Select Category

2-Way Waste Manifold 12' Cable 1-1/2" Ports 2-way manifold with Whale Intelligent Control built in. The waste manifold can be used with a Whale Gulper pump to create a greywater disposal system. The m... More Details

2-Way Waste Manifold - 12' Cable - 3/4" Ports This manifold manages waste from multiple drains with intelligent control built in. A compact automatic system handles waste drainage from the two outlets... More Details

FW1225 Watermaster Automatic Pressure Pump - 12L - 45PSI - 24V Whale Watermaster Automatic Pressure Pump. For more than a decade we have refined our pressure pump designs to ensure long term reliabili... More Details

Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that... More Details

Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that ... More Details

Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile stren... More Details

Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the ba... More Details

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are moun... More Details

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mo... More Details

Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are m... More Details

Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesi... More Details

Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesi... More Details

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Single Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Retail Wire Tie Kit with AT-8040 Adhesive The AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 pieces of AT-5 white wire tie mount. Just enough parts for a small wiring job and an i... More Details

No Slide Metal/Composite Bonder *Case of 10* Revolutionary Metal Bonder will hold heavy parts at application without sliding on a vertical or overhead surface. AT-8040 will hold 3,500 lbs in 40 minute... More Details

No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No W... More Details

Executive Fastener Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Ac... More Details

Executive Adhesive & Fastener Kit w/AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Con... More Details

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details

Double Clamp Each clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous se... More Details