Select Category
_0x200.jpg)
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412138W-3 - 354-412138W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412128W-3 - 354-412128W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412121W-3 - 354-412121W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | White Finish - 412118W-3 - 354-412118W3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412138B-3 - 354-412138B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412131B-3 - 354-412131B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412128B-3 - 354-412128B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412121B-3 - 354-412121B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412118B-3 - 354-412118B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Stamped Powder Coated Steel & 304 Stainless 12V Mrv Wiper Motor | Black Finish - 412111B-3 - 354-412111B3F1
MRV Wiper Motors are a two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-hand park, factory preset for left-hand park. Powers up to a 24" arm and blade configuration (36" total length). CE approved. 3-year warranty.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431153-1 - 354-4311531F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431152-1 - 354-4311521F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Sonic Mini 3 Amp 108 Db Compact Horn - 431151-1 - 354-4311511F1
These Sonic Mini Compact Horns feature ASA plastic covers for impact and UV resistance. Mounting bracket can be used as a wiring template. Horn wiring has no polarity, so the negative or positive wire can be attached to either side. When installed, horns should point slightly downward to permit water drainage. At 108 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. 12VDC.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400004-1 - 354-4000041F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Side Light - 2-7/8" X 2-3/16" X 2-1/8" - Injection Molded Polycarbonate & Stamped Stainless Steel - 400003-1 - 354-4000031F1
For replacement of existing lighting (not for new construction). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for navigation lights for more information.
Seadog Replacement Cap & Gasket - 325239-1 - 354-3252391F1
Fits 325175 & 325235 rod holders.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327361-1 - 354-3273611F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327359-1 - 354-3273591F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount Dual Boat Fender Holder Storage Rack - 7/8" To 1" - 327357-1 - 354-3273571F1
Rail Mount Dual Fender Holder is constructed of formed 304 stainless steel. For use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use.
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327161-1 - 354-3271611F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Rail Mount 11-3/4" Rod Holder - Fits 7/8" To 1" Tubing - 327160-1 - 354-3271601F1
Constructed of injection molded polypropylene with a front mount adjustment screw. This allows easy adjustment without having to disassemble the rail mount brackets. A leash on the rod and/or reel is recommended when using rail mount rod holders. Accommodates rods up to 1-3/4".
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336382-1 - 354-3363821F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336380-1 - 354-3363801F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336362-1 - 354-3363621F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
Seadog Quarter-Turn Deck Plate With Internal Collar | #8 Fastener | White Finish - 336360-1 - 354-3363601F1
The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.
