Airmar

B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 12° Tilted Element - Requires Mix & Match Cable 12° tilted version for 8 to 15° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-m... More Details

B164 Bronze Thru-Hull - 50/200 kHz - 1 kW - 0° Tilted Element - Requires Mix & Match Cable 0° tilted version for 0 to 7° hull deadrise angles. Step up to a 1 kW—without a fairing! The 1 kW, flush-moun... More Details

B164 1kW 20° Thru-Hull Transducer with Blue Connector Step up to a 1kW - Without a Fairing!Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilt... More Details

B164 1kW 20 Degree Tilted Element 8-Pin for Garmin Step up to a 1 kW—without a fairing! The 1 kW, flush-mount, Tilted Element™ transducer is perfect for fast, trailered vessels that cannot accommodate... More Details

B164 1kW 0° Thru-Hull Transducer with Blue Connector The B164 is a 1kW bronze low-profile transducer with a fast-response temperature sensor. The transducer is ideal for fast, trailered, tournament, s... More Details

B150M Bronze 20 Degree Thru-Hull 300W 8-Pin As CHIRP continues to redefine recreational fishing, AIRMAR has expanded its lineup of broadband transducers to satisfy the growing demand for this game-cha... More Details

B150 12 Degree Tilt Medium CHIRP 300W 8-Pin for Garmin As CHIRP continues to redefine recreational fishing, Airmar has expanded its lineup of broadband transducers to satisfy the growing demand for th... More Details

B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housin... More Details

B117 Bronze Thru-Hull Transducer w/Humminbird #9 Plug - 7-Pin The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes drag ... More Details

B117 Bronze 0° Depth & Temp with Ray Connector for CP370 & DSM300 The B117 features our 50/200 kHz, dual-frequency, single ceramic element in a low-profile housing. The nearly-flush design minimizes d... More Details

B117 50/200kHz 600W Mix & Match 0° Deadrise Airmar’s entry-level B117 features a single, 50/200 kHz, dual-frequency, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes ... More Details

75WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 75W... More Details

75WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details

75WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench. For use ... More Details

75WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details

6M Extension Cable for Mix & Match Chirp Transducers - 12-Pin  Connects to Airmar's Mix & Match 12-Pin chirp transducer; then add your Mix & Match Sonar Cable. More Details

60WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. Use wrench 60W... More Details

60WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. W... More Details

60WR-2 Transducer Hull Nut Wrench A single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench. For u... More Details

60WR-1 Crows Foot Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wren... More Details

Low/High Frequency - In-Hull Chirp Transducer without Connector Rely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or... More Details

3M Extension Cable for Mix & Match Chirp Transducers - 12-Pin  Connects to Airmar's Mix & Match 12-Pin chirp transducer; then add your Mix & Match Sonar Cable. More Details

200WX WeatherStation® Instrument - Land-based, Mobile, Standalone ** This unit requires the purchase of a cable, cable is not included with antenna ** The WeatherStation 200WX is the best choice for m... More Details

175WR-4 Transducer Housing Wrench A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164... More Details

164WR-3 Double Handle Transducer Wrench Transducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. ... More Details