West Systems
Scarffer™ - 875 - 655-875F1
A unique tool for cutting accurate scarf joints in plywood up to 3/8" thick. Attaches easily to most circular saws and is simple to remove.
Roller Covers, 7" - 800-2 - 655-8002F1
Specially designed, high-density polyurethane foam rollers. Ideal for epoxy application. Can be cut into shorter lengths to match area.
Reusable Mixing Sticks (8/Pk) - 804-8 - 655-8048F1
Perfect for filleting or for scraping excess epoxy from surfaces. Reusable.
Reusable Mixing Sticks (60/Pk - 804-60 - 655-80460F1
Perfect for filleting or for scraping excess epoxy from surfaces. Reusable.
Resin & Hardener, 190 Ml. - C-610 - 655-C610F1
Combines the strength and reliability of a two-part WEST SYSTEM® Epoxy in a point-and-shoot package. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds to wood, metals, fiberglass and concrete. Six10 Thickened Epoxy Adhesive meters the proper ratio of epoxy resin and hardener from a multi-chambered tube that fits in any standard caulking gun. The pre-thickened components travel through a static mixer where they are fully blended before being dispensed in a smooth, workable bead. Six10's shear thinning properties make it "thinner" as it's worked. It can be easily tooled into a non-sagging fillet or used to wet out light to moderate reinforcing fabrics like fiberglass. The hardener provides a long open time but has fast thru-cure. Stays workable in the static mixer for 42 minutes, making it practical for long or complicated assemblies. Incudes one 600 Static Mixer.
Resin & Hardener Packets - 101-T - 655-101Tf1
101T: Includes Six 105 Resin/205 Fast Hardener packets only. Each pre-measured packet contains 16 grams of 105 Resin and 3.2 grams of 205 Fast hardener (19.2 grams or .56 fluid oz of mixed epoxy).
Release Fabric 60" X 10 Yds - 879-10 - 655-87910F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Release Fabric 60 X9 - 879-18 - 655-87918F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Release Fabric 60 X 2 Yd - 879-2 - 655-8792F1
Economical but tough, finely woven nylon fabric treated with a release agent. Used to separate the absorber, breather and vacuum bag from the laminate in vacuum bagging operations. Also used in hand lay-up applications to allow more squeegee pressure and protect the lay-up from contamination. Peels easily and leaves a smooth textured surface, ready for bonding or finishing. Not recommended for post-cure temps over 120°F .
Rebuild Kit For All Pumps - 306Kit - 655-306Kitf1
For metering larger quantities of 105 Resin and 205 or 206 (5:1 ratio) Hardeners. Reduces mixing time and waste on large projects. Carry handle allows you to move the pump where the work is. Reservoirs hold one gallon of resin, one quart of hardener. Dispenses approximately 0.5 fl oz of resin/hardener per pump stroke (about 1 qt per minute). Can be converted to a 3:1 ratio.Rebuild Kit (306KIT): Includes: seals, balls, gaskets, springs, high-rise tubes with ferrules, new resin and hardener reservoirs with lids.
Pro-Set Resin Adhesive 4.5 Gal Pmg - 1752 - 655-1752F1
Plastic Spreaders, 2/Pk - 808-2 - 655-8082F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
Plastic Spreaders, 12/Pk - 808-12 - 655-80812F1
Lightweight and reusable. For fairing and filling applications.Double edged. 3-1/2" x 6".
Mini Pump Set 300 For Group A, B, Or C - 300 - 655-300F1
The 300 Mini Pump Set, containing three pumps-the 105 Resin pump, a 205/206 Hardener pump (5:1 ratio), and a 207/209 Hardener pump (3:1 ratio). Designed for convenient and accurate metering of group size A, B and C. As packaged, the pumps are ready to go into the Group Size B containers. A package of extension tubes for Group Size A containers is included with the set. Group Size C extension tubes are included in the 105-C Resin and in the 207-SC or 209-SC packages. Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio verification and operating instructions that come with the pumps.
Microlight Filler - 5 Oz. - C-410-7 - 655-C4107F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 5 Oz. - 410-7 - 655-4107F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 4 Lb - C-410-B - 655-C410Bf1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 4 Lb - 410-B - 655-410Bf1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 2 Oz. - C-410-2 - 655-C4102F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Microlight Filler - 2 Oz. - 410-2 - 655-4102F1
Ideal low-density filler for creating light, easily-worked fairing compound especially suited for fairing large areas. Handles well and mixes with greater ease than 407 Low-Density filler or microballoons. Approximately 30% easier to sand. More economical for large fairing jobs. Cures to Light Tan color.
Low Density Filler - 4 Oz. - C-407-5 - 655-C4075F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 4 Oz. - 4075 - 655-4075F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 14 Lb - 407-B - 655-407Bf1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
Low Density Filler - 12 Oz. - 407-15 - 655-40715F1
A blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark Red/Brown color.
High-Density Filler-15.2 Oz. - 404-15 - 655-40415F1
A thickening additive developed for maximum physical properties in hardware bonding where high cyclic loads are anticipated. It can also be used for filleting and gap filling where maximum strength is necessary. Cures to an Off-White color.
