Tiedown Engineering
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26397 - 241-26397F1
Commercial Grade. Should be used for all cross supports. Each leg 4"L x 8"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26392 - 241-26392F1
Commerical grade. Should be used for all cross supports. Each leg 2-3/4"L x 2-1/2"H.
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26380 - 241-26380F1
Commercial grade. Should be used for all cross supports. Each leg 4"L x 7"H".
Tie Down Engineering Dock Hardware - Angle Brackets/Clip - 26379 - 241-26379F1
Commercial grade. Should be used for all cross supports. Each leg 10"L x 3"H", 3 holes.
Tie Down Engineering Dock Hardware - 5" X 5" Back Up Plate, Commercial Grade - 26413 - 241-26413F1
Reinforcing plates are used to back up single T males and females. 5" x 5".
Tie Down Engineering Dock Hardware - 14" Steel Hoop Roller Pile Holder, Commercial Grade - 26423 - 241-26423F1
14" Commercial grade steel. The piling hoop secures around the piling, while roller permits smooth up and down movement.
Tie Down Engineering Dock Hardware - 14" Internal Pile Holder, Commercial Grade - 26434 - 241-26434F1
Commercial grade. Heavy duty 1/4" galvanized steel. Bolts to the dock directly. 4 Rollers allow it to move smoothly up and down the piling. Size: 24" x 24" x 7-15/16".
Tie Down Engineering Deluxe Anchor Kit Includes Anchor, Anchor Line, Chain And Shackles - 95096 - 241-95096F1
This anchor has the traditional holding power which has always been associated with Danforth® Standard® Anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long-lasting protection. Includes Danforth anchor, rope, stainless steel chain and shackles. Model S600 with 8 lb. Danforth® anchor for 17'-24' boats.
Tie Down Engineering Danforth Standard Anchor - 94016 - 241-94016F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 40S for 45' boat size.
Tie Down Engineering Danforth Standard Anchor - 94015 - 241-94015F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 22S for 40' boat size.
Tie Down Engineering Danforth Standard Anchor - 94014 - 241-94014F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 18S for 36' boat size.
Tie Down Engineering Danforth Standard Anchor - 94013 - 241-94013F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 13S for 31' boat size.
Tie Down Engineering Danforth Standard Anchor - 94012 - 241-94012F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 8S for 27' boat size.
Tie Down Engineering Danforth Standard Anchor - 94011 - 241-94011F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 4S for 17' boat size.
Tie Down Engineering Danforth Standard Anchor - 94010 - 241-94010F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 2-1/2S for 10' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94022 - 241-94022F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 35H for 64' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94021 - 241-94021F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 20H for 50' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94020 - 241-94020F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 12H for 42' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94019 - 241-94019F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 5H for 31' boat size.
Tie Down Engineering Bunk Slicks - Black - 86170 - 241-86170F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. Stainless mounting screws included.
Tie Down Engineering Bunk Slicks - Black - 86164 - 241-86164F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. 40 Stainless mounting screws included.
Tie Down Engineering Bow Safety Chain 3/16" X 15-1/2" - 81201 - 241-81201F1
Connects the boat to the bow stand of the trailer. 3/16" x 12 links.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81250 - 241-81250F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81220 - 241-81220F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81215 - 241-81215F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
