Select Category
_0x200.jpg)
Bep 1001706 Curved Rocker Switch, Off/On, Spdt - 1001706 - 969-1001706F1
Single pole, double throw switch turns one of two circuits on. On/On position, can also be used as an On/Off by isolating terminal 3Fits panel hole .55" x 1.13", fits panel thickness .025" to .25"Replaces Cole Hersee part number 54007
Bep 1001705 Illuminated Rocker Switch, Off-On, Spst, Illuminated Red - 1001705 - 969-1001705F1
Single pole, single throw switch turns one circuit on and off. Switches snap-in mounting holes 0.55" x 1.13", fits panels 0.02" to 0.25" thickBlack plastic body with clear plastic rocker that illuminates red when ONReplaces Cole Hersee part number 54003
Bep 1001704 Rocker Switch, Off-On, Spst, 1/4" Blade Terminals - 1001704 - 969-1001704F1
Shock and weather resistant for use in harsh marine and industrial environments Standard and illuminated actuatorsSnap-in mounting to fit panel hole 1.45" x .83" into panels .093" to .187" thick
Bep 1001703 Rocker Switch Bracket, Single End, Left Or Right - 1001703 - 969-1001703F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001702 Rocker Switch Bracket, Double, Middle Section - 1001702 - 969-1001702F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001701 Rocker Switch Bracket, Triple, 2 Ends & 1 Center - 1001701 - 969-1001701F1
Modular design permits assembly in groups Used with Rocker Switches and Contoura SwitchesPanel hole 1.45" x .83"
Bep 1001610 3 Position Ignition Switch - 1001610 - 969-1001610F1
Impact and corrosion-resistant switch fits standard 7/8" diameter hole and includes PVC boot for added weather protection. Coded tumbler lock for added secutiry, includes two keysNominal voltage is 6-36V DCRated for 15A ignition, 5A start#8-32 screw terminalsFits panels upt to 7/8" thickReplaces Cole Hersee part number M-850
Bep 1001609 4 Position Ignition Switch - 1001609 - 969-1001609F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-712
Bep 1001607 3 Position Ignition Switch - 1001607 - 969-1001607F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for ignition: 10A at 12V DC and start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-550
Bep 1001606 3 Position Ignition Switch - 1001606 - 969-1001606F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysWeather resistant key slot and bootNominal voltage is 12V DCRated for ignition: 10A at 12V DC and start: 5A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-550-14
Bep 1001605 2 Position Ignition Switch - 1001605 - 969-1001605F1
Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. Coded tumbler lock, includes two keysNominal voltage is 12V DCRated for 10A at 12V DC#8-32 screw terminalsFits panels up to 1" thickReplaces Cole Hersee part number M-489
Bep 1001604 3 Position Ignition Switch - 1001604 - 969-1001604F1
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Nominal voltage is 12V/24V DCRated for 10A at 12V DC, 5A at 24V DCFits panels up to 3/8" thickReplaces Cole Hersee part number 95060-60
Bep 1001603 4 Position Ignition Switch - 1001603 - 969-1001603F1
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Nominal voltage is 12V/24V DCRated for 10A at 12V DC, 5A at 24V DCFits panels up to 3/8" thickReplaces Cole Hersee part number 95060-50
Bep 1001602 Kill Switch Lanyard Only - 1001602 - 969-1001602F1
Ideal for adding engine-stop safety to older boats. Switch & lanyard combo (1001601), or replacement lanyard only (1001602).
Bep 1001601 Kill Switch W/Lanyard - 1001601 - 969-1001601F1
Ideal for adding engine-stop safety to older boats. Switch & lanyard combo (1001601), or replacement lanyard only (1001602).12-24V DC, Rating 10A at 12-24V DC, Termination Type 1/4" blades.
Bep 1001508 Heavy-Duty Push Button Switch With Cap, Off/(On) - 1001508 - 969-1001508F1
Single pole, single throw switch turns one circuit on and off. Can be used for intermittent windshield wiper or horn control. Fits panels up to 1" thick5/8 inch mounting holeReplaces Cole Hersee part number M-626
Bep 1001507 Momentary Push Botton Switch, Off/(On) - 1001507 - 969-1001507F1
Suitable for 6-36V system configurations Momentary actuation ideal for use with hornsOptional weather proof rubber caps available with threaded or press-on installationReplaces Cole Hersee #: M-612
Bep 1001506 Pvc Coated Push Button Switch With Cap, Off/(On) - 1001506 - 969-1001506F1
Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt. Replacement cap 1001501Replaces Cole Hersee part number M-608
Bep 1001505 Push Button Switch With Cap, Off/(On) - 1001505 - 969-1001505F1
Single pole, single throw switch turns one circuit on and off. Can be used for intermittent horn or windshield wiper control. Replaces Cole Hersee part number M-492.
Bep 1001504 Momentary Push Botton Switch, Off/(On) - 1001504 - 969-1001504F1
Suitable for 6-36V system configurations Momentary actuation ideal for use with hornsOptional weather proof rubber caps available with threaded or press-on installationReplaces Cole Hersee #M-490
Bep 1001502 Push Button Threaded Cap - 1001502 - 969-1001502F1
Protect switch mechanism from water and dirt with these rubber covers. Black.
Bep 1001501 Push Button Snap On Cap - 1001501 - 969-1001501F1
Protect switch mechanism from water and dirt with these rubber covers. Black.
Bep 1001402 Momentary Contact Switch Off/(On), Black - 1001402 - 969-1001402F1
Single pole, single throw momentary switch turns one circuit on and off. Compact red push button switch can be used for horn, starter, and other momentary applications. Fits panels up to 1/4" thick.
Bep 1001401 Momentary Contact Switch Off/(On), Red - 1001401 - 969-1001401F1
Single pole, single throw momentary switch turns one circuit on and off. Compact red push button switch can be used for horn, starter, and other momentary applications. Fits panels up to 1/4" thick.
Bep 1001308 Push-Pull Switch, Off/(On) - 1001308 - 969-1001308F1
Well suited for managing a variety of single or multiple circuit lighting applications Shock and weather resistant for use in harsh marine and industrial environmentsSuitable for 6-36V system configurations with up to 10A ratings (12V)(On) in parenthesis indicates a momentory postion
