Select Category
_0x200.jpg)
Seadog Op27001 Replacement Screw For Deck Hinges - Op27001 - 354-Op27001F1
Screw for 270160, 270161, 270200, 270230 & 270240
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961L - 354-221961Lf1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Non-Watertight Slam Latch | Investment Cast 316 Stainless | 1/8" Fastener | 1-1/2" Diameter - 221961 - 354-221961F1
Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round cutout and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432611-1 - 354-4326111F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 20 Amp 124 Db 12V 11 Psi Mini Single 9-5/8" Trumpet Air Horn - 432610-1 - 354-4326101F1
MaxBlast Mini Single Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 124 decibels and a frequency (Hz) of 630±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66'). 12VDC. Maximum: 20A. NMMA Type Accepted #2577056 & 2577057.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 24V - 432598-1 - 354-4325981F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 24VDC. Maximum: 20A.
Seadog Maxblast 11 Psi Air Horn 2-1/2" X 4" Compressor, 12V - 432599-1 - 354-4325991F1
MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A.
Seadog Lift Handle - 221275-1 - 354-2212751F1
Investment Cast 316 Stainless. Use #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, White - 401405-1 - 354-4014051F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life warm white LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Light, Blue - 401409-1 - 354-4014091F1
Stamped 304/Plastic. These lights feature 3 low amperage, long life blue LEDs. IP65 waterproof rating. Requires #10 FH fasteners.
Seadog Led Surface Mount Courtesy Edge Light, White - 401375-1 - 354-4013751F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Surface Mount Courtesy Edge Light, Blue - 401379-1 - 354-4013791F1
360° LED Surface Mount Courtesy Edge Lights are constructed of stamped 304 stainless steel and lightweight plastic for corrosion resistance. Utilizing three blue or warm white LEDs that draws very low amperage and have a very long life. Installs with two #10 FH fasteners (not included). IP65 water resistant rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401354-1 - 354-4013541F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Snap-In Courtesy Light With Aluminum Bezel - 401350-1 - 354-4013501F1
LED Snap-In Courtesy Light is recess mounted in a 1" diameter hole, requiring no installation fasteners. Features a contemporary aluminum bezel. Utilizing one blue or white LED that draws very low amperage to keep power consumption to less than 1 watt. IP67 waterproof rating.
Seadog Led Day/Night Dome Light, 5" - 400353-1 - 354-4003531F1
These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254512-1 - 354-2545121F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Stud Mount Hand Rail | (6) Blue Led'S | Formed 304 Stainless | 5/16" Fastener - 254509-1 - 354-2545091F1
LED Stud Mount Hand Rails have six blue LED's in each mounting base piece and are shipped as three pieces - one handrail and two bases. 12 volt DC. Formed 304 stainless.
Seadog Led 12V Dc Telescopic All Around Light | Uscg 2 Nm Approved | #8 Fastener - 400016-1 - 354-4000161F1
LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
Seadog Large Boat Hook Mooring Buoy Snap Kit - 491058-1 - 354-4910581F1
The Large Boat Hook Mooring Buoy Snap Kit is the convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles, turning a challenging task into a quick and simple process. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. Sea-Dog® Boat Hooks have pre-drilled mounting holes for easy installation. Truly an advantage on high bowed vessels by simply reaching out with the boat pole, hook the carabiner on the inside of the attachment point, then pull back on the boat pole. The carabiner snaps shut as it slides free of the pole, securely clipping to the mooring eye or cleat. The large size works on cleats up to 24"! WLL - 2,185 lbs.
Seadog Horizontal Mount Side Lights, 1 Pr. - 400165-1 - 354-4001651F1
Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included).
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270167-1 - 354-2701671F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hinged Jaw Slide Fitting With Bolt | Investment Cast 316 Stainless | 1/4" Pin Size - 270166-1 - 354-2701661F1
Quickly and easily replace a damaged jaw slide. Hinged jaw slides allow for installation of the slide on the tubing without having to remove the top from the boat or remove canvas, end fitting, or straps in order to install a new fitting.
Seadog Hatch Pull - 222420-1 - 354-2224201F1
Constructed of chrome plated sand cast brass these Hatch Pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321296-1 - 354-3212961F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
Seadog Hatch Adjuster | Formed & Stamped 304 Stainless & Nylon - 321295-1 - 354-3212951F1
Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.
