Seachoice
Seachoice 28003 Adjustable Transom Saver, 34" - 46" - 50-28803 - 50-28003F1
Aluminum constructionUniversal mountAdjustable from 34" to 46"Includes: Clevis pin, over-the-roller bracket, wing and bolt on brackets and two rubber straps
Seachoice 28004 Adjustable Angled Transom Saver, 28" - 59" - 50-28004 - 50-28004F1
Corrosion-resistant steelUniversal designAdjustable from 28" to 59"Includes: Mounting hardware, rubber V block, bungee cord and instructions
Seachoice 28006 Replacement Transom Saver Rubber V-Block - 50-28006 - 50-28006F1
Replacement V-block for transom saver.
Seachoice 28011 Outboard Hydraulic Steering Lock - 28011 - 50-28011F1
Attaches to outboard steering cylinders for trailering-reduces pressure on cylinder Attaches to outboard steering cylinders for trailering-reduces pressure on cylinderAttached cord for easy removal and storage of clipsClips are made of thermoplastic rubberHigh visible color acts as a reminder to remove before use
Seachoice 28423 Hydraulic Steering Fluid - Synthetic Blend, Iso 15, 1 Qt. - 28423 - 50-28423F1
Seachoice Hydraulic Steering Fluid is engineered to ensure optimum performance for marine hydraulic steering systems. It provides outstanding antioxidant performance in ASTM D2272 testing, as well as superior anti-wear and anti-corrosion capabilities. It can be safely used in all hydraulic applications recommending an ISO 15 fluid. ISO 15Synthetic blendAnti-corrosion & anti-wearFor all marine hydraulic steering systems, including Evinrude G2Can be used to top off fluids or as a flush and fill
Seachoice 28429 Fill/Bleed Hose Kit - 28429 - 50-28429F1
Use with all inboard, outboard and inboard/outboard helm units for bleeding system. Kit includes: hose, screw cap (cap fits Seachoice item: 28423 Hydraulic Steering Fluid bottle and most hydraulic oil bottles) and push pin for venting/resealing bottle.
Seachoice 28691 Propeller Hub Kit, Mercury®/Mariner® 46-60 Hp Ct/Bigfoot, Verado® 72-300 Hp, Force® 90-120 Hp, Mercruiser® Alpha & Bravo One Stern Drives (< 400 Hp) - 50-28691 - 50-28691F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, aft adapter, forward thrust washer, prop nut and tab washer
Seachoice 28693 Propeller Hub Kit, Yamaha® Outboards & Stern Drives With V-4 & V-6 Gear Case © 1980 & Newer - 50-28693 - 50-28693F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and spacer
Seachoice 28694 Propeller Hub Kit,Honda® Outboards 75-90 Hp - 1999 & Newer, 115-130 Hp - 50-28694 - 50-28694F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28696 Propeller Hub Kit, Suzuki® 150-300 Hp 4-Stroke & 150-225 Hp 2-Stroke Outboards - 50-28696 - 50-28696F1
Allows installation of aluminum propellers on popular outboards and stern drives. Includes (l to r): Plastic drive sleeve, cotter pin, aft adapter, forward thrust washer, prop nut and washer
Seachoice 28701 3-Blade Aluminum Propeller, 15" Pitch, 15-1/4" Dia., Rh Rotation - 50-28701 - 50-28701F1
Seachoice 28701 3-Blade Aluminum Propeller is an excellent performance and value in a replacement propeller for most stern drives and outboards (90hp - 350hp / 4.75" Gear case). Made with a special low-copper alloy for excellent toughness and corrosion resistance. Die-case contrucion allows for uniform blade positioning and durable powder coating contributes to a smoother, longer lasting product. Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28703 3-Blade Aluminum Propeller, 17" Pitch, 15" Dia., Rh Rotation - 28703 - 50-28703F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28705 3-Blade Aluminum Propeller, 19" Pitch, 14-1/2" Dia., Rh Rotation - 28705 - 50-28705F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28707 3-Blade Aluminum Propeller, 21" Pitch, 14-1/2" Dia., Rh Rotation - 28707 - 50-28707F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product90hp - 350hp / 4.75" Gear case
Seachoice 28711 3-Blade Aluminum Propeller, 13" Pitch, 14" Dia., Rh Rotation - 28711 - 50-28711F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28713 3-Blade Aluminum Propeller, 15" Pitch, 13-3/4" Dia., Rh Rotation - 28713 - 50-28713F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28715 3-Blade Aluminum Propeller, 17" Pitch, 13-1/4" Dia., Rh Rotation - 28715 - 50-28715F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28717 3-Blade Aluminum Propeller, 19" Pitch, 13" Dia., Rh Rotation - 28717 - 50-28717F1
Excellent performance and value in a replacement propellerAvailable for most stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting product40hp - 150hp / 4.25" Gear case
Seachoice 28721 4-Blade Aluminum Propeller, 14" Pitch, 14" Dia., Rh Rotation - 28721 - 50-28721F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28723 4-Blade Aluminum Propeller, 17" Pitch, 14" Dia., Rh Rotation - 28723 - 50-28723F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 28725 4-Blade Aluminum Propeller, 19" Pitch, 14" Dia., Rh Rotation - 28725 - 50-28725F1
Combines 3-blade speed with superior handlingHigh-rake angle for improved accelerationRecommended for 135 HP and up stern drives and outboardsSpecial low-copper alloy for excellent toughness and corrosion resistanceUniform blade positioning due to die-cast constructionDurable powder coating contributes to a smoother, longer lasting productStern drives / 135hp+ O/Bs
Seachoice 29401 Stainless Steel Hollow Back Rub Rail, 3/4"W X 12' L, .062 Ga. - 29401 - 50-29401F1
316 Stainless steel offers excellent corrosion resistancePolished finishDrilled and countersunk on 6" centers
Seachoice 29403 Stainless Steel Hollow Back Rub Rail, 1"W X 12' L, .077 Ga. - 29403 - 50-29403F1
316 Stainless steel offers excellent corrosion resistancePolished finishDrilled and countersunk on 6" centers
Seachoice 29404 Stainless Steel Hollow Back Rub Rail, 1-1/4"W X 12' L, .077 Ga. - 29404 - 50-29404F1
316 Stainless steel offers excellent corrosion resistancePolished finishDrilled and countersunk on 6" centers
Seachoice 3 In. Brass Drain Tube, 1 In. Diameter - 19071 - 50-19071F1
Designed to be installed in a transom, splashwell, livewell or baitwell, this drain tube with .035 inch wall has a 1 inch inside diameter and 1-7/8 inch overall length. Fabricated from corrosion resistant brass for lasting durability. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Drain tube designed for transom, splashwell, livewell or baitwell installationFabricated from corrosion resistant brass for lasting durabilityInside Diameter: 1 inchLength: 3 inchProtective clear package for easy visibility and applicationManufacturer part number 50-19071
Seachoice 3 In. Brass Drain Tube, 1.25 In. Diameter - 19091 - 50-19091F1
Designed to be installed in a transom, splashwell, livewell or baitwell, this drain tube with .035 inch wall has a 1-1/4 inch inside diameter and 3 inch overall length. Fabricated from corrosion resistant brass for lasting durability. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Drain tube designed for transom, splashwell, livewell or baitwell installationFabricated from corrosion resistant brass for lasting durabilityInside Diameter: 1-1/4 inchLength: 3 inchProtective clear package for easy visibility and applicationManufacturer part number 50-19091
Seachoice 3 Position Push Pull Switch Off/On#1/On#2 - 11921 - 50-11921F1
Heavy Duty. AMounting stem: 1-1/4" L x 3/8" dia. 3 Position: Off - On #1 - On #2. Two separate circuits. Suited for anchor lights and a separate circuit for running lights. Brass hex back-up nut, brass washer. Chrome plated plastic knob.
Seachoice 3 Spoke Stainless Steel Steering Wheel W/Turning Knob - 28611 - 50-28611F1
304 Stainless steel steering wheelFits standard 3/4" tapered steering shaftsStainless steel center cap includedFinger grip and large turning knob
Seachoice 3-Position Boat Toggle Switch, Momentary On/Off/Momentary On - 12161 - 50-12161F1
Mounting Stem Length: 15/32 inch Single pole, single throw momentary on/off/momentary on toggle switch is suitable for many general applicationsInclusive of a chrome plated brass handle, mounting stem and face nutTerminals: 3 screwMax panel thickness: 3/8 inchMounting Stem Length: 15/32 inchManufacturer part number 50-12161
Seachoice 3-Position Boat Toggle Switch, On/Off/On - 12121 - 50-12121F1
Mounting Stem Length: 15/32 inch Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumpsInclusive of a chrome plated brass handle, mounting stem and face nutTerminals: 3 screwMax panel thickness: 3/8 inchMounting Stem Length: 15/32 inchManufacturer part number 50-12121
Seachoice 3-Position Heavy Duty Toggle Switch, On/Off/On - 12141 - 50-12141F1
Seachoice Toggle Switches feature a chrome-plated brass handle, mounting stem, and face nut, making them perfect for marine electrical applications. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Heavy-duty, double-pole double-throw toggle switch ideal for marine applicationsNon-corrosive construction throughout; durable, moisture-repellent plastic housing6 screw-type terminals25 amps @ 12V DC; 10 amps @ 250V AC; 20 amps @ 125V ACFits panels up to 3/8 inch thickMounting stems are 15/32 inches long; 15/32 inch-32 thread diameterManufacturer part number 50-12141
Seachoice 3-Position Push-Pull Switch - 11941 - 50-11941F1
Seachoice Push-Pull Switches are made with marine-grade materials that resist corrosion. This 3-position switch is normally off. The first "On" energizes the first circuit; the second "On" energizes both circuits. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Normally off, 3-position push-pull switch with a variety of connections when pulledFirst "On" energizes 1 circuit; second "On" energizes both circuitsCorrosion resistant construction excellent for marine applications; brass hex back-up nut, brass washer, chrome-plated plastic face nut, chrome-plated plastic knobRated 25 amps @ 6V DC; 15 amps @ 12V DCFits panels up to 1 inch thickManufacturer part number 50-11941
Seachoice 3-Position Toggle Switch, Momentary On/Off/Momentary On - 12031 - 50-12031F1
Max Panel Thickness: 1/4 inch Three-position momentary on/off/momentary on toggle switchIdeal for operating trim tabsSealed to resist water penetrationTerminals: 6Max Panel Thickness: 1/4 inchManufacturer part number 50-12031
Seachoice 3-Position Toggle Switch, On/Off/On - 12021 - 50-12021F1
With a black plastic paddle and locking ring with lever seal and knurled cap nut, this three-position toggle switch is suitable for many general applications including operation of running and anchor lights, bilge pumps, blowers, baitwell pumps and more. Sealed construction resists water penetration. Requires 15/32 inch mounting hole. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters offering a wide-ranging product line while remaining affordable. Three-position on/off/on toggle switchSuitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and moreTerminals: 6Max Panel Thickness: 1/4 inchManufacturer part number 50-12021
Seachoice 3-Strand Twisted Nylon Dock Line, White, 3/4" X 25' - 42631 - 50-42631F1
Extremely strong rope with 24" eye splice. Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and marine growth. Clamshell packed. 100% NylonAbsorbs sudden shock loadsCan be stored wet, won't rotStays flexible throughout its lifeResistant to abrasion, oil, grease, gasoline, mildew and most chemicals24" Eye splice (one end)
Seachoice 3-Strand Twisted Nylon Dock Line, White, 3/4" X 35' - 42641 - 50-42641F1
Extremely strong rope with 24" eye splice. Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and marine growth. Clamshell packed. 100% NylonAbsorbs sudden shock loadsCan be stored wet, won't rotStays flexible throughout its lifeResistant to abrasion, oil, grease, gasoline, mildew and most chemicals24" Eye splice (one end)
Seachoice 3-Strand Twisted Nylon Dock Line, White, 3/4" X 50' - 42651 - 50-42651F1
Extremely strong rope with 24" eye splice. Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and marine growth. Clamshell packed. 100% NylonAbsorbs sudden shock loadsCan be stored wet, won't rotStays flexible throughout its lifeResistant to abrasion, oil, grease, gasoline, mildew and most chemicals24" Eye splice (one end)
Seachoice 3-Strand Twisted Nylon Dock Line, White, 3/8" X 10' - 42501 - 50-42501F1
Extremely strong rope with 10" eye splice. Designed to absorb sudden shock loads. Very good resistance to abrasion, rot, oils, gasoline and marine growth. Clamshell packed. 100% NylonAbsorbs sudden shock loadsCan be stored wet, won't rotStays flexible throughout its lifeResistant to abrasion, oil, grease, gasoline, mildew and most chemicals10" Eye splice (one end)
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60331 - 50-60331F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60341 - 50-60341F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60351 - 50-60351F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60361 - 50-60361F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60371 - 50-60371F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60441 - 50-60441F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60451 - 50-60451F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60461 - 50-60461F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60471 - 50-60471F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 60481 - 50-60481F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61501 - 50-61501F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61511 - 50-61511F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61521 - 50-61521F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61531 - 50-61531F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 61541 - 50-61541F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62601 - 50-62601F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62611 - 50-62611F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant - 62621 - 50-62621F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/4" X 3" Assorted Colors (4 Per Pack) - 62221 - 50-62221F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature.Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant 3/8" X 3", Assorted Colors (5 Per Pack) - 62191 - 50-62191F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Colors
Seachoice 3-To-1 Heat Shrink Tubing With Sealant, Black With Assorted Sizes 1/8" To 1/2" X 3" (5 Per Pack) - 62201 - 50-62201F1
Marine grade, flexible polyolefin heat shrinkable tubing. 3:1 shrink ratio with adhesive liner. Flame retardant. Once installed, provides a complete environmental seal to prevent corrosion, enhance insulation and improve abrasion resistance. - 55°C to 110°C operating temperature. Pack of assorted Sizes
Seachoice 3-Way Y Fitting, Fits 3/4 In. Id Hose, Black Plastic - 18231 - 50-18231F1
The Seachoice 3-Way "Y" Fitting is perfect for plumbing hard-to-reach areas. Featuring barbed connectors for a secure hold, this fitting is fabricated from rust-free black plastic. Seachoice is committed to delivering quality marine accessories and OEM replacement parts to satisfy fishing, boating and watersports enthusiasts worldwide. Seachoice is run for and by boaters, offering a wide-ranging product line while remaining affordable. Perfect for plumbing hard-to-reach areasBarbed connectors for a secure hold3-way "Y" fitting designFits 3/4 inch inner diameter (ID) hoseFabricated from rust-free black plasticManufacturer part number 50-18231
Seachoice 3" Swivel Eye Bolt Snap - 36491 - 50-36491F1
Swivel Eye Bolt Snap, Chrome/Brass
Seachoice 3" Swivel Eye Bolt Snap - 36521 - 50-36521F1
Swivel Eye Bolt Snap, 316 Stainless
Seachoice 3" Transom Light With Stainless Steel Flange - 5391 - 50-05391F1
12 point 135°. Flange made of 304 polished stainless steel with clear plastic lens. Supplied with rubber mounting pad. 3" diameter, 1-3/4" deep. Use #8 screws.
Seachoice 3/4" Clevis Pin - 20216025 - 50-53291F1
Corrosion resistant plating.
Seachoice 3/8" Clevis Pin - 20216001 - 50-53261 Superseded By: 50-53263F1
Corrosion resistant plating.
Seachoice 30 Degree Plastic Rod Holder With Etched Finish On Flange - Black - 50-89271 - 50-89271F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 30 Degree Plastic Rod Holder With Injection Molded Abs Flange - White - 50-89251 - 50-89251F1
Molded high impact plastic. Etched finish on flange. One-piece construction. Non-corrosive. Uses (3) fasteners #12 for installation.
Seachoice 30 Degree Plastic Rod Holder With Stainless Steel Flange - 89221 - 50-89221F1
Nylon reinforced with fiberglass. Stamped 304 stainless steel cover.
Seachoice 30 Degree Plastic Rod Holder With Stainless Steel Flange - 89231 - 50-89231F1
Nylon reinforced with fiberglass. Stamped 304 stainless steel cover includes black rubber cap.
Seachoice 30 Degree Plastic Rod Holder With White Flange - 89211 - 50-89211F1
Injection molded ABS flange with heavy walled PVC tube.
Seachoice 30001 Oval Folding Cleat - Stainless Steel, 5" Length - 54017 - 50-30001F1
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed of corrosion resistant cast 316 Stainless Steel. Surface mount; no cut-outs or hole saws required. Fasteners not included.
Seachoice 30001 Oval Folding Cleat - Stainless Steel, 6" Length - 54018 - 50-30002F1
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed of corrosion resistant cast 316 Stainless Steel. Surface mount; no cut-outs or hole saws required. Fasteners not included.
Seachoice 30003 Oval Folding Cleat - Stainless Steel, 8" Length - 54019 - 50-30003F1
Mirror-polished, premium folding cleat provides a low-profile, ergonomic design for a sleek appearance while minimizing trip hazards. Constructed of corrosion resistant cast 316 Stainless Steel. Surface mount; no cut-outs or hole saws required. Fasteners not included.
Seachoice 30121 Stainless Steel Fender Locks (2 Per Pack) - 30121 - 50-30121F1
Made of stainless steel. Eye is to be permanently attached to fender line. The black rubber plug secures the eye and prevents it from sliding up.
Seachoice 30141, Stainless Steel Fender Holder Kit, 3/8" - 30141 - 50-30141F1
Includes fender line eye and receiverOne-hand push-button operationAllows quick installation and removal of fendersMaintains fender line at the ideal length316 stainless steel provides excellent corrosion resistance
Seachoice 30144, 3/8" Stainless Steel Reciever Only, 12/Case - 30144 - 50-30144F1
316 Stainless Steel receiver only, for Seachoice 30141
Seachoice 30146, 1/2" Stainless Steel Reciever Only, 12/Case - 30146 - 50-30146F1
316 Stainless Steel receiver only, for Seachoice 30146
Seachoice 30146, Stainless Steel Fender Holder Kit, 1/2" - 30143 - 50-30143F1
Includes fender line eye and receiverOne-hand push-button operationAllows quick installation and removal of fendersMaintains fender line at the ideal length316 stainless steel provides excellent corrosion resistance
Seachoice 30231 Stainless Steel Lifting Eye 1-1/2" - 30231 - 50-30231F1
316 Stainless steel. Tapped for 5/8" threaded connecting rod. Maximum vertical load 3000 lbs. If used for overhead lifting, both Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed.
Seachoice 30331 Open Base Cleat, Chrome/Zinc, 6" L X 1" W X 1-1/8" H - 30331 - 50-30331F1
Seachoice 30331 Open Base Cleat Chrome/Zinc 6" L x 1" W x 1-1/8" H. Modern design. Chrome-plated zinc withstands the rigors of marine conditions. Replacement for select Bayliners. Recommended for boats up to 25'. Tested to ABYC standards. Modern designChrome-plated zinc withstands the rigors of marine conditionsReplacement for select BaylinersRecommended for boats up to 25'Tested to ABYC standards
Seachoice 30341 Open Base Cleat, Chrome/Zinc, 6-1/8" L X 1-1/3" W X 1-1/4" H - 30341 - 50-30341F1
Seachoice 30341 Open Base Cleat Chrome/Zinc 6-1/8" L x 1-1/3" W x 1-1/4" H. Modern design. Chrome-plated zinc withstands the rigors of marine conditions. Replacement for select Bayliners. Recommended for boats up to 25'. Tested to ABYC standards. Modern designChrome-plated zinc withstands the rigors of marine conditionsReplacement for select BaylinersRecommended for boats up to 25'Tested to ABYC standards
Seachoice 304 Stainless Steel Cabin Door Hook - 36161 - 50-36161F1
Made of 304 stainless steel . Provides maximum strength and corrosion resistance. Plastic bushing in the eye prevents accidental unhooking due to vibration and reduces most of the rattling noise associated with other door hooks.
Seachoice 304 Stainless Steel Cabin Door Hook - 36171 - 50-36171F1
Made of 304 stainless steel . Provides maximum strength and corrosion resistance. Plastic bushing in the eye prevents accidental unhooking due to vibration and reduces most of the rattling noise associated with other door hooks.
Seachoice 304 Stainless Steel Cabin Door Hook - 36181 - 50-36181F1
Made of 304 stainless steel . Provides maximum strength and corrosion resistance. Plastic bushing in the eye prevents accidental unhooking due to vibration and reduces most of the rattling noise associated with other door hooks.
Seachoice 30600 Open Based Galvanized Dock Cleat, 6" - 30600 - 50-30600F1
Hot dipped. Suitable for work boats, seawalls and dock use.
Seachoice 30610 Open Based Galvanized Dock Cleat, 8" - 30610 - 50-30610F1
Hot dipped. Suitable for work boats, seawalls and dock use.
Seachoice 30620 Open Based Galvanized Dock Cleat, 10" - 30620 - 50-30620F1
Hot dipped. Suitable for work boats, seawalls and dock use.
Seachoice 30630 Open Based Galvanized Dock Cleat, 12" - 30630 - 50-30630F1
Hot dipped. Suitable for work boats, seawalls and dock use.
Seachoice 32681 Stainless-Steel Bottle Opener - 50-32681 - 50-32681F1
Manufactured of 304 polished stainless steel, stamped and formed. #8 screws included.
Seachoice 33801 Stainless Steel Strap Hinges (1 Pair Per Pack) - 50-33801 - 50-33801F1
316 Stainless steel. Drilled and countersunk.
Seachoice 33811 Stainless Steel Strap Hinges (1 Pair Per Pack) - 33811 - 50-33811F1
316 Stainless steel. Drilled and countersunk.
Seachoice 33851 Stainless Steel Strap Hinges With Base 4" X 1-1/16" (1 Pair Per Pack) - 33851 - 50-33851F1
304 Stainless steel hinge with black nylon base plate. Note: Can be used without base. 2 per card.
Seachoice 34141 Door Hinge, 2-3/4" X 1-3/8", Black Nylon , Pair - 34141 - 50-34141F1
Fiberglass filled black nylon hinge with stainless steel pin. Very sturdy and extremely lightweight. 2 per card.
Seachoice 34151 (2) 2-7/8" X 1-1/2" Polished Stainless Steel Utility Hinges With Black Nylon Base Plate - 34151 - 50-34151F1
Polished 304 stamped stainless steel hinge with black nylon base plate. Note: Can be used without base. 2 per card.
Seachoice 34231 (2) 3" X 1-1/2" Chrome Plated Zinc Utility Hinges - 34231 - 50-34231F1
Chrome plated zinc hinge. 2 per card.
Seachoice 34241 (2) 3" X 1-1/2" Chrome Plated Zinc Utility Hinges With 120 Degree Opening - 34241 - 50-34241F1
Chrome plated zinc hinge with 120° opening. 2 per card.
Seachoice 34971 Stainless Steel Continuous Hinge1-1/4" X 72" - 34971 - 50-34971F1
.040 Gauge 304 stainless steel. Drilled and countersunk on 2" centers. Bright annealed.
Seachoice 34973 Stainless Steel Continuous Hinge1-1/4" X 36" - 34973 - 50-34973F1
.040 Gauge 304 stainless steel. Drilled and countersunk on 2" centers. Bright annealed.
Seachoice 34981 Gauge Stainless Steel Continuous Hinge1-1/2" X 72" - 34981 - 50-34981F1
.040 Gauge 304 stainless steel. Drilled and countersunk on 2" centers. Bright annealed.
Seachoice 34983 Stainless Steel Continuous Hinge1-1/2" X 36" - 34983 - 50-34983F1
.040 Gauge 304 stainless steel. Drilled and countersunk on 2" centers. Bright annealed.
