Select Category

C.E. Smith 15" Spare Tire Cover - Black

C.E. Smith 2,500 lb Drop Leg Trailer Jack

C.E. Smith 2' Short Bunk Guide-On - Pair

C.E. Smith 2" Stationary Keel Roller Assembly f/2" Tongue

C.E. Smith 27111 Bearing Kit, 1" Straight Spindle, 1.98" Id Inner And Outter Hub - 27111 - 618-27111F1

Each set outfits one wheel. Includes outer and inner.

C.E. Smith 27112 Bearing Kit, 1-1/16" Straight Spindle, 1.98" Id Inner And Outter Hub - 27112 - 618-27112F1

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27113 Bearing Kit, 1-1/4" Straight Spindle, 2.32" Id Inner And Outter Hub - 27113 - 618-27113F1

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27115 Bearing Kit, 1-1/6" To 1-3/8" Tapered, 2.56" Id Inner, 1.98" Outter Hub - 27115 - 618-27115F1

Each set outfits one wheel. Includes outer and inner bearing set, two races, grease seal and cotter pin.

C.E. Smith 27310G Heavy-Duty Galvanized Spare Tire Carrier - 27310G - 618-27310Gf1

Mount your spare tire vertically to the side of trailer tongue or frame rails. The trailer tongue in the front of the trailer. The offset design moves the tire and wheel up and away from the trailer frame to improve ground clearance. No drilling is required to install the carrier because the included U-bolts clamp the carrier to the trailer frame. The crisscross design increases the holding power of the U-bolts. Mouting u-bolts may be crossed to fit shorter frames or may be installed parallel for more reach. Offset height raises tire and provides additional ground clearance3/16" thick galvanized steelHolds either 4 or 5 lug wheels that are up to 15"Fits frames up to 4" tall by 1" up to 3-1/2" wide

C.E. Smith 27575 Pwc Dolly, 34" W X 48" L X 19" H - 27575 - 618-27575F1

Ideal for moving a small vessel such as a Jet Ski, Jon Boat, Small Sailboat, Dingy, or Inflatable around on any hard surface. Great for moving a vessel into a storage space or as a vessel display platform in a showroom. 1-1/2" square galvanized steel tubingRugged 4" castersTopped with 4' long carpeted bunks that adjust to gently support the vesselBunk spacing can be set at 12", 16" or 20"1,000 lb capacity

C.E. Smith 27580 Outboard Motor Dolly, Red - 27580 - 618-27580F1

Easily transport motors weighing up to 250 lbs45" Overall heightFolds flat for convenient storage

C.E. Smith 27610 Roller Guide-Ons, Pair - 27610 - 618-27610F1

Smooth rolling guides assist in centering the boat onto the trailer. Ideal for retrieving boat on shallow ramps where the trailer is not far into the water, when alone, or have a crosswind or current pushing the boat. Uprights with rollers come fully assembled, ready for installation. Sold in pairs. 1-1/2" Pre-galvanized steel uprights lean outward 15° to cradle the boatGuide-Ons are 21" tall above the frame with 9" roller & 2" roller caps at top & bottomMounting hardware included for frames up to 3" W x 4-1/4"HMouting brackets allow up to 13" of adjustment out from each side of the frame

C.E. Smith 27627 Pvc Post Guide-Ons, 40", 75 Degree Bend, White - 27627 - 618-27627F1

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights

C.E. Smith 27637 Pvc Post Guide-Ons, 65", Hot Dip Galvanized - 27637 - 618-27637F1

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27638 Pvc Post Guide-Ons - 27638 - 618-27638F1

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27640 Pvc Post Guide-Ons, 60", White - 27640 - 618-27640F1

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27646 Pvc Post Guide-Ons, 60", Black - 27646 - 618-27646F1

Allows you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. Mounting hardware included. Sold in pairs. Adjusts out to 13" each Side Fits Frames up to 3" W x 4-1/4" HMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).Check with your state Department of Transportation for restrictions regarding maximum trailer width.

C.E. Smith 27647 Pvc Post Guide-Ons, 40", 75 Degree Bend, Black - 27647 - 618-27647F1

Visual markers when backing trailers down the rampFits frames up to 3" wide by 4-1/4" tallMetal uprights allow for 13" of side adjustment1-1/2"Square 16 ga. pre-galvanized steel uprights

C.E. Smith 27660 2' Bunkboard Guide-Ons - 27660 - 618-27660F1

Carpeted bunkboards provide proper center loading even in wind or side current conditions. Can be mounted on top of frame for extra heightHeight of 21'' with adjustment out to 13" from frame on each sideBoards tilt to hug the hull covered with high grade marine carpet and are untreated Southern yellow pine1-1/2" square pre-galvanized uprights, angled out at 75°

C.E. Smith 27670 Pontoon Pvc Post Guide-Ons - 27670 - 618-27670F1

These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Mounting hardware included. Sold in pairs. Fit up to 3" W x 4-1/4" H frames. 1-1/2" square 16 gauge pre-galvanized steel uprights. 2-3/8" diameter white PVC posts.

C.E. Smith 27671 Pontoon Bunkboard Guide-Ons - 27671 - 618-27671F1

Ideal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Pontoon glides easily past the carpeted bunk boards guiding the pontoon boat onto the trailer. Height is adjustable and is set during install between 24" and 36" above trailer frame. Mount with bunks 2-3" from pontoons on a trailer frame cross member. Galvanized steel construction. Zinc plated hardware. Includes two 24" carpeted bunk boards AND U-bolt mounting brackets.

C.E. Smith 27740 Led Lighted Pvc Post Guide-Ons, 40" - 27740 - 618-27740F1

Post Guide-Ons allow you to see the location of your trailer when it's under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. Mounting hardware and wiring included. Sold in pairs. Fits Frames up to 3" W x 4-1/4" H1-1/2" square, 16 gauge pre-galvanized steel uprightsMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).

C.E. Smith 27760 Led Lighted Pvc Post Guide-Ons, 60" - 27760 - 618-27760F1

Post Guide-Ons allow you to see the location of your trailer when it's under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. Mounting hardware and wiring included. Sold in pairs. Fits Frames up to 3" W x 4-1/4" H1-1/2" square, 16 gauge pre-galvanized steel uprightsMade in the USAFor larger trailer frames check out our Large Frame U-Bolt Kit (11416).Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).

C.E. Smith 3" Bow Bell Roller Assembly - Black TPR

C.E. Smith 3" Bow Bell Roller Assembly - Blue TPR