Taylor
Taylor Removable Chafe Guard 16 Long" - Rcg1.14 - 32-Rcg114F1
Allows for easy adjustment regardless of the application. Ideal for anchor lines, power cords, and pre-spliced eyes. Polyester hook and loop fasteners provide easy and secure installation. When you can't use a permanant installation. Removable Chafe Guards are sold individually.
Taylor Recessed Wired Light Extension Pack - 46307 - 32-46307F1
Quickly add more lights to your recessed wired light set. This pack of three additional lights easily connects to your existing lights. You can add up to two extension packs, running a total of nine lights off one solar panel.
Taylor Ratcheting Fender Hanger - 1089 - 32-1089F1
Constructed from 3/4" polyester webbing with UV protection. This unique hanger allows you to adjust your fender height from 6" to 24". Simply loop the strap over any size rail or lifeline, feed the end of the strap through fender eye or tube and pull strap through buckle to desired length. Slide tab into release buckle until you reach the tightness around your rail or lifeline that you desire.
Taylor Rail/Lifeline Fender Bracket For 1/4" To 5/16" Rope (2 Per Pack) - 1097 - 32-1097F1
Double locking clamp design provides for a quick and easy fender height adjustment. Injection molded nylon clamp brackets mount securely to 7/8"-1" railings or up to 1/4" lifelines. Use on 1/4"-5/16" rope.
Taylor Rail Mount Fender Line Clips For 7/8" Rail (2 Per Pack) - 1093 - 32-1093F1
Injection molded polyethylene clips mount securely to your 7/8" railings. Used for hanging fenders, holding power cords, etc.
Taylor Rail Fender Hanger For Rails Up To 1" - 1108 - 32-1108F1
This unique design makes to easy to adjust fender heights and locks in place with a jam cleat-no knots. Uses 1/4" to 1/2" line and fits up to 1" rail.
Taylor Quick Knot Fender Hanger (4 Per Pack) - 1098 - 32-1098F1
This easy to use fender hanger allows the quick placement of fenders anywhere there is something to tie off to, without having to tie a knot. The rope is threaded through the quick knot's heavy duty molded nylon system, hanging the fender quickly and securely. No need to waste time with cumbersome and unsecured knots! Perfect for 1/4" rope.
Taylor Quick Disconnect Stainless Steel Pull Pin For Bimini Tops (Sold In Pairs) - 11227 - 32-11227F1
Replaces the screws in Taylor's #1204 deck hinge. Allows fast and easy mounting or removal of a bimini top. Comes complete with safety lanyard to prevent pin loss. Sold in pairs.
Taylor Pwc Fender, White - 1069 - 32-1069F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, Red - 1066 - 32-1066F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, Blue - 1075 - 32-1075F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pwc Fender, Black - 1062 - 32-1062F1
Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line.
Taylor Pvc Line Hanger 9-1/2" L - 1006 - 32-1006F1
Mounting band snaps on any rail, lifeline or stanchion. Snap bottom band around coil of rope, wire or electric cord.
Taylor Ptxss57Gy Sureshade Ptx Power Shade, 5' L X 57" W, Gray - - 32-Ptxss57Gyf1
The SureShade PTX Power Shade is a power driven shade system that can be easily installed on any boat under 26' with T-top tube or hardtop. The system deploys a shade 5' in 28 seconds and consists of two actuators powered by individual 12V DC motors. Universal design and slim 1-3/8" diameterOperates silently with an included rocker switch and requires no programmingDesigned with anti-racking and auto shut offStainless steel framework
Taylor Ptxss57Bk Sureshade Ptx Power Shade, 5' L X 57" W, Black - - 32-Ptxss57Bkf1
The SureShade PTX Power Shade is a power driven shade system that can be easily installed on any boat under 26' with T-top tube or hardtop. The system deploys a shade 5' in 28 seconds and consists of two actuators powered by individual 12V DC motors. Universal design and slim 1-3/8" diameterOperates silently with an included rocker switch and requires no programmingDesigned with anti-racking and auto shut offStainless steel framework
Taylor Premium Mooring Whips With Rocker Arm Base (Sold In Pairs) For Boats Up To 34'-46' - Pmw.1600 - 32-Pmw1600F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Premium mooring whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use and 1" diameter fiberglass poles. These are ideal for sailboats and larger, heavier or high profile boats in salt water areas and large tidal areas. Sold in pairs.
Taylor Premium Mooring Whips With Rocker Arm Base (Sold In Pairs) For Boats Up To 33' - Pmw.1400 - 32-Pmw1400F1
Mooring whips are a safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides and wakes. Mooring Whips are made of high quality, solid fiberglass poles, aluminum- magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation.Premium mooring whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use and 1" diameter fiberglass poles. These are ideal for sailboats and larger, heavier or high profile boats in salt water areas and large tidal areas. Sold in pairs.
Taylor Post Bumper 7" Diameter X 17" Long - 45660 - 32-45660F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45657 - 32-45657F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45653 - 32-45653F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45652 - 32-45652F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45607 - 32-45607F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45604 - 32-45604F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Post Bumper 7" Diameter X 17" Long - 45600 - 32-45600F1
Great protection for pipe supported type docks. Molded from marine grade vinyl with an inflation valve to adjust firmness. Slides over 1-1/2" dock pipe.
Taylor Pontoon Rail Fender Adjuster For Square Tube Rails (4 Per Pack) - 1139 - 32-1139F1
A fender adjuster designed specifically for the 1" square tube rails of pontoon boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Made from quality marine grade components -simple height adjustment for lines up to 1/2".
