Select Category
_0x200.jpg)
Tie Down Engineering Dock Hardware - Outside Corner End - 26428 - 241-26428F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 12-1/4"L x 5"H.
Tie Down Engineering Dock Hardware - Outside Corner End - 26402 - 241-26402F1
Commercial grade. Use this corner at ends of fingers and docks. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26532 - 241-26532F1
Standard Grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26427 - 241-26427F1
Commercial Grade w/ 3/4" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5" x 5".
Tie Down Engineering Dock Hardware - Male T Connector 5"L X 5"H - 26408 - 241-26408F1
Commercial grade w/ 1/2" tab. Use with Female T connector to attach fingers and ramps. Bolt set required for joint. Size: 5"L x 5"H.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26405 - 241-26405F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner Pipe Holder, Commercial Grade - 26404 - 241-26404F1
Commercial grade. Should be used with one of the outside corners and has an internal pipe holder. 8-1/4"L x 5"H. Requires carriage bolt set for attaching. 2" Pipe.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26524 - 241-26524F1
Standard grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26417 - 241-26417F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 3" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26403 - 241-26403F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ 2-1/4" holes.
Tie Down Engineering Dock Hardware - Inside Corner 8-1/4"L X 5"H - 26401 - 241-26401F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 8-1/4"L x 5"H w/ Square holes.
Tie Down Engineering Dock Hardware - Inside Corner 10-1/2"L X 5"H With 2-1/4" Elongated Holes And Larger Brace, Commercial Grade - 26424 - 241-26424F1
Commercial grade. Should be used with one of the outside corners. Each leg has elongated holes for easy fit. 10-1/2"L x 5"H w/ 2-1/4" holes & larger brace.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24292 - 241-24292F1
Commercial grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 5".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24289 - 241-24289F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Lag Bolt Set (8 Per Bag) - 24287 - 241-24287F1
Standard grade bolt and flat washer hot dip galvanized used to attach flotation drums to dock system. Size: 3/8" x 2".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Heavy Duty Piling Hoop, Commercial Grade - 26412 - 241-26412F1
Commerical grade. Heavy duty piling hoop for pilings up to 12" in diameter. The hoop is constructed of 1-1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional deck plate.
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26535 - 241-26535F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Hot Dipped Galvanized Carriage Bolt Set (8 Per Bag) - 26534 - 241-26534F1
Used to attach component parts. 3/8 x 2-1/2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/2" x 3".
Tie Down Engineering Dock Hardware - Heavy Duty Hot Dipped Galvanized 6" Roller Assembly, Commercial Grade - 26414 - 241-26414F1
Commercial heavy duty roller assembly. Bracket and roller bolt directly to the deck plate (26416). An aid to the up and down motion of the dock in areas of tidal action. 6" roller turns on a 5/8" diameter shaft. 3/4" bracket is hot-dipped galvanized. Size: 10-1/2" x 2".
Tie Down Engineering Dock Hardware - Heavy Duty 4" X 6" Deck Plate, Commercial Grade - 26416 - 241-26416F1
Heavy duty deck plate for use with Piling Hoop. This 3/16" thick 4"x 6" x 22" plate can be bolted from the top and side of the dock. The hoop can then be bolted to the deck plate, allowing it to be removed seasonally.
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26429 - 241-26429F1
Commercial Grade w/4" radius for 8" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 14" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26394 - 241-26394F1
Commercial Grade w/6" radius for12 Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 18" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26393 - 241-26393F1
Commercial Grade w/7" radius for 14" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 20" x 3".
Tie Down Engineering Dock Hardware - Galvanized Steel Piling Hoop, Commercial Grade - 26391 - 241-26391F1
Commercial Grade w/5" radius for 10" Piles. Heavy duty 1/4" galvanized steel. 3" high. Can bolt to the dock directly or to an optional deck plate (26416). Size: 16" x 3".
Tie Down Engineering Dock Hardware - Galvanized Inside Rolling Ramp Bracket Includes Left And Right Ramp Brackets, Commercial Grade - 26431 - 241-26431F1
5" x 11" x 1/4" galvanized steel bracketIncludes left and right ramp brackets
