Select Category

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000 Airmar has taken its proven Tilted Element™ and broadband technologies and applied them... More Details

DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183 Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately... More Details

Fairing Block for B122 & DST-800L A replacement high-speed fairing block for the B122. This fairing can also be used for the DST800L. Dimensions: 13.5" L x 2.94" W x 2.96" T. This product may not be r... More Details

Fairing Block for B744V Fairings orient the sound beam straight down by mounting the transducer parallel to the water surface. Features: Fairing: High-Performance Dimensions: 13.6” x 3” x 3” This prod... More Details

Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m)... More Details

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP Transducers Features: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of... More Details

Furuno 10-Pin Mix & Match Cable for Low Frequency CHIRP Transducers Features: 10-Pin For Low Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please cont... More Details

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element Transducers For use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts). This product may not be returned to the original point... More Details

Furuno 33' 10-Pin to 10-Pin Extension Cable Features: Transducer Extension Cable 10-Pin(M) to 10-Pin(F)  33' This product may not be returned to the original point of purchase. Please contact the manu... More Details

Garmin 12-Pin Mix & Match Cable for Chirp Transducers Airmar's Garmin Mix & Match Cable Features: 12-Pin Specifically for Chirp Transducers This product may not be returned to the original point of pu... More Details

Garmin 8-Pin Mix & Match Cable for Low-Frequency CHIRP 1kW Transducers Airmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin. Features: 8-Pin Low-Frequency CHIRP Cable   This product may not ... More Details

Garmin 8-Pin Mix & Match Chirp Cable - 1M Airmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin. Features: 8-Pin Length: 1M Chirp Cable This product may not be returned to the original point ... More Details

H2183-10 Solid State Compass with Heading Sensor The Advantage is the Accuracy  Whether you are offshore fishing or just enjoying family time on the water, feel confident and comfortable that the H218... More Details

Humminbird 14-Pin Mix & Match Chirp Cable - 1M Airmar's 14-Pin Mix & Match Chirp Cable for Humminbird Features: Length: 1M 14-Pin Specifically for Humminbird This product may not be returned to the or... More Details

Humminbird 9-Pin Mix & Match Chirp Cable - 1M Airmar's Mix & Match Chirp Cable for Humminbird. Features: Length: 1M 9-Pin This product may not be returned to the original point of purchase. Please con... More Details

In-Hull Tank The tank is cut to the boat’s deadrise angle to ensure that the transducer is properly oriented for optimal performance. Features: 2KW/3KW in-hull tank only Fits: R199, R299, R399, R111, ... More Details

M265 Low-High Chirp 1KW In Hull Transducer *Requires Mix & Match Cable* We know that specific frequencies excel at detecting certain species of fish: Bluefin Tuna—60 kHz, squid—133 kHz, and cod—175 kH... More Details

M265C-LH Low/High CHIRP In-Hull Transducer - Bare Wire The Airmar M265C-LH is a 1,000W transducer designed to work with chirp sonar systems and utilizes the Low and High-Frequency ranges (Frequency Ra... More Details

M265LH 1kW Chirp-Ready In-Hull Transducer for Garmin with 12-Pin Connector Airmar knows that specific frequencies excel at detecting certain fish species: Bluefin Tuna—60 kHz, squid—133 kHz, and cod—1... More Details

M285HW Chirp In-Hull 1kw Transducer Requires Mix and Match Cable The M285HW, is a 1kW, economical Chirp transducer designed for offshore fishing and freshwater anglers. Operating at the high frequency... More Details

Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) bra... More Details

Mix & Match™ Cable, 5-Pin 600W Series with Navico 7-Pin Blue Connector - 8M Works on Airmar Non-CHIRP Transducers with a mix-and-match connector for Lowrance, Simrad, and Navico Transducers. Product S... More Details

MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-s... More Details

MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP Transducers Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m... More Details

MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9M Specifications: Sensor Connector: MM Display Connector: HB Mix and Match Series: 5-Pin 600 Watt Country of Origin: USA Cabl... More Details