Select Category
_0x200.jpg)
TACO J-Lock Sunshade System 60" Poles w/Carry Bag *Bases Not Included
TACO J-Lock Sunshade System 48" Poles w/Carry Bag *Bases Not Included
Taco Gs960 Grand Slam 960 Electric Masthead Anchor Light, 3-Nm, 40.43" - Gs-960 - 236-Gs960F1
The oblong design accommodates a longer, more powerful motor for excellent performance at sea. Suitable for powered vessels up to 39' (12 meters). This is a fully electric unit with a hidden base wire inside the hardtop, which easily installs to the top's surface. The GS-960 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers. Certified for USCG-required 3-NMIncludes heavy-duty anodized aluminum tube, light and 6" lead of 20-gauge wire from the base5-Watt Stern Light and 10-watt AnchorLow-draw, 0.6 amps per lightElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descentNo under-mount clearance neededSmooth lift and descentHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on the stainless-steel breakaway pin allows for manual operation1-year limited warranty
Taco Gs9001 Grand Slam 900 Masthead Anchor Light, 39-1/2" - Gs-900-1 - 236-Gs9001F1
Safe, no-hassle raising and lowering of an masthead anchor light Ideal for boats 39' in length or shorterCertified USCG for 3 NMStandard 1"-14 thread (male) shaftIncludes 32.75" of tube that can be cut to lengthFour 3-watt LED Cree chipsWater-resistance IP66 ratingMachined / Anodized aluminum body with a light brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate
Taco Gs90 Grand Slam 900 Electric Masthead Anchor Light, 39-1/4" - Gs-950 - 236-Gs950F1
With the simple push of a button, boaters can safely adjust the position of their Masthead Anchor Light from the comfort of the helm. Ideal for powered vessels 39' and under (12-meters and under), the GS-950 is certified for USCG-required 3 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Machined / Anodized aluminum bodyCertified for USCG-required 3-nmIncludes tube, light and 6" lead for 12-volt DC power supply for lightThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRemovable pin for manual adjustmentMounts to all hardtopsFour 3-watt LED Cree chips6-Watt Stern Light and 12-watt Anchor
Taco Gs860 Grand Slam 860 Electric Vhf Antenna Mount - Gs-860 - 236-Gs860F1
Polished stainless-steel body with a mirrored finishSmooth lift and descentStandard 1"-14 thread (male) shaft accommodates standard VHF antennas up to 8'No under-mount clearance neededHigh-torque, anti-backlash ball-bearing motorIntegrated nylon knob on breakaway pin allows for manual operation in case of power failureElectronic Control Module includes a 5A fuse for device protectionComes with a 12" wire lead and water-sealed Deutsch connector, using 18-gauge wire from the baseOperates on 12-volt DC for lift and descent1-year limited warranty
Taco Gs850 Grand Slam Electric Vhf Antenna Mount - Gs-850 - 236-Gs850F1
Designed with safety and innovation in mind, boaters can adjust the position of their antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Standard 1"-14 thread (male) shaft to accept standard antennas up to 8'No under-mount clearance requiredMachined / Anodized aluminum body with a light brushed finishThreaded shaft for consistent lift and descentDelrin bearings for smooth operationFeatures breakaway pin for manual adjustmentKit includes drill template and installation instructionsIncludes 6" lead for 12-volt DC power supply for lift and descentAccepts 7A fuse in the main +12 VDC power feed (not included)
Taco Gs8001 Grand Slam Universal Antenna Mount - Gs-800-1 - 236-Gs8001F1
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater. Safe, no-hassle raising and lowering of a VHF antennaNo more climbing on T-tops or gunnelsStandard 1"-14 thread (male) shaft to accept standard VHF antennasMachined / Anodized aluminum bodyLight brushed finishPolished Type-316L stainless steel crank handleFolding crank handle locks flush into baseThreaded shaft for consistent lift and descentDelrin bearings for smooth operationRoller bearings in crank assemblyMounts through up to 2" thick hardtopsIncludes 4" x 1/4" round backing plate (hardware not included)Made in the USA1-year limited warranty
Taco Gs500 Pro Series Mount, 1 Pr. - Gs-500 - 236-Gs500F1
the GS-500 enables anglers to adjust the lift and rotation of outrigger poles from the safety of the deck. This mount also features patent-pending Twist & Lock pole connection. Eliminates the need for pins or bolts when securing outrigger poles. Mount is Ideal for boats from 32 to 50-plus feet. Constructed from cast stainless-steel and machined aluminum for a stronger, lighter base and includes matching 6"x 8"x 1/2" thick oval backing plates. 3-year limited warranty.
Taco Gs390Xl Grand Slam 390Xl Outrigger Top Mount W/Crank, 1 Pr. - Gs390Xl - 236-Gs390Xlf1
Ideal for boats 25' - 50' with hardtops up to 4-1/2" thick. Anglers can easily deploy an outrigger's vertical lift and horizontal rotation from the boat deck in rough seas. Ideal for boats 25' - 50'Safely control lift and rotation from under the topOffset handle for better hand clearancePairs with 1-1/2" TACO 18' deluxe aluminum and 16' and 20' carbon fiber tele-outriggers with locking pin
