Select Category

Battswitch W/Alternator Disconnect - 8503Dp - 9-8503Dpf1

Medium Duty. For use with two or more batteries and single or dual engine systems. Permits selection between batteries for starting and charging or operation of both batteries in parallel. They allow addition of an extra battery for use with accessories. The "OFF" position also acts as an emergency disconnect in the event of an electrical problem. Ignition protected. Surface mount. For use with systems under 50 volts. Capacity - 250 amps continuous, 360 amps intermittent. Alternator Field Disconnect (AFD) Models, when used with non-utilized alternators, these models will interrupt the field current (reducing the possibility of damage) if turned "OFF" with the engine running. Size: 5-1/4 dia. x 2-5/8 deep. UL Listed.

Battery Tray, Group 27 - 55404 - 17-55404F1

Made from heavy duty acid resistant plastic with stainless steel hardware. Meets U.S. Coast Guard CFR 183.420 and ABYC E-10.7 specifications.

Battery Tray-Series 27, 30 & 31 - 42216 - 114-042216F1

Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)

Battery Tray-Series 24 - 42215 - 114-042215F1

Non-corrosive high-strength polyethylene construction resists chemicals and rust Meets Coast Guard regulations (E10)

Battery Tray W/Strap, Group 27 - 42234 - 114-042234F1

Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).

Battery Tray W/Strap, Group 24 - 42233 - 114-042233F1

Non-corrosive high-strength polyethylene construction resists chemicals and rust. Meets Coast Guard regulations (E10).

Battery Tray 27M-W/Cross Bar - 2626581 - 23-90915F1

Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.

Battery Tray 24M-W/Cross Bar - 2626216 - 23-90905F1

Heavy-duty, non-corrosive, black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and USCG requirements. Patented design. Install with #10 screws. Contains no metal parts to corrode and no webbing straps to fade.

Battery Terminal, Universal - 13730 - 50-13730F1

Converts standard battery post terminals to a marine stud connector. Allows for easy removal of connector from battery. Plated wing nuts. 3/8" Positive stud and 5/16" negative stud. Fits all standard battery posts.

Battery Terminal, Positive - 62711 - 50-62711F1

Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 3/8" Positive stud. Fits all standard battery posts.

Battery Terminal, Negative - 62701 - 50-62701F1

Clamp type wing nut terminal made of lead alloy. Brass plated wing nuts. 5/16" Negative stud. Fits all standard battery posts.

Battery Terminal Single Fuse Block, 30-300 Amps - 5191-Bss - 661-5191F1

Compact, high-amp fuse, appropriate for DC main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraintsWeatherproof - for small open boats and other harsh environmentsMounts to 3/8" battery post, battery switch, or bus system.Voltage Max. Operating: 58V DCAmperage Max. Operating: 300ATerminal Fuses Available: 30-300 AmpsFuse sold separately

Battery Terminal Protector 7.5Oz Not For Sale In Canada - 5046 - 77-05046F1

Battery Terminal Mount Busbars - 2340-Bss - 661-2340F1

Tin plated copper bus handles voltage up to 32VDC and is rated for 100 Amps. #8-32 Screw terminals w/captive star lock washers ensure a good connection.

Battery Terminal Double Fuse Block, 30-300 Amps - 2151-Bss - 661-2151F1

Compact, high-amp fuse, appropriate for DC main, inverter, windlass, and bow thruster circuit protection Provides high current protection in tight space constraintsWeatherproof - for small open boats and other harsh environmentsMounts to 3/8" battery post, battery switch, or bus system.Voltage Max. Operating: 58V DCAmperage Max. Operating: 300ATerminal Fuses Available: 30-300 AmpsFuses sold separately

Battery Terminal Covers - 415115-1 - 354-4151151F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Covers - 415110-1 - 354-4151101F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Covers - 099078-10 - 114-09907810F1

Meets Coast Guard and BIA safety regulations requiring antishort protection for battery terminals. Flexible PVC. Will accept 1/2" OD terminal cable.

Battery Terminal Cover, Red - 415116 - 354-415116F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Cover, Red - 415111 - 354-415111F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Cover, Black - 415117 - 354-415117F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Cover, Black - 415112 - 354-415112F1

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

Battery Terminal Cover - Standard 2-2/0 - 590-3065 - 590-3065F1

Contains 1 red and 1 black protector boot.Accommodates battery terminals w/o wing nut.

Battery Terminal - Post Top Style4/0 Gauge - Negative - 50-63581 - 50-63581F1

Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded

Battery Terminal - Post Top Style4 Gauge - Negative - 50-63541 - 50-63541F1

Environmentally friendly, 100% copper battery terminal. The post top design is manufactured with the highest quality C11000 ETP copper and is completely lead free and RoHS compliant - making it exempt from CA Proposition 65 requirements. Maximum conductivity (101% IACS at 68F)Tin plated for corrosion resistanceProvided with nut and bolt installedExceeds SAE standard J-1811Color coded, die coded