ABYC/USCG requirements for both sail and powerboat designationLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationWater-resistant IP68 ratingUses #8 stainless steel fasteners, not included
Taco F386810B 4" Rub Rail Mounted Led Navigation Light Set - F38-6810B - 236-F386810Bf1
Sleek, low-profile lights designed to allow for cleaner, open decks with unobstructed view points. Very popular with bay boats, these easy-to-install lights meet ABYC and USCG requirements for both sail and powerboat designation, have a water-resistant IP68 rating and provide hours of maintenance-free, reliable use. Ideal for up to 30' boats and designed to fit the popular 3/4-inch insert profilesSold in pairs with one 3-watt port (red) light and one 2-watt starboard (green) lightBrightness compares to 10-watt incandescent lightEnables more deck space and easy to installProvides a 112.5° unobstructed view with less glareCertified for ABYC/USCG-approved 2 NMLow-voltage 12-14VDCAnodized aluminum heat sink for maximum heat dissipationLED lights are mounted in a heavy gauge polished stainless-steel joiner coverWater-resistant IP68 ratingRequires #8 stainless-steel fastener (not included)
Taco F313504Bsa1 4 Rod Transom Mount Rod Rack - F31-3504Bsa-1 - 236-F313504Bsa1F1
Brushed anodized aluminum Mounts to transom - maximize rod storageAdjust rack angle to fit any boat's transomEasy bolt-on installation
