Select Category
90° Epdm Rubber Hump Hose, 6" - 16-221-6X5 - 88-2216X5F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
90° Epdm Rubber Hump Hose, 6" - 16-221-4X3 - 88-2214X3F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
90° Epdm Rubber Hump Hose - 16-221-8X6 - 88-2218X6F1
100% High temperature EPDM rubber. Maximum operating temperature 250°F (121°C).
90° Angle Brackets, Pr. - 221315-1 - 354-2213151F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90° Angle Brackets, Pr. - 221310-1 - 354-2213101F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90° Angle Brackets, Pr. - 221305-1 - 354-2213051F1
A corrosion resistant 304 stainless steel bracket for 90° connections. Installs with four #8 FH fasteners (not included).
90 St Bend 3In Abs Bell Rv Rvx - 632453 - 135-632453F1
90 Degree Thru-Hull, 1-1/8" Barb, Standard - Th1290T - 232-Th1290Tf1
Threaded thru-hull for use with 1-1/8" screw-in overflow drain tube.
90 Degree Thru-Hull, 1-1/8" Barb, Short - Th1890T - 232-Th1890Tf1
Threaded thru-hull for use with 1-1/8" screw-in overflow drain tube.
90 Deg. Tee - 296090-1 - 354-2960901F1
Constructed of chrome plated die cast zinc. These Rail Tees, Elbows, and Bow Forms are recommended for freshwater use. Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets.. For use with 7/8 OD stainless tubing with a wall thickness of 0.049".
90 Deg. Clearview Adapter Valterra Dometic Rvx - T1023 - 800-T1023F1
90 Deg Inside Eye End White 2/Cd - 273351-1 - 354-2733511F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
90 Deg Inside Eye End Black 2/Cd - 273350-1 - 354-2733501F1
The Side Mount Eye End used in conjunction with an Eye Mount Bracket converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4" OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon.
90 Deg Fl Tank Vent W/Black Cap - 1670-1 - 23-16701F1
These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover.
9/16" X 5' Gasket For Cast Hatches - P100525 - 49-P100525F1
9/16" X 10' Gasket For Cast Hatches - P10055 - 49-P10055F1
9/16 X 200'Nylon W/5/16 X 20' - 69000339 - 239-69000339F1
Designed specifically for top performance with all Lewmar V series and Pro series windlasses. They feature ACCO hi-test, hot-dipped galvanized chain and 3-strand nylon twist rope that is chemically treated to remain flexible after constant exposure to salt water and sun. A special tapered splice allows smooth transition from rope to chain
9", 5 Wire Heavy Duty Roller Frame - 92141 - 50-92141F1
Plated rodsPlastic threaded handleDiameter: 1-1/2"
9" X 9" Trim Tab Kit W/O Switch - 15000-101 - 622-15000101F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately
9" X 18" Trim Tab Kit W/O Switch - 15002-101 - 622-15002101F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardware Kit Includes:Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsStainless steel mounting hardwareSwitch kits sold separately
9" X 12" Trim Tab Kit W/Standard Tactile Switch - 15104-102 - 622-15104102F1
Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14". Kit Includes: Waterproof plug and play Deutsch connectors12 -volt actuators (2) with 6 foot leads2 stainless steel trim tab planes-12 gauge20' actuator extension harnesses (2) with Deutsch connectorsAll stainless steel mounting hardwareSwitch KitSwitch Kit
