Select Category
_0x200.jpg)
Aluminum Drain Tube, 1" X 3" - 021002-300D - 114-021002300Df1
Special alloy. Flanged 90° one end. Functions as drain for transom, motor well, livewell or baitwell. Use similar metal between tubes and plugs. Designed for use with Moeller Snap-Tite, Turn-Tite and Trail 'n Bail Plugs. Wall thickness is .035". Length under flange given.
Aluminum Drain Tube, 1" X 2 1/4" - 021002-225D - 114-021002225Df1
Special alloy. Flanged 90° one end. Functions as drain for transom, motor well, livewell or baitwell. Use similar metal between tubes and plugs. Designed for use with Moeller Snap-Tite, Turn-Tite and Trail 'n Bail Plugs. Wall thickness is .035". Length under flange given.
Aluminum Drain Tube, 1" X 1 7/8" - 021002-188D - 114-021002188Df1
Special alloy. Flanged 90° one end. Functions as drain for transom, motor well, livewell or baitwell. Use similar metal between tubes and plugs. Designed for use with Moeller Snap-Tite, Turn-Tite and Trail 'n Bail Plugs. Wall thickness is .035". Length under flange given.
Aluminum Cleaner Quart Bell Ma Fly Not For Resale In Canada - Alu100-Q - 700-Alu100Qf1
Aluminum Cleaner Gallon - Alu100-G - 700-Alu100Gf1
Is a revolutionary product that is safe and environmentally friendly. It will clean and brighten your Pontoon tubes from top to bottom without ACIDS, safely and effectively. USED ON BARE ALUMINUM ONLY. Without scrubbing, just spray on and rinse off.
Aluminum Anode Assembly - 42121Q02 - 710-97-42121Q02F1
Mercruiser Anode Kit. Always check propeller clearance after installing new trim tab anodes. Aluminum. Application Cavitation Plate Anode Kit. For Force Standard Gearcase Models: 9.9/15 hp. 2-cycle MY1998, Mercury/Mariner Standard Gearcase Models: 6/8/9.9 hp. 2-cycle MY1986 & newer, F8/9.9 hp. FourStroke MY1995-2004, F13.5 hp. FourStroke MY2001 & newer, F15 hp. FourStroke MY1998-2006, XR10, 10 Marathon, 10 Seapro, 10 Viking
Aluminex™ Pontoon & Aluminum Cleaner - Gallon - Mk31128 - 323-Mk31128F1
Maximum-strength formula quickly removes the heaviest oxidation and eliminates waterline stains, lime deposits and algae stains. Not for use on painted surfaces. Gallons sold by the case only.
Aluminex Clean & Shine - Mk3332 - 323-Mk3332F1
Eliminates light to medium oxidation, stains and deposits. This unique product utilizes SAFE ACID TECHNOLOGY™ to provide a gentler cleaner with added brightening action. Safe on anodized and painted aluminum.
Aluminex Bottom Cleaner - Qt. - Mk3132 - 323-Mk3132F1
Maximum-strength formula quickly removes the heaviest oxidation and eliminates waterline stains, lime deposits and algae stains. Not for use on painted surfaces
Alumibond Tape 4Inx50' Replaces P/N 707-As450 Rvx - Ebab04050R - 707-Ebab04050Rf1
Alumaprotect Strontium Chromate Epoxy Primer, 2 Gal. Kit - 14400/1440016 - 93-44004401Gf1
Aluma Protect 4400/4401 is a 2 part strontium chromate primer designed to form the ideal barrier coat over roughed bare aluminum. This is the appropriate epoxy to use when aluminum has been sandblasted, sanded or ground so that a tooth is present. For smooth aluminum, choose Pettit Metal Primer 6455/044. AlumaProtect provides maximum resistance to fresh or salt water, thus eliminating corrosion. This complete coating system resists water, industrial chemical fumes, and very humid environments. Intended to be used as a primary coat over bare aluminum hulls and outdrives. AlumaProtect 4400,4401 will chalk if not topcoated. Two coats are recommended over sandblasted aluminum. Then overcoat with Pettit Protect 4700/4701 for optimum results before finishing antifouling paint. Easy to Mix and ApplyEpoxy Primer for AluminumStrontium Chromate for Maximum Corrosion ControlSmooth finish provides an excellent bonding surface for additional primers or topcoats
Aluma-Protect - 3/4 Gl Kit - 14400/1440106 - 93-44004401Ktf1
Aluma Protect 4400/4401 is a 2 part strontium chromate primer designed to form the ideal barrier coat over roughed bare aluminum. This is the appropriate epoxy to use when aluminum has been sandblasted, sanded or ground so that a tooth is present. For smooth aluminum, choose Pettit Metal Primer 6455/044. AlumaProtect provides maximum resistance to fresh or salt water, thus eliminating corrosion. This complete coating system resists water, industrial chemical fumes, and very humid environments. Intended to be used as a primary coat over bare aluminum hulls and outdrives. AlumaProtect 4400,4401 will chalk if not topcoated. Two coats are recommended over sandblasted aluminum. Then overcoat with Pettit Protect 4700/4701 for optimum results before finishing antifouling paint. Easy to Mix and Apply
Aluma Hawk Jon Boat Tan, Qt. - Ah7050Qt - 95-Ah7050Qtf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Jon Boat Tan, Gal. - Ah7050Gl - 95-Ah7050Glf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Jon Boat Green, Qt. - Ah7033/Qt - 95-Ah7033Qtf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Jon Boat Green, Gal. - Ah7033/Gl - 95-Ah7033Glf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Jon Boat Blue, Qt. - Ah7002Qt - 95-Ah7002Qtf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Jon Boat Blue, Gal. - Ah7002/Gl - 95-Ah7002Glf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Black, Qt. - Ah7005/Qt - 95-Ah7005Qtf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Black, Gal. - Ah7005/Gl - 95-Ah7005Glf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
Aluma Hawk Aluminum Gray, Qt. - Ah7031/Qt - 95-Ah7031Qtf1
Aluma Hawk is a quick-dry, high-solids, corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline, but contains no antifouling characteristics.
