Taylor
Taylor Carey Chen Offshore Fish Flag - 1929 - 32-1929F1
Authentic Carey Chen artwork is now available for tournament fishermen. These quality flags with vibrant colors are produced from UV stable inks on a 210D nylon flag that will hold up to the marine environment. The flag construction uses heavy duty tape with 100% brass grommets and 4-ply stitching on the fly end. Colors may vary.
Taylor Carey Chen Offshore Fish Flag - 1925 - 32-1925F1
Authentic Carey Chen artwork is now available for tournament fishermen. These quality flags with vibrant colors are produced from UV stable inks on a 210D nylon flag that will hold up to the marine environment. The flag construction uses heavy duty tape with 100% brass grommets and 4-ply stitching on the fly end. Colors may vary.
Taylor Carey Chen Offshore Fish Flag - 1923 - 32-1923F1
Authentic Carey Chen artwork is now available for tournament fishermen. These quality flags with vibrant colors are produced from UV stable inks on a 210D nylon flag that will hold up to the marine environment. The flag construction uses heavy duty tape with 100% brass grommets and 4-ply stitching on the fly end. Colors may vary.
Taylor Carey Chen Offshore Fish Flag - 1922 - 32-1922F1
Authentic Carey Chen artwork is now available for tournament fishermen. These quality flags with vibrant colors are produced from UV stable inks on a 210D nylon flag that will hold up to the marine environment. The flag construction uses heavy duty tape with 100% brass grommets and 4-ply stitching on the fly end. Colors may vary.
Taylor Buoy Hardware 1/2" Diameter Galvanized Rod With 4" Long Swivel - 33024 - 32-33024F1
1/2" diameter hot-dipped galvanized rod with 4" long swivel, 2 galvanized washers and nylon care lock nut.
Taylor Buoy Hardware 1/2" Diameter Galvanized Rod With 4" Long Swivel - 33018 - 32-33018F1
1/2" diameter hot-dipped galvanized rod with 4" long swivel, 2 galvanized washers and nylon care lock nut.
Taylor Buoy Hardware 1/2" Diameter Galvanized Rod With 4" Long Swivel - 33015 - 32-33015F1
1/2" diameter hot-dipped galvanized rod with 4" long swivel, 2 galvanized washers and nylon care lock nut.
Taylor Buoy Hardware 1/2" Diameter Galvanized Rod With 4" Long Swivel - 33012 - 32-33012F1
1/2" diameter hot-dipped galvanized rod with 4" long swivel, 2 galvanized washers and nylon care lock nut.
Taylor Boatguard Mooring Whips With Injection Molded Plastic Base (Sold In Pairs) - 99081 - 32-99081F1
An economical way to protect your boat in higher wake areas. Designed for fresh water use, low lake area and non-tidal regions. These new whips provide the "safety zone" between dock and boat for many types of docking applications. Large diameter solid fiberglass pole that withstand rugged environments and provide that spring action to keep your boat safely away from the dock. CAD designed whip base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Taylor Boatguard Mooring Whips With Injection Molded Plastic Base (Sold In Pairs) - 99080 - 32-99080F1
An economical way to protect your boat in higher wake areas. Designed for fresh water use, low lake area and non-tidal regions. These new whips provide the "safety zone" between dock and boat for many types of docking applications. Large diameter solid fiberglass pole that withstand rugged environments and provide that spring action to keep your boat safely away from the dock. CAD designed whip base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Taylor Boatguard Mooring Whips With Injection Molded Plastic Base (Sold In Pairs) - 99079 - 32-99079F1
An economical way to protect your boat in higher wake areas. Designed for fresh water use, low lake area and non-tidal regions. These new whips provide the "safety zone" between dock and boat for many types of docking applications. Large diameter solid fiberglass pole that withstand rugged environments and provide that spring action to keep your boat safely away from the dock. CAD designed whip base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Taylor Boat Vent Ii Boat Cover Venting And Support - 11982 - 32-11982F1
Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! Installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.
Taylor Boat Cover Support System Includes 50' Webbing, Quick Release Buckles And A Boat Cover Support Pole - 55741 - 32-55741F1
Helps extend the life of your boat cover by preventing water from pocketing. Includes 50' of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom.
Taylor Boat Cover Support Pole Base Pad (Pole Not Included) - 11976 - 32-11976F1
This new base is designed for use with all 7/8" diameter (bottom pole) support poles. The bottom pad is made from EPDM to provide additional friction to hold pole in place against the deck versus the traditional crutch tip design. In addition, the base pad has a swivel capability that allows the pole to be positioned at just the right angle for your application. Simply remove the bottom tip from your existing support pole and insert over adapter to secure. (Pole not included)
Taylor Boat Cover Snap Fasteners - 404 - 32-404F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 403 - 32-403F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 402 - 32-402F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Boat Cover Snap Fasteners - 401 - 32-401F1
Standard snap-on, snap-off design. Snaps on and off in any direction.
Taylor Black Thermoplastic Turn Latches With Self-Tapping Screws (2 Per Pack) - 1162 - 32-1162F1
Simple twist latch for walk-thru windshields or other hatch openings. Black thermoplastic with self-tap screws.
Taylor Black Thermoplastic Door Catches With Ball Stud, Catch And Screws (1 Set) - 1163 - 32-1163F1
For walk-thru windshields and other doors. Catch holds door firmly in place against vibration and motion. Constructed of black thermoplastic consisting of ball stud, catch and screws.
Taylor Bimini Hinge Thumb Screw With 1/4" X 1" Threads (Sold As Pair) - 11736 - 32-11736F1
Designed as a replacement for holding screws on stainless and zamak bimini deck hinges.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1638 - 32-1638F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1636 - 32-1636F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1634 - 32-1634F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
Taylor Anodized Aluminum Windshield Support Bar With Nylon Fittings - 1632 - 32-1632F1
Used as original equipment on many walk-thru windshields. Made from anodized aluminum tubing with nylon fittings. They allow for pivot in almost every direction for easy installation.
