Select Category
_0x200.jpg)
Tie Down Engineering Danforth Standard Anchor - 94010 - 241-94010F1
Have endured over 50 years giving reliable performance. Has the traditional good holding power which has always been associated with Danforth Standard anchors. The shank is made of high strength steel. The steel flukes are strong and wide. Each anchor has a hot dipped galvanized coating for long lasting protection. Model 2-1/2S for 10' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94022 - 241-94022F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 35H for 64' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94021 - 241-94021F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 20H for 50' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94020 - 241-94020F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 12H for 42' boat size.
Tie Down Engineering Danforth Hi-Tensile Anchor - 94019 - 241-94019F1
Danforth's toughest, most durable anchor and features very high holding power. The flukes are fabricated for additional strength and then beveled to allow quick, deep bottom penetration. Shank is made from 4130 steel which treated for extra strength. Hot dipped galvanized finish. Model 5H for 31' boat size.
Tie Down Engineering Bunk Slicks - Black - 86170 - 241-86170F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. Stainless mounting screws included.
Tie Down Engineering Bunk Slicks - Black - 86164 - 241-86164F1
Attaches directly onto carpeted bunk boards. Fits 2" x 6" or 2" x 4" standard bunk boards. Slide on or off with less effort. Easy to install. 40 Stainless mounting screws included.
Tie Down Engineering Bow Safety Chain 3/16" X 15-1/2" - 81201 - 241-81201F1
Connects the boat to the bow stand of the trailer. 3/16" x 12 links.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81250 - 241-81250F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81220 - 241-81220F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81215 - 241-81215F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81210 - 241-81210F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81200 - 241-81200F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Bolster Brackets - Sold As Pair - 81195 - 241-81195F1
Designed to support bolster or bunk boards. Slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80325 - 641-80325 Superseded By: 641-K71G0191F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80235 - 641-80235 Superseded By: 641-K71G0307F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80060 - 641-80060 Superseded By: 641-K71G0189F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering Axle Spindles Includes Nut, Washer And Cotter Pin - 80055 - 641-80055 Superseded By: 641-K71G0190F1
Includes nut, washer, and cotter pin. Bearings not included.
Tie Down Engineering 86588 Flare Teardrop Fender, Smooth Aluminum - 86588 - 241-86588F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86587 Teardrop Fender, Aluminum Tread - 86587 - 241-86587F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86586 Teardrop Fender, Smooth Aluminum - 86586 - 241-86586F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86585 Round Single Fender, Aluminum Tread - 86585 - 241-86585F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86584 Round Single Fender, Smooth Aluminum - 86584 - 241-86584F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86583 Jeep Single Fender, Aluminum Tread - 86583 - 241-86583F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
Tie Down Engineering 86582 Jeep Single Fender, Smooth Aluminum - 86582 - 241-86582F1
Heavy duty stamped fenders can be drilled to fit a variety of mounting options. Mounting hardware not included.
