Select Category

1:1 Plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger). Part #:817-008014Manufacturer:WELDMOUNT (CANADA ONLY)Manufacturer Part #:AT-... More Details

Weld Mount AT-8040 is a solvent free, VOC Compliant, 2-part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo and th... More Details

A unique 1:1 adhesive. It has high viscosity and cures in 5 - 6 minutes with a 4 minute working or open time. This makes AT-2010 the ideal adhesive for applications which require an immediate high str... More Details

1.25" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the co... More Details

1.5" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the con... More Details

1.5" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and secu... More Details

1.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details

1" Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the conso... More Details

1" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of t... More Details

2.5" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All s... More Details

2" Tall Stainless Stud w/1/4" x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All stu... More Details

The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10:1 plunger). Replacement plungers are also avail... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

For panel and other small space applications. Molded mount is sized for a 3/16" wide wire tie with a maximum width of .20". Average pull strength is about 50 lbs. and measures .44" square. Use for run... More Details

8040 Acrylic Adhesive with Plunger  AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a cl... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

Set into wet resin during the hull lay up or bonded with our acrylic adhesives. Designed for a 3/8" wide wire tie and has an average pull strength of 150 lbs. Approved for submerged bilge applications... More Details

An anodized aluminum base with a nylon tie mount riveted to the base. The nylon mount swivels 360°, making alignment with the wire harness easier. Designed for a #5 wire tie and has an average pull st... More Details