Select Category
_0x200.jpg)
Forespar Replacement Bracket f/WL-1 Floating Strobe LED Waterlight
Forespar Sta-Plug Emergency Plug
Forespar Sta-Plug Foam Emergency Plug - 150110 - 108-150110F1
The StaPlug is the modern solution for emergency leaks on any boat and for maintenance of valves and thruhulls. The StaPlug is a soft, cone shaped plug solid, spongy and coated with a flexible sealer to deal with any hull breach from a small hole or a large tear from a collision. Unlike old fashioned wooden plugs, StaPlug's soft cone shape form allows it to be compressed by hand or cut to fit into any hole whether in the hull or even in leaky or damaged pipes and other thru-hulls. Keep a couple on hand as the near perfect "just in case". Not for fuel leaks.
Forespar Sta-Plug® Mini Emergency Plug
Forespar T150 Marelon Raw Water Strainer, 1-1/2" - 906166 - 108-906166F1
Consists of a Marelon head and a polycarbonate bucket with a stainless steel screen. The screw on clear bucket has a replaceable gasket for a positive seal and ease of cleaning. The T-Stainer allows lower installations. Includes a mounting bracket that allows ports to face any direction, Flow rate is 40 GPM+
Forespar Tea Tree Power 44oz Refill Pouches (2)-22oz pouches
Forespar Tri-Reacher Whisker Pole - 408201 - 108-408201F1
The whisker pole will allow deeper sailing angles and eliminate the need for constant jibing downwind. On long downwind legs, the additional rigging of fore and after guys (attached to the outboard end) will further stabilize the pole. This will also allow emergency furling of the headsail without the need to go forward and deal with the pole first. The inboard ends are Forespar's time proven 'UTS' style socket end or 'UXP' piston style. The outboard end is our 'UXP' style. The 'UTS' end will only fit the Forespar toggle mast car (#333004). The 'UXP' style fits #331000 RC-125 Ring Car or FC-125 (#332002) mast cars and #332025 fixed mast mounts. For use on boats 31'-40': Stows at just 7', telescopes to 21'. Weighs just 19 pounds.
Forespar Vent Barb - 903004 - 108-903004F1
The MF-846 vent barb assembly option can be used in lieu of the standard MF-841 vent cap/duckbill. This option allows venting to the outside of the hull via a 1/4"(6.35mm) hose.
Forged Safety Hook, Galvanized - 226554 - 343-226554F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged Safety Hook, Galvanized - 226608 - 343-226608F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged Safety Hook, Galvanized - 226653 - 343-226653F1
Drop forged steel with hot galvanized finish. Made in U.S.A.
Forged, Galvanized Anchor Shackle, 1" - 201506 - 343-201506F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
Forged, Galvanized Anchor Shackle, 1/2" - 201308 - 343-201308F1
Hot dipped galvanized. Meets federal specifications RR-C-271D, Type NA. Size, work load and trademark permanently marked on each. Loads are based on safety factor 6 to 1. Bulk.
