Select Category
_0x200.jpg)
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86440 - 241-86440F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86441 - 241-86441F1
PVC pipe guides the boat on safely and gives a visual aid when backing an empty trailer. The non-mar PVC pipe is braced inside with metal tubing going 20" up into the tube, adding strength and impact resistance. All hardware included and is galvanized for corrosion protection. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86465 - 241-86465F1
Bright orange end caps on these PVC guides gives a brighter target when loading a pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel tubing and covered by 2"x 20" PVC pipe. Galvanized guide posts extend fully into the PVC tube for additional strength. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86466 - 241-86466F1
Ideal for jon boats, bass boats and personal watercraft. The guide posts are made of 1-1/2" square, 16-gauge steel tubing and galvanized for long life. Guide covers are made from high impact non-marking molded PVC. Low Rider Guide On's give you the extra advantage of high strength and great looks for your trailer. Mounts to trailer cross members 2"x 2", 2"x 3" and 2"x 4" frames. All mounting hardware included.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86467 - 241-86467F1
Ideal for larger pontoon boats. These guides are designed for rough water loading where high impact guides are required. The guide posts are hot dip galvanized for long life with covers made from high impact non-marking molded PVC. The guide posts are designed to be mounted between the pontoons. Made of 2-1/2" square, 13-gauge steel tubing. Mounts to trailer cross members up to 2" wide by 2" high. All mounting hardware included. Sold in pairs.
Tie Down Engineering Guide On'S - Sold As Pair With Mounting Hardware Included - 86468 - 241-86468F1
When the trailer is submerged, the PVC guide rises upward adding an additional 12" in sight with adjustable viewing sight of 24"- 36" overall height. Bright orange end caps on these PVC guides give you a brighter target when loading your pontoon boat. The guide posts are designed to be mounted between the pontoons. Made of 1-1/2" square, 16-gauge steel galvanized tubing and covered by 2"x 20" PVC pipe. Guide posts extend fully into the PVC tube for additional strength. All mounting hardware included.
Tie Down Engineering Hot Dip Galvanized Split Panel Brackets - Sold As Pair (L & R) - 81235 - 241-81235F1
Sold in pairs (right and left) to accommodate any size roller length. Slot allows vertical adjustment for stabilizing boat on trailer. Slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.
Tie Down Engineering Hot Dipped Galvanized Keel Roller Assembly With 4" Rubber Roller - 86121 - 241-86121F1
Adjustable offset brackets mount on tongue for keel support. Complete with 4" rubber roller (for 2" wide tongue).
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81225 - 241-81225F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 81230 - 241-81230F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hot Dipped Galvanized Steel Bunk Bracket - 86149 - 241-86149F1
Heavy 11 gauge hot dipped galvanized steel brackets mount 2" bunks on edge. Slotted for vertical adjustment to standard or deep-V hulls.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86476 - 241-86476F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size 2" x 2" x 1/2" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber End Cap - 86478 - 241-86478F1
Black poly vinyl rollers are long lasting, will absorb shock, are cut resistant and will not mark your boat. Size: 2-1/2" x 1-1/2" x 5/8" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86480 - 241-86480F1
Black Spool Rubber Roller. Size 4" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86481 - 241-86481F1
Black Spool Rubber Roller. Size 5" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86482 - 241-86482F1
Black Spool Rubber Roller. Size 5" with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86483 - 241-86483F1
5" Black Rubber Center Guide Keel Roller with 5/8" Hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86484 - 241-86484F1
8" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86485 - 241-86485F1
10" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86486 - 241-86486F1
12" Rubber Center Guide Keel Roller with 5/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86487 - 241-86487F1
3" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86488 - 241-86488F1
4" Rubber Bow Rollers with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86489 - 241-86489F1
Rubber "V" Bow Stop, 2" with 3/8" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86490 - 241-86490F1
Rubber "V" Bow Stop, 3" with 1/2" hole.
Tie Down Engineering Hull Sav'R Black Rubber Roller - 86491 - 241-86491F1
Rubber "V" Bow Stop, 4" with 1/2" hole.
