Attwood Marine
Attwood Universal Fuel Connector 90 Degree Male Elbow 1/4" Npt - 2552103 - 23-88876F1
Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use teflon tape on all threads.
Attwood Twist On Hose Flange For 3" Hose, Black - 1405-3 - 23-14053F1
For 3" I.D. hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with four mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed.
Attwood Transducer Mounting Plate And Hardware - 94110-5 - 23-941105F1
For easy mounting, addition and replacement of transducers Marine grade polymer will not warp, corrode or be affected by UV raysMounts easily with two screws
Attwood Trailer Tongue Lift Handle - 11130-7 - 23-111307F1
Convenient handle for maneuvering trailer tongue. Mounts easily to most trailer couplers.
Attwood Trailer Guide Lights (Sold As Pair) - 14066-7 - 23-140667F1
Trailer guide lights aid in backing and maneuvering trailers at boat ramps and in tight areas. Waterproof, bright red LED lights make it easy to identify trailer angle and position, even in low light conditions. Mount to trailer frame or guidepost with corrosion-resistant aluminum and steel mounting. NOTE: Mounting hardware not included.
Attwood Toggle On/Off/On Switch, Metal Handle - 14255-3 - 23-142553F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Toggle On/Off Switch, Metal Handle - 14253-3 - 23-142533F1
These metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-volts DC only. Plastic body and housing with metal toggle and ring. Not external ignition protected. Single-pole, double-throw contacts. For bilge pump, speed selector, or light that requires two power settings.
Attwood Thru Hull Stainless Steel 5/8" For Hose, Short - 66540-3 - 23-665403F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 5/8" For Hose - 66546-3 - 23-665463F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose, Short - 66541-3 - 23-665413F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 3/4" For Hose - 66547-3 - 23-665473F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose, Short - 66542-3 - 23-665423F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1" For Hose - 66548-3 - 23-665483F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose, Short - 66543-3 - 23-665433F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/8" For Hose - 66549-3 - 23-665493F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose, Short - 66544-3 - 23-665443F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/4" For Hose - 66550-3 - 23-665503F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose, Short - 66545-3 - 23-665453F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Stainless Steel 1-1/2" For Hose - 66551-3 - 23-665513F1
Cast from 316 stainless steel. A channel under the flange holds a bead of sealant. All models have wrench flats or an end notch. Designed for installation above the water line only.
Attwood Thru Hull Scupper For Hose, White - 1-1/2" - 723548 - 23-38811F1
The popular 3876 scupper mounted to a 3875B 1-1/2" thru-hull as a complete assembly. Made of high-impact corrosion resistant white plastic with flapper valve that opens outward to dump water overboard and closes to help prevent backwash from entering cockpit. Installation hole size is 2".
Attwood Thru Hull Connector For Hose, White, 90 Degree - 3/4" - 722146 - 23-38773F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 5/8" - 720320 - 23-38723F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 729086 - 23-38963F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 3/4" - 720685 - 23-38733F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
Attwood Thru Hull Connector For Hose, White - 1-1/8" To 1-1/4" - 721050 - 23-38743F1
Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White.
